————
213 SIMPLIFIED DRAWING
2.3.2.2 Penetrations
‘Actual penetration contours (curves) ate only
to be shown if they contribute significantly 10
the representation, In other cases, the simpli=
fied representation shown in Fig. 106/1 should
be used,
23.2.3 Repeats
of the same items and features should be avoid
ced (Fig, 106/2 ... 106/4), Other features should
bbe represented by centre lines and contours.
2.3.2.6 Hatching and surface structures
Representation of hatching and surface struc-
tures over large areas should be avoided.
Hatching should only follow the outline, and
only part of the surface should be represented,
(Fig. 106/5, 106/6 and 41/4).
simplified
Fi.
060
I tt
OHH t+
058
oe
“he coour ft bale patern is awn with ong aed
ould nora ne
1065
7
,
Fig. 10816
2 Drawings
213 SIMPLIFIED DRAWING wm
213.25. Partial views
Where a parial view is sulfciet, tis not necessary to provide a full view (Fig. 107/1).
simplified fall
ot
2s
[23
tom
243.3 Simplified dimensioning in drawings
In addition to a simplified representation itis algo permitted to simplify the dimensioning,
‘The simplified dimensioning must contain all the necessary characteristics which would be
shown with conventional representation and dimensioning
Simp inesoig i ao ued or dit pod dfn wth CAD models acorn 50672.
21231 Holes and threaded holes (1S0 15786) oneal psn reeseaton
For holes, the first number represents the hole ‘Sapled dmenieing aoiane
diameter and the second che ole depth. A mul- on ow
tplcton sign () is placed between the two 2 2
numbers. | i fl
If there is no depth indication, it is a through or ce cr
a Fig, 10772 210 conv
The shape ofthe bottom of the hole (at or
conical) is not specified via the dimensioning
ig. 1077) 0 a
oes and threaded oles may generally be rep- f —
resented by cente lines or centre crosses (Fig u |
107/2 ... 107/4). or a Zs
For threaded holes, the thread specification is rom | Sete Tee
followed after muiiplicaion sign («) by the vane vin
usable thread lengh Te depth othe or ole es post {(
is added after a slash. The shape ofthe bottom 7 |
ofthe holes not speciedviathe dimensioning I i
(Fig. 1077), - |
(ie. no slash and subsequent number), the core & ‘7 :
hoe is died through Fig, 107).
Figs