S.No
vom Qty
ISCREEN WELL (3.0m ®)
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay,
stiff black cotton, hard red earth, shales murram,
gravel, stony earth and earth mixed with small size of
boulders as directed by Department
For 0 to 2m depth
Cum. 39.59
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay, |
stiff black cotton, hard red earth, shales murram,
gravel, stony earth and earth mixed with small size of
boulders as directed by Department
For 2 to 3m depth
Cum. r 8.78
For 3 to 4m depth
Cum. oO
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay,
stiff black cotton, hard red earth, shales murram,
gravel, stony earth and earth mixed with small size of
boulders as directed by Department
For 4 to S m depth
Cum. -
For Sto 6m depth
cum. :
For 6 to 6.71 m depth
Cum. =
Supplying & laying Reinforced Cement Concrete of M30
grade using machine crushed hard broken granite stone
jelly 20 mm for RCC works in all types of foundations,
floor slabs of all shapes (Excluding cost of providing
centering & fabrication of reinforcement which shall
be measured & paid under separate items) including
curing, complying with standard specifications as
directed by the Departmental Engineer using sulphate
resisting cement.
cum. 42.90
Providing and laying base concrete in foundation using
Plain Cement Concrete 1:3:6 As base course (40 mm)
including consolidation and levelling etc as per standard
specifications
cum. 1.83
Supplying & erecting centering for sides & walls of
[chamber including supports & strutting for plain
surfaces with all cross bracings using 25 mm thick
boards suitable purloined over silver oak (country
wood) joists of size 10 x 6.5 cm spaced at about 90 cm
centre to centre & supported by casuarinas props 10 cm
to 13 cm diameter spaced at about 75 cm centre to
centre etc, complete complying with standard
specifications. Centering for RCC works below GL. (wall).
Sqm. 78.26S.No Description of work uoM Qty
Supplying, fabricating & placing in position MS or
deformed steel bars for all RCC items of work including
cost of steel transporting, straightening, cutting,
bending, cranking, binding etc. including cost of binding
7” | wire charids, laps to fix the reinforcement in all Lae ay
Positions, all labour & materials complete complying
with standard specifications & drawings as directed by
Ithe Departmental Engineer.
Refilling the trenches with suitable excavated earth
available in layers of 150 mm thick, watering, ramming
5 |e. consalidation as.directed by the Departmental Gis; as
Engineer.
g_ | Tansportation of earth from the site to disposal site at | a —
{a minimum distance of 5 km from the site
Providing and fixing of MS screens of dimensions as
10 [Shown in drawings with MS flats of 20x 50mm with ofc |, rea
spacing of 25 welded to angle frame of 100 x 100 x8
mm etc all complete
[27 ]Ms Rugs No 24.00 |
GRIT WELL (2.0m ®) (=
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay,
12 |stiff black cotton, hard red earth, shales murram, 0
gravel, stony earth and earth mixed with small size of
boulders as directed by Department
For 0 to 2 m depth Cum. 22.64
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay,
13 |stiff black cotton, hard red earth, shales murram, 0
gravel, stony earth and earth mixed with small size of
boulders as directed by Department
a_|For 2 to 3m depth Cum. 11.31
b_|For 3 to 4 m depth Cum. 6.49
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay,
14 |stiff black cotton, hard red earth, shales murram, 0
gravel, stony earth and earth mixed with small size of
boulders as directed by Department
[a |For 4to5 mdepth cum. mali
b_ [For 5 to6 mdepth Cum. :
c_|For6to7mdepth cum. -
d_ |For 7 to 7.81 m depth Cum. -S.No
Description of work
uom
Qty
15
| Supplying & laying Reinforced Cement Concrete of M30
Igrade using machine crushed hard broken granite stone
jelly 20 mm for RCC works in all types of foundations,
floor slabs of all shapes (Excluding cost of providing
centering & fabrication of reinforcement which shall
be measured & paid under separate items) including
curing, complying with standard specifications as
directed by the Departmental Engineer using sulphate
resisting cement,
cum.
45.88
16
Providing and laying base concrete in foundation using
Plain Cement Concrete 1:3:6 As base course (40 mm)
including consolidation and levelling etc as per standard
specifications
Cum.
1.02
a7
[Supplying & erecting centering for sides & walls of
[chamber including supports & strutting for plain
surfaces with all cross bracings using 25 mm thick
boards suitable purloined over silver oak (country
}wood) joists of size 10 x 6.5 cm spaced at about 90 cm
centre to centre & supported by casuarinas props 10 cm|
to 13 cm diameter spaced at about 75 cm centre to
centre etc. complete complying with standard
specifications. Centering for RCC works below GL (wall).
sqm.
