Professional Documents
Culture Documents
Canvas Wall Power and Data Info
Canvas Wall Power and Data Info
3 5
4-P
ower harnesses are modular, nonhanded, and
install easily without tools; two modular connection
points at the end of each power harness allow
branching of power.
Z
Wall-based Technology Overview
Power/Data Cable Routing and Access
powered 11 16 8 12 4 6
4 Base Raceway
non-powered 63 95 49 73 25 37
Frame Vertical
Cable Pass-Thru
(to route cables non-powered 74 110 57 86 29 44
vertically within frame,
include two openings)
Frame Horizontal
Cable Pass-Thru
(to route cables
horizontally from non-powered 158 237 122 183 62 94
frame to frame)
68"h Frame
(five openings)
Top Channel 32 47 24 37 12 19
5
powered 32 47 24 37 12 19
Ceiling Entry,
Connector
non-powered 45 67 35 52 18 27
Z
HERMAN MILLER 8-WIRE WIRING HARNESS
Harness Harness
Top Top
Neutral 2 N2 White / Red Neutral 2 N2 White / Red
N H N H N H N H
N H N H N H N H G G G G
G G G G
a b ci d
a b c d
Harness Harness
Top Top
Neutral 2 N2 White / Red Neutral 2 N2 White / Red
Neutral 1 N1 White / Black Neutral 1 N1 White / Black
N H N H N H N H N H N H N H N H
G G G G G G G G
a bi ci d a b c dn
CONNECTION TO A GROUNDED RATING: 120/208V, 3-PH WYE, 60Hz, 20 AMP (CSA 15 AMP)
THREE-PHASE SYSTEM WHITE #1, WHITE #2 RATED AT 35 AMP (CSA 26 AMP) MULTIWIRE BRANCH CIRCUIT
L4 PINK PINK
L3 BLUE BLUE
WHITE #2 WHITE #2
GREEN/YELLOW GREEN/YELLOW
GREEN GREEN
WHITE #1 WHITE #1
L2 RED RED
L1 BLACK BLACK
L1 N1 G1 L2 N1 G1 L3 N1 G1 L4 N2 G2 L1 N1 G1 L2 N1 G1 L3 N2 G2 L4 N2 G2
CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT
RECEPTACLE CONNECTIONS (LOAD) "a" "b" "c" "d" "a" "b" "c" "d"
PINK PINK
BLUE BLUE
WHITE #2 WHITE #2
GREEN/YELLOW GREEN/YELLOW
GREEN GREEN
WHITE #1 WHITE #1
RED RED
BLACK BLACK
L1 N1 G1 L2 N2 G2 L3 N2 G2 L4 N2 G2 L1 N1 G1 L2 N1 G1 L3 N1 G1 L4 N2 G1
CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT
"a" "b" "c" "d" "a" "b" "c" "d"
WARNING: RISK OF FIRE OR ELECTRIC SHOCK. THIS OFFICE FURNISHING SYSTEM MAY BE CONNECTED NOTES:
TO MORE THAN ONE SOURCE OF SUPPLY. ALL SOURCES MUST BE DISCONNECTED PRIOR TO
1. NEUTRAL CONDUCTORS ARE 10 GA.
ANY SERVICING. NO SINGLE CIRCUIT MAY BE POWERED BY MORE THAN ONE SOURCE. WHITE #1 HAS BLACK LETTERING AND WHITE #2 HAS RED LETTERING.
2. GREEN/YELLOW CONDUCTOR CAN BE USED AS AN ISOLATED GROUND.
AVERTISSEMENT: CE SYSTEME PEUT ETRE RACCORDE A PLUS D'UNE SOURCE D'ALIMENTATION. TOUTES 3. CSA: 20 AMP CIRCUITS TO USE 20 AMP RECEPTACLES ONLY.
LES SOURCES D'ALIMENTATION DOIVENT ETRE COUPEES AVANT LE DEPANNAGE.
CONNECTION TO MULTIPLE GROUNDED RATING: 120/208V, 3-PH WYE, 60Hz, 20 AMP (CSA 15 AMP)
THREE-PHASE POWER SOURCE WHITE #1, WHITE #2 RATED AT 35 AMP (CSA 26 AMP) MULTIWIRE BRANCH CIRCUIT
L4 PINK
L3 BLUE
WHITE #2
GREEN/YELLOW
GREEN
WHITE #1
L2 RED
L1 BLACK
L1 N1 G1 L3 N1 G1 L2 N2 G2 L4 N2 G2
CIRCUIT CIRCUIT CIRCUIT CIRCUIT
#2 Phillips Screwdriver
! WARNING
Risk of fire or electrical shock. This office furnishing
system may be connected to more than one source of
supply. All sources must be disconnected prior to any
servicing. No single circuit may be powered by more
than one source.
NOTICE
All electrical connections to building electrical sources
must be made by a qualified electrician according to
national, state and local electrical codes.
Z Y
z
! WARNING ! WARNING
Disconnect electrical power before installation. Failure to do All electrical connections must be fully engaged and locked.
so can cause electrical shock and personal injury. Loose connections can cause fire and /or electrical shock.
