21 GEOMETRICAL TOLERANCING
24,7 Examples
Miling arbor
ae the taper as
te eden eo ein fh te denen Assess a
crm
ovina rr ny a
Ball bearing inner rng Dring i
12
(ela0. AB
‘The incon dt fo te postion eran secs
{arya 80 SSH in odo speci och the
{ergs sures the tolerance oes of hls mt be
pees
2 Drawings
2.12 SURFACE TEXTURE 2
242 Surface texture (I$0 1302)
2421 Graphical symbols for i
jcating surface texture
242.11 Basic and expanded graphical symbols
‘The basic graphical symbol consists of two straight lines of unequal length in-
clined at 60° tothe line representing the considered surface (Fig. 97/1), See 2.16,
for dimensions. Fema
‘he basic graphical symbol provides no information about the methed of forming
(wit or without removal of material)
If removal of material - for example, by machining - is required, a bar shall be "#9"?
added to the basic graphical symbol (Fig. 972)
aL
If removal of material is not permitted, a circle shall be added to the basic graphical i.902
symbol (Fig. 973)
242.12 Complete graphical symbol
When complementary requirements for surface texture characteristics have to
be indicated, a line is added to the longer arm of any of the graphical symbols,
in Fig. 97/1. 97/3, as shown in Fig. 90/4 F.s08
4
2 mm > eo
2421.3 Symbol for all surfaces around a 1
workpiece outline
‘When the same surface texture isrequited on all cs
surfaces around a workpiece outline, a ctl is
acided to the complete graphical symbol Fig. 97/4
(Fig 97/5).
ote
The eutn onthe dang epreset the sic sues show on
‘he SOrepaseaaon fe worgee. The fort
eo urcs ance, Faas
222 Complete symbols with complementary requirements
In order to achieve unambiguous definition of surface texture requirements, it may be necessary
to provide additional information. The mandatory postions ofthe various surface texture require-
ments in the complete graphical symbol are shown in Fig, 97/6.
aa kms
At postions ato e
surface texture parameter designation, the numerical limit value ")
second surface texture requirement, if required
‘manufacturing method, treatment, coating
Surface lay and orientation
‘machining allowance
‘Wa doce pce outa
Be seed beter te prior degnton andthe nals eg Fa 2 Gee BO BUD.