89.09
18
Supplying, fabricating & placing in position MS or
deformed steel bars for all RCC items of work including
cost of steel transporting, straightening, cutting,
bending, cranking, binding etc. including cost of binding
jwire charids, laps to fix the reinforcement in all
positions, all labour & materials complete complying
Iwith standard specifications & drawings as directed by
ithe Departmental Engineer.
MT
5.97
19
Refilling the trenches with suitable excavated earth
available in layers of 150 mm thick, watering, ramming
& consolidation as directed by the Departmental
Engineer.
cum.
17.96
20
Transportation of earth from the site to disposal site at
ja minimum distance of 5 km from the site
Cum.
22.50
21
Ms Rugs
No
24.00
WET WELL (3m)
22
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay,
stiff black cotton, hard red earth, shales murram,
gravel, stony earth and earth mixed with small size of
boulders as directed by Department
For 0 to 2 mdepth
‘Cum.
56.30S.No Description of work
vom
Qty
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay,
23 |stiff black cotton, hard red earth, shales murram,
gravel, stony earth and earth mixed with small size of
boulders as directed by Department
a_|For2to 3m depth
‘Cum.
28.16
For 3 to 4m depth
Cum.
27.88
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay,
24 |stiff black cotton, hard red earth, shales murram,
gravel, stony earth and earth mixed with small size of
boulders as directed by Department
For 4 to 5 m depth
Cum
For 5 to. 6 m depth
Cum.
For 6 to 7 m depth
‘cum
For 7 to 8m depth
‘Cum.
For 8 to 9m depth
Cum.
aofololela
For 9 to 9.41 m depth
‘Cum.
Supplying & laying Reinforced Cement Concrete of M30
lgrade using machine crushed hard broken granite stone
lielly 20 mm for RCC works in all types of foundations,
floor slabs of all shapes (Excluding cost of providing
centering & fabrication of reinforcement which shall
be measured & paid under separate items) including
curing, complying with standard specifications as
directed by the Departmental Engineer using sulphate
resisting cement,
25
cum.
122.09
Providing and laying base concrete in foundation using
Plain Cement Concrete 1:3:6 As base course (40 mm)
including consolidation and levelling etc as per standard
specifications
26
cum.
2.65
[Supplying & erecting centering for sides & walls of
|chamber including supports & strutting for plain
surfaces with all cross bracings using 25 mm thick
boards suitable purloined over silver oak (country
wood) joists of size 10 x 6.5 cm spaced at about 90 cm
centre to centre & supported by casuarinas props 10 cm
|to 13 cm diameter spaced at about 75 cm centre to
icentre etc. complete complying with standard
specifications. Centering for RCC works below GL (wall)
27
Sqm.
194.31
[Supplying, fabricating & placing in position MS or
deformed steel bars for all RCC items of work including
cost of steel transporting, straightening, cutting,
bending, cranking, binding etc, including cost of binding
lwire charids, laps to fix the reinforcement in all
positions, all labour & materials complete complying
lwith standard specifications & drawings as directed by
|the Departmental Engineer.
28
MT
15.88S.No}
Description of work
uom
Qty
29
Refilling the trenches with suitable excavated earth
available in layers of 150 mm thick, watering, ramming
}& consolidation as directed by the Departmental
Engineer.
cum.
40.54
30
Transportation of earth from the site to disposal site at
ja minimum distance of S km from the site
Cum.
86.22
31
MS Rugs
No
11.00
TOTAL (A)
Annexure (Control Room SPS Civil Work)
S.No|
Description of Work
uoM
Qty
[Earth work excavation for foundation & depositing on
lbank with an initial lead of 10 m & lift of 2 m for depths
in hard stiff clay, stiff black cotton, hard red earth mixed
Iwith small sized boulders & hard gravely soil, including
Jdewatering of water etc.,
cum:
230.76
[Supplying and filling with sand for foundation and
basement including watering consolidating ramming etc
complete,
Cum.
63.72|
Providing and laying base concrete in foundation using
Plain Cement Concrete 1:4:8 including consolidation
jand levelling etc as per standard specifications
cum.
14.07
Providing Form work with centering for soffits of
reinforced cement concrete slab or plain surfaces
including strutting up to 3m.
47.715|
Reinforced cement concrete 1:2:4 excluding form work
land reinforcement for RCC works as detailed in
drawings and as per standard specifications and as
directed by the Departmental Engineer etc. complete
cum.