3
1 Distribution Harness
Receptacle Bracket
Screws
A
Right Hand
Cover Receptacle
Conduit
Slot Tab
Z Y
z
5
1. Return Cover to Body.
Cover
Z Y
z
CANVAS WALL BASED
10-WIRE DEDICATED NEUTRAL WIRING HARNESS
[OPTIONAL CUSTOM PRODUCT]
Common Ground G1 Green or Bare Common Ground G1 Green or Bare Common Ground G1 Green or Bare
Isolated Ground G2 Green / Yellow x Isolated Ground G2 Green / Yellow Isolated Ground G2 Green / Yellow
N H N H N H N H N H N H N H N H N H N H N H N H
G G G G G G G G G G G G
1N 2N 3N 4N 1N 2N 3N 4G 1N 2N 3G 4G
4 general purpose circuits 3 general purpose + 1 isolated circuit 2 general purpose + 2 isolated circuit
N H N H N H N H N H N H N H N H
G G G G G G G G
1N 2G 3G 4G 1G 2G 3G 4G
Product Pathway 4-pr. UTP Cable 4-pr. UTP Cable 4-pr. UTP Cable Fiber Optic Cable
Reference Area (sq. in.) Categories 3,5,5e Category 6 Category 6a
Cable Diameter, in. 0.22 0.25 0.35 .12 x .25
Cable Area, sq. in. 0.03801 0.04909 0.09621 0.03000
Fill Factor 40% 60% 40% 60% 40% 60% 40% 60%
Canvas Wall Based
powered FT110.xxxxJ 1.0 11 16 8 12 4 6 13 20
Base Raceway
non-powered FT110.xxxxN 6.0 63 95 49 73 25 37 80 120
Frame Vertical Cable Pass-Thru
powered FT110. 4.5 47 71 37 55 19 28 60 90
(to route cables vertically within frame,
includes two openngs) non-powered FT110. 7.0 74 110 57 86 29 44 93 140
Frame Horizontal Cable Pass-Thru
(to route cables horizontally from frame to
frame)
powered 4.5 47 71 37 55 19 28 60 90
35h or Frame (two openings) FT110.35
non-powered 6.0 63 95 49 73 25 37 80 120
42h* or 46h Frame (three openings) powered FT110.42 6.75 71 107 55 83 28 42 90 135
Components mounted on top of 42H frame may FT110.46
restrict access to top opening non-powered 9.0 95 142 73 110 37 56 120 180
53h* or 57h Frame ( four openings) powered FT110.53 9.0 95 142 73 110 37 56 120 180
Components mounted on top of 53H frame may FT110.57
restrict access to top opening non-powered 12.0 126 189 98 147 50 75 160 240
powered 11.25 118 178 92 138 47 70 150 225
68h Frame (five openings) FT110.68
non-powered 15.0 158 237 122 183 62 94 200 300
powered 13.5 142 213 110 165 56 84 180 270
79h Frame (six openings) FT110.79
non-powered 18.0 189 284 147 220 75 112 240 360
Top Channel FT110. 3.0 32 47 24 37 12 19 40 60
Cable Tray FT193. 4.67 49 74 38 57 19 29 62 93
powered FT142. 8.9 94 140 73 109 37 56 119 178
Ceiling Entry, End of Run
non-powered FT142. 10.1 106 159 82 123 42 63 135 202
powered FT143 3.0 32 47 24 37 12 19 40 60
Ceiling Entry, Connector
non-powered FT143 4.25 45 67 35 52 18 27 57 85
Top Channel, Thin-Profile Stacking Window FT187 1.0 11 16 8 12 4 6 13 20
8/2/2015
Canvas Data Channel Locations
(46” Frame Shown)
top channel
height above floor
32”
worksurface
21”
10”
3”
data channel
electrical data
receptacle faceplate
39”
37”
32” 33”
worksurface
21”
19”
10”
3” 3”
TIA/EIA-569-B TIA/EIA-569-B
NEMA-equivalent Opening Furniture-size Opening
Standard Screw Mount Snap-in Mount
Single-Gang
Connector Color
Manufacturer Style Model No. Ports Model No. Ports Options
Connector Color
Manufacturer Style Model No. Ports Model No. Ports Options
Siemon Horiz
MAX Series MX-HFP-01-xx 1 MX-MFP-xx** 4 01=Black
MX-HFP-02-xx 2 (** not avail in colors 02 or 80) 02=White
MX-HFP-03-xx 3 04=Gray
MX-HFP-04-xx 4 20=Ivory
80=Lt Ivory
CT Series CT2-HFP-xx 2* CT-MFP-xx** 2
(** not avail in colors 02 or 80)
Note: 'xx' = color Vert
MAX Series MX-FP-S-01-xx 1
MX-FP-S-02-xx 2
MF-FP-S-03-xx 3
http://www.siemon.com MF-FP-S-04-xx 4
MF-FP-S-06-xx 6
TIA/EIA-569-B TIA/EIA-569-B
NEMA-equivalent Opening Furniture-size Opening
Standard Screw Mount Snap-in Mount
Single-Gang
Connector Color
Manufacturer Style Model No. Ports Model No. Ports Options
Snap-in 49910-Hx2 2
http://www.leviton.com 49910-Hx4 4
Connector Color
Manufacturer Style Model No. Ports Model No. Ports Options
Connector Color
Manufacturer Style Model No. Ports Model No. Ports Options
Drawing illustrating
all potential power
and data locations
The cabling is
separated from
the electrical by a
grounded metal frame
8
Single-gang faceplate Back view of faceplate
in lower tile in lower tile
Top view of
shielded data jack termination