31.275)
Laying C.C. 1:2:4 for RCC sunshade work using 20mm
hard broken stone jelly 80mm thick at wall end and
50mm thick at free end projecting 600mm from wall
face moulded along with RC lintels excluding the cost
lof reinforcement including centering compacting curing
jetc. complete as directed by Engineer in-charge
cum.
10.83]
Reinforcement for RCC works
kg
3151)
Construction of brick masonry with class Il bricks in CM
1:6 in foundation including curing etc all complete as
per standard specifications.
cum.
90.045]
[Construction of brick masonry with class II bricks in CM
1:6 in superstructure including curing etc all complete
las per standard specifications.
Cum.
92.25]
Inside plastering in CM 1:4, 12 mm thick including
necessary scaffolding, water the surface etc all
complete as per standard specification.
Sam.
396.08
[Outside plastering in CM 1:4, 15 mm thick including
necessary scaffolding, watering the surface etc all
icomplete as per standard specification.
Sqm.
359.6|S.No Description of work
uom
Qty
12
(Ceiling plastering in CM 1:3, 12 mm thick including
necessary scaffolding, water the surface etc all
complete as per standard specification.
Sqm.
141.62,
13
Laying cement concrete flooring of 100 mm thick with
Plain Cement Concrete 1:4:10, using 40 mm HBG stone
land smooth finish etc all complete as per standard
[specifications
Cum.
125.57]
14
|Granolithic flooring 40mm thick cement concrete
mix using 3-10mm chips and top surface rendered
smooth with cement including thread lining etc. as per
directed by Engineer in-charge
sq.m
125.57
15
Refilling in excavated trenches and basement using
lexcavated earth including complete consolidation and
levelling as per standard specifications
cum.
144.45)
16
Concrete with broken brick jelly 20mm gauge in pure
slacked lime over RCC roof slab in the proportion of
32:12 1/2 no sand to be used well beaten with wooden
beaters with the required depth of 80mm thick and
giving required slope and thickness to roof as required
jetc. complete.
13.005)
7
ing and fixing Heat Resistant Terrace Tiles (300
mm x 300 mm x 20 mm) with SRI (solar refractive index)
> 78, solar reflection >0.70 and initial emittance >0.75
Jon waterproof and sloped surface of terrace, laid on 20
mm thick cement sand mortar in the ratio of 1:4 (1
cement : 4 coarse sand) and grouting the joints with mix|
lof white cement & marble powder in ratio of 1:1,
including rubbing and polishing of the surface up to 3
icuts complete, including providing skirting up to 150
mm height along the parapet walls in the same manner.
Sqm.
162.62)
18
[White washing the plastered walls and ceiling with best
shell lime including preparation of surface and neat
finishing with 2 coats etc, complying with standard
specification and as directed by the Departmental
Engineer etc, complete (Inside & outside)
Sqm.
879.12|
19
[Colour washing the plastered walls and ceiling with
japproved colour over the white washed area with neat
finishing of 2 coats etc, complying with standard
[specification and as directed by the Departmental
Engineer etc, complete (Inside & outside) - same as
_|white washing
Sqm.
879.12|
20
Providing and fixing ISI marked flush door shutters
{conforming to IS : 2202 (Part |) decorative type, core of
lblock board construction with frame of 1 st class hard
wood and well matched teak 3 ply veneering with
vertical grains or cross bands and face veneers on both
faces of shutters.
ja) Doors
Sqm.
12.6S.No.
Description of work
UOM
21
" [Teakwood panelled door in double shutter with frames |
100x75mm side verticals and top. A shutter shall be
40mm thick with moulded panels in 20mm thick 4 no.
of iron hold fast fixed in C.C 1:2:4 using 6 to 10mm chips
3nos. Of butt hinges 125mm long including wind
appliances, furniture iron fittings, one No. of iron pad
lock 15cm long for locking arrangements and fixed in
Position etc complete.
Ib) Window
Sqm.
1
17.28
22
Teakwood T.W glazed swig ventilator with frame
'75x60mm all-round shutter shall be 40mm thick 3 mm
glass panels including 20x20 teak fillets, sash centres,
brass rings iron leaf and window card applications
including fixing and position etc. complete.
Sqm.
0.675
23
PVC syntax door in single shutter with frame of size
100x75mm at side verticals on the top with locking
arrangement etc. complete for toilet
Sqm.
2.37
24
Providing and fixing in position of Rolling Shutter of size
(2.5 x3 m) including all necessary permanent fittings as
per standard specifications and as directed by the
Departmental Engineer etc, complete
Sqm.
11.25
25
26
Supplying and fixing of MS grating with Chequered plate
of 6 mm thick over the cable trench as directed by
Departmental Engineer etc all complete as per standard
specifications.
Painting of panelled doors and windows with 2 coats of
enamel paint including a coat of primer, including
scraping, sand papering and preparation of surface
including cost of brushes, with neat finishing etc all
complete as per standard specifications.
|
sqm.
sqm.
16.05
181.37]
27
28
Painting of Rolling shutter with 2 coats of paint
including a coat of primer, scraping, sand papering and
preparation of surface including cost of brushes, with
neat finishing etc all complete as per standard
specifications.
[Supplying fixing 75mm dia, AC rainwater down fall pipe
including cost of bends, anchors etc.
Sqm.
RMT
24.75
30
29
Providing fixing MS grills for window including one coat
lof primer with red lead and painting etc. complete as
directed,
Sqm.
150]
30
Provision for Rainwater harvesting arrangements as per
municipal specifications
Job
1sS.No.
uoM Qty
Earth work excavation for foundation & depositing on
bank with an initial lead of 10 m & lift of 2 m for depths
1 in hard stiff clay, stiff black cotton, hard red earth mixed| Cum. 159.18
/with small sized boulders & hard gravely soil, including
dewatering of water etc.,
Providing and laying base concrete in foundation using
2. |Plain Cement Concrete 1:4:8 including consolidation cum. 9.63
land leveling etc as per standard specifications
[Construction of brick masonry with class | bricks in CM r
3 |2:6 in foundation including curing etc all complete as cum. | 49.53
per standard specifications.
Construction of brick masonry with class II sin CM
4 |1:6 in superstructure including curing etc all complete cum. | 55.05
las per standard specifications.
Inside plastering in CM 4:4, 12 mm thick including
5 |necessary scaffolding, water the surface etc all Sqm. | 216.93
complete as per standard specification.
[Outside plastering in CM 1:4, 20 mm thick including
6 Jnecessary scaffolding, watering the surface etc all sqm. | 276.18
complete as per standard specification.
(Ceiling plastering in CM 41:4, 12 mm thick including
7 |necessary scaffolding, water the surface etc all sqm. | 63.63
complete as per standard specification.
Reinforced cement concrete 1:2:4 including form work ia
land reinforcement for top roof slab andsunshade as
8 |detailed in drawings and as per standard specifications | Cum. | 11.94
and as directed by the Departmental Engineer etc.
complete
Laying cement concrete flooring of 100 mm thick with
Plain Cement Concrete 1:2:4, using 10 to 12.5 mm HBG
stone and smooth finish etc all complete as per
standard specifications
Sqm. | 37.23
Refilling in excavated trenches and basement using
10 Jexcavated earth including complete consolidation and Cum. | 116.07
leveling as per standard specifications
White washing the plastered walls and ceiling with best
shell lime including preparation of surface and neat
11 finishing with 2 coats etc, complying with standard Sam. | 562.41
specification and as directed by the Departmental
Engineer etc, complete (Inside & outside)
[Colour washing the plastered walls and ceiling with
lapproved colour over the white washed area with neat
finishing of 2 coats etc, complying with standard
specification and as directed by the Departmental
[Engineer etc, complete (Inside & outside) - same as
white washing
12 Sqm. | 562.41S.No Description of work
vom
Qty
Supplying and fixing of MS grating with Chequered plate|
lof 6 mm thick over the cable trench as directed by
Departmental Engineer etc all complete as per standard
specifications.
13
Sqm:
26.4
Providing and fixing in position Country wood paneled
14 |doors and windows as specified below and as per
[standard specifications
Sqm.
10.62
Painting of paneled doors and windows with 2 coats of
}enamel paint including a coat of primer, including
15 |scraping, sand papering and preparation of surface
including cost of brushes, with neat finishing etc all
|complete as per standard specifications.
Sqm.
10.62
TOTAL [C]
Annexure (Lifting Station Civil Work)
S.No| Description of work
om
Qty
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2m in hard stiff clay,
1_ stiff black cotton, hard red earth, shales murram,
gravel, stony earth and earth mixed with small size of
boulders as directed by Departmental engineer
For Oto 2m depth
Cum.
143.28
Earth work excavation and depositing on bank with
initial lead of 10 m and initial lift of 2 m in hard stiff clay,
2. |stiff black cotton, hard red earth, shales murram,
{gravel, stony earth and earth mixed with small size of
boulders as directed by Department engineer
For 2 to 3 mdepth
Cum.
71.64
For 3 to 4 m depth
Cum.
71.64
For 4 to 5 m depth
Cum.
71.64
For Sto 6 m depth
Cum.
71.64
For 6 to 7 m depth
Cum.
71.64
For 7 to 8 m depth
Cum.
5.97.
Jor |-n]o fale lofo
For 8 to 8.439 depth
Cum.
2.985.
Supplying & laying Reinforced Cement Concrete of M30
jgrade using machine crushed hard broken granite stone
lielly 20 mm for RCC works in all types of foundations,
floor slabs of all shapes (Excluding cost of providing
3 centering & fabrication of reinforcement which shall
be measured & paid under separate items) including
curing, complying with standard specifications as
directed by the Departmental Engineer using sulphate
resisting cement.
cum.
277.93S.No Description of work
UOoM
Qty
Providing and laying base concrete in foundation using
Plain Cement Concrete 1:3:6 As base course (40 mm)
including consolidation and levelling etc as per standard
specifications
6.6
Supplying & erecting centering for sides & walls of
chamber including supports & strutting for plain
surfaces with all cross bracings using 25 mm thick
boards suitable purloined over silver oak (country
5 |wood) joists of size 10 x 6.5 cm spaced at about 90 cm
centre to centre & supported by casuarinas props 10 cm|
to 13 cm dia.meter spaced at about 75 cm centre to
centre etc. complete complying with standard
/specifications. Centering for RCC works below GL (wall).
Sqm
340.21
Supplying, fabricating & placing in position MS or
deformed steel bars for all RCC items of work including
cost of steel transporting, straightening, cutting,
bending, cranking, binding etc. including cost of binding
wire charids, laps to fix the reinforcement in all
Positions, all labour & materials complete complying
with standard specifications & drawings as directed by
ithe Departmental Engineer.
ke
19454
Refilling the trenches with suitable excavated earth
available in layers of 150 mm thick, watering, ramming
/& consolidation as directed by the Departmental
Engineer.
98.47
Carting of excavated surplus soil away from site
including cost for all items of work, men, materials,
machinery, equipment as per standard specification and|
jas directed by Engineer-in- charge
411.96
9 [MS encapsulated PVC steps
No.
190
TOTAL (D)
Annexure (Sewer Collection Network)
S.No Description of work
Qty
vom
PART A - (1) Providing Laying and Commissioning of
[Sewer Collection Network including house sewer
lconnection, Nullah, roads railway crossing using
Trenchless Technology and
Road Restoration in Cantonment Board
Earth Work Excavation‘S.No
Description of work
vom
Qty
[Earth work excavation for foundation & depositing on
bank with an initial lead of 10 m & lift of 2 m for depths
in hard stiff clay, stiff black cotton, hard red earth mixed
with small sized boulders & hard gravely soil including
|dewatering of water as and when required, barricading
with safety lamps etc all complete as per standard
specification as directed by the Departmental Engineer.
ja) For 0 to 2m depth
11058.99
Cum.
[Earth work excavation for foundation & depositing on
bank with an initial lead of 10 m & lift of 2 m for depths
in soft disintegrated Rock when required, barricading
[with safety lamps etc all complete as per standard
specification as directed by the Departmental Engineer.
For 2 to 3 m depth.
171.825
Cum
For 3 to 4 m depth.
Cum.
[Earth work excavation and depositing on bank with
ial lead of 10 m and initial lift of 2 m in
medium rock and dense medium rock not required
blasting as directed by Departmental engineer.
For 4 to 5 m depth
Cum.
For 5 to 6 m depth
Cum.
Shoring & strutting the sides of trench when depth of.
lexcavation exceeds 2 m in loose soil
including cost of labour charges for installation &
removal of planks & scantlings etc or using steel sheet
plate complete & as directed by the Engineer-in-Charge.
fa) For 2 to 3 m Depth
425.26
Cum:
b) For 3 to 4m Depth
Cum.
Refilling the trenches with suitable excavated earth
available along the alignment after the pipes & specials
are laid, jointed & tested in layers & watering, ramming
}& consolidation directed by the Engineer-in-Charge.
10790.305
Cum.
Dismantling of existing CC pavement and depositing of
dismantled materials along roadside or at a safe
location as directed by Engineer-in-Charge
1994.895
cum.
Restoration of Road along the excavated and refilled
portion of sewer pipeline trenches with gravel filling for
20 mm thk, Cement contrete of
trap/granite/quartzite/gneiss metal for PCC work
including normal dewatering, compaction, finishing and
curing. Etc. complete
cum.
Providing and Laying sand bedding in pipe trenches as,
per the direction of Engineer in charge.
cum.
MATERIALS.S.No Description of work vom Qty
DI (CL) pipes of class K7 or K9 as per 1S 8329/2000 with
sulphate resistance cement with inner lining of high
{alumina cement as per IS:783 with epoxy coating
Joutside of the spigot portion and poly solution coating
inside the socket portion, lowering into trenches, laying
to proper grade and alignment, cutting the pipes true to
9 axis & jointing the pipes & specials with rubber rings 0
including cost of lubricant, testing the pipe to the
required pressure including barricading, provision of
Jdanger lights, arranging for watch & ward etc,,
lcomplete as per specifications at different depths. Rates|
Iquoted is only for Laying
i_|A) 150 mm dia. pipes 0
a_[a) For Oto 2m depth 4376.65_|_RMT
b_[b) For 2to.4m depth. 3815 | RMT.
ii_|8)200 mm dia. pipes 0
@_|a) For 0to 2 mdepth 6164.35 | RMT
b |b) For2 to 3mdepth 469.2 [RMT
b) For 3 to 3.5 m depth =| RMT
iii_|c) 250 mm dia. pipes 0
a_[a) For Oto 2m depth 2665 | RMT
b_[b)For2 to 3mdepth 32 RMT
€_|b) For 3 to 3.5 m depth =| RMT
iv_|D) 300 mm dia. pipes 0
a_[a) For Oto 2m depth ae
b_[b) For 2 to 3 mdepth 75 RMT
¢_|b) For 3 to 3.5 m depth =| RMT
v_|E) 350 mm dia. pipes 0
a_|2)For Oto 2mdepth 531.9 [RMT
b |b) For 2 to 3m depth 83.95 [_ RMT.
¢ |b) For 3 to 3.5m depth =| Rut
[Supply of Dl (CL) pipes of class K7 or K9 as per IS,
{8329/2000 with sulphate resistance cement
with inner lining of high alumina cement as per 1S:783
with epoxy coating outside of the spigot portion and
poly solution coating inside the socket portion, lowering,
10 [inte trenches, laying to proper grade and alignment, "
[cutting the pipes true to axis & jointing the pipes &
specials with rubber rings including cost of lubricant,
testing the pipe to the required pressure including
lbarricading, provision of danger lights, arranging for
latch & ward etc., complete as per specifications at
different depths
i_A) 200 mm dia. pipes 0
a_[a) For 3 to 4m depth = [Rut
b) For 4 to Sm depth =| RMT
B) 250 mm dia. meter 5
a_|a)For3 to 4m depth =| Rw
lb) For 4 to 5 m depth = [RwDescription of work vom ty
[C) 300 mm dia. meter 0
a_|a) For 3 to4m depth =| RMT
[b) For 4 to Sm depth =_ [RMT
¢ [Ventilating shafts 25.5) Nos.
[SEWER APPURTENANCES 0
[Construction of Pre-cast / cast-at-site RCC manholes of
Hollowing sizes on sewer lines as per
detailed drawing including supplying & fixing 600 mm
dia. FRC Manholes frame & cover & encapsulated
plastic steps complete as per the spe
including earthwork excavation on all soils inclu
rock, pumping & bailing out water where necessary,
11 |/2¥ing base cement concrete in CC RCC 1:2:4 in
structure, plastering internal and external with 12mm
{thick cement plaster in CM 1:3, benching concrete
in CC 1:2:4 including refilling of trenches,
lbarricading, provision of danger lights, watch & ward &
|depositing surplus earth at places directed by the
[Engineer-in-Charge etc all complete as per standard
drawing.
i_|Type 1-750x 1200 mm 0
‘a_[a) Less than 0.9 m 0s No
ii_[Type lt - 900 x 1200 mm 0
a |o.90to1.0 180.5 No
b |ttois 825 No
¢_[15-2.0m 80 No
d_[20-2.5m 38 No
[Construction of circular Precast or cast-at-site RCC
manhole clear internal 1,500 mm dia..,
including earthwork excavation in all type of soils, rock,
bailing of water, RCC 1:2:4 structure, up to 2.5m depth
land above over a bed of cement concrete in 1:3:6,
internal plastering in CM 1.3 20 mm thick and external
az [Plastering in cement mortar 1:5, 12mm thick, and a
finished smooth with a floating coat of neat cement,
PCC 1:2:4 for benching, channelling, including, providing|
& fixing 600mm circular FRC frame & cover, extra heavy
duty, PVC encapsulated steps, refilling with excavated
learth, etc complete, all as specified & directed by the
Engineer-in-Charge
i_|Type ill - 1500 mm diameter 0
a_[a)2.5to3.0mdepth 435 No
b_[b) 3.0 03.5 mdepth 24 No
¢_|c)3.5t04m depth 1B No.
d_[d) 4.0t0.4.5 m depth 6 No.
e [e)45toSmdepth = No,
£_|f)5.0t05.5 mdepth = No
& |g)5.5 to 6.0 m depth 5 NoS.No Description of work
vom
Qty
[Construction of drops excluding manholes at various
depths per drawing for pipes & specials incl.
13 |connections, earthwork excavation, concreting &
refilling sides of foundation with excavated earth etc.,
lcomplete.
fa) up to 1m depth
No
b) up to 2m depth
No
ic) up to 3m depth
No.
id) up to 4m depth.
No
le) up to Sm depth
No
a}o fale lela
F) up to 6m depth
No
HOUSE SEWER CONNECTIONS
[Earth work excavation for foundation & depositing on
bank with an initial lead of 10 m & lift of 2 m for depths
in hard stiff clay, stiff black cotton, hard red earth mixed
|with small sized boulders & hard gravely soil including
|dewatering of water as and when required, barricading
with safety lamps etc all complete as per standard
specification as directed by the Departmental Engineer.
14
5628.69
Cum,
[Supplying & Laying the following size of DI pipes &
lowering into trenches, laying to proper grade
(60%), Alignment, Joining the pipes & specials with neat
cement & hemp yarn/tarred yarn & caulking both dry &
15 |wet condition, testing the lines as directed by the
|departmental engineer including barricading, provision
Jof danger lights, arranging for watch & ward etc.,
compete as per specifications at different depths. (IS
651:1980)
[100 mm dia.
10423.5,
Refilling the trenches with suitable excavated earth
available along the alignment after the pipes & specials
16 [are laid, jointed & tested in layers & watering, ramming
& consolidation directed by the departmental engineer,
54a4.585
cum.
providing and construction additional lateral
rectangular Type 1 manholes in small cross streets and
{tenements where Households are below adjoining Road
Level including provision of rider main connecting the
shallow manholes for interconnection to the primary
lateral sewers downstream at a suitable invert-
17 |matching cross-section. However this item excludes
[cost of any additional pumping from household septic
{tanks that are in households located below road level.
Provision to be as directed by Dept. Engineer and is to
be field operated upon obtaining necessary approval
{from pertinent authorities.
3475
No.
INH / SH / Major Rd CrossingsS.No Description of work
uom
Manufacture and supply of following size of MS. pipe
required wall thickness with 406 micron thick internal
land external food grade epoxy coating (as per IS7323)
18 [duly rolling the plate to the convenient length, welding
the joints. The rate includes the cost of raw materials,
labour tools and plants, transportation etc
Ms Casing pipe of 610 mm diameter and 12.5 mm.
19 |thickness for 250 mm dia. up to 350-mm sewer
main crossing (gravity and pumping)
45
RMT
MS Casing pipe of 355.6 mm diameter and 8 mm.
20
thickness for up to 200 mm gravity main crossing
RMT
Laying of following Pipe by pushing by trenchless -
pushing and jacking method. This includes
construction of suitable size of driving pit, receiving pit
jand construction of RCC thrust wall / bed including
Jearthwork excavation in all type of soil including SDR,
hard rock and other civil works including shoring,
strutting and shuttering complete and lowering, the
[following size of MS encasing pipe into driving pit by
lusing contractors crane machineries and jointing MS
pipes by electric welding laying the encasing pipe across.
the railway line / National Highways / State Highways
road / Canal crossing etc., by pushing / jacking method
(trenchless technology method) using contractor's
machineries such as cranes, jacks, jacking materials,
generator, welding machineries, comprising jack
hammer and other equipments etc,, grouting the
annular space between the casing pipe and excavated
hole, under
2a
[traffic condition in all type of soil including SDR, Hard
rock without interfering and causing any hindrance to
the movementoftrains/buses/lorries/or any other
lvehicle without any disturbances to the
railway/road/canal formation etc., including
bailing/pumping of water wherever necessary without
affecting any installation like water supply pipe line/
telephone cable, electric cable etc, passing nearby area
22 Jand scooping the earth inside the pipes and pit and
[depositing the surplus earth in a convenient place and
levelling the site after completion of entire work as
directed by site engineers. The rate includes the cost of
driving pit, thrust bed/wall and receiving pit to the
Jdepth of Om to 3m and excluding the cost of MS pipes
letc., complete.
a_|Drilling of 600mm diameter MS casing pipe
45
RMT |S.No Description of work
vom
Qty
b [Drilling of 350mm diameter MS casing pipe
RMT.
[Supply of DI (CL) pipes of class K7 or K9 as. per IS
18329/2000 with sulphate resistance cement
with inner lining of high alumina cement as per |S:783
lwith epoxy coating outside of the spigot portion and
oly solution coating inside the socket portion, lowering
into trenches, laying to proper grade and alignment,
cutting the pipes true to axis & jointing the pipes &
specials with rubber rings including cost of lubricant,
testing the pipe to the required pressure including
barricading, provision of danger lights, arranging for
watch & ward etc., complete as per specifications at
different depths.
23
a_|250 to 350 mm dia... DI
45
RMT
b_[200 mm dia. DI
60
RMT
(Canal / Nullah Crossings
Manufacture and supply of following size of MS pipe
Fequired wall thickness with 406 micron thick internal
land external food grade epoxy coating (as per IS7323)
24 |duly rolling the plate to the convenient length, welding
the joints. The rate includes the cost of raw materials,
labour tools and plants, transportation etc
MS Casing pipe of 610 mm diameter and 12.5 mm
25 | thickness for 250 mm dia. up to 350-mm sewer
main crossing (gravity and pumping)
75
RMT
MS Casing pipe of 355.6 mm diameter and 8 mm
2
S thickness for up to 200 mm gravity main crossing
775
RMT
Laying of following Pipe by pushing by trenchless -
pushing and jacking method. This includes construction
lof suitable size of driving pit, receiving pit and
Jconstruction of RCC thrust wall / bed including
Jearthwork excavation in all type of soil including SDR,
lhard rock and other civil works including shoring,
strutting and shuttering complete and lowering, the
following size of MS encasing pipe into driving pit by
using contractors crane machineries and jointing MS
pipes by electric welding laying the encasing pipe across
{the railway line / National Highways / State Highways
road / Canal crossing etc., by pushing / jacking method
(trenchless technology method) using contractor's
machineries such as cranes, jacks, jacking materials,
lgenerator, welding machineries, comprising jack
hammer and other equipments etc., grouting the
Jannular space between the casing pipe and excavated
hole, under
27S.No|
Description of work
UOM
Qty
28
traffic condition in all type of soil including SDR, Hard
Fock without interfering and causing any hindrance to
ithe movement of trains/buses/lorries/or any other
vehicle without any disturbances to the
railway/road/canal formation etc., including
bailing/pumping of water wherever necessary without
affecting any installation like water supply pipe line/
[telephone cable, electric cable etc., passing nearby area
land scooping the earth inside the pipes and pit and
depositing the surplus earth in a convenient place and
levelling the site after completion of entire work as
directed by site engineers. The rate includes the cost of
(driving pit, thrust bed/wall and receiving pit to the
depth of Om to 3m and excluding the cost of MS pipes
etc, complete.
Drilling of 600mm diameter MS casing pipe
75
RMT
Drilling of 350mm diameter MS casing pipe
715.
RMT
29
[Supply of DI (CL) pipes of class K7 or K9 as per IS
8329/2000 with sulphate resistance cement with inner
lining of high alumina cement as per IS:783 with epoxy
|coating outside of the spigot portion and poly solution
coating inside the socket portion, lowering into
trenches, laying to proper grade and alignment, cutting
the pipes true to axis & jointing the pipes & specials
with rubber rings including cost of lubricant, testing the
pipe to the required pressure including barricading,
provision of danger lights, arranging for watch & ward
letc., complete as per specifications at different depths.
250 to 350 mm dia... DI
75
RMT
200 mm dia. DI
77.5
RMT.
Railway Crossing
30
Manufacture and supply of following size of MS pipe
required wall thickness with 406 micron thick internal
and external food grade epoxy coating (as per 1S7323)
Jduly rolling the plate to the convenient length, welding
the joints. The rate includes the cost of raw materials,
labour tools and plants, transportation etc
31
MS Casing pipe of 610 mm diameter and 12.5 mm
thickness for 250 mm dia, up to 350-mm sewer main
[crossing (gravity and pumping)
20
RMT
32
MS Casing pipe of 355.6 mm diameter and 8 mm
thickness for up to 200 mm gravity main crossing
10
RMTS.No
Description of work
UOM
Qty
33
Laying of following Pipe by pushing by trenchless ~
pushing and jacking method. This includes construction
lof suitable size of driving pit, receiving pit and
construction of RCC thrust wall / bed including
jearthwork excavation in all type of soil including SDR,
hard rock and other civil works including shoring,
strutting and shuttering complete and lowering, the
following size of MS encasing pipe into driving pit by
lusing contractors crane machineries and jointing MS
pipes by electric welding laying the encasing pipe across
the railway line / National Highways / State Highways
road / Canal crossing etc., by pushing / jacking method
(trenchless technology method) using contractor's
machineries such as cranes, jacks, jacking materials,
igenerator, welding machineries, comprising jack
hammer and other equipments etc., grouting the
jannular space between the casing pipe and excavated
hole, under traffic condition in all type of soil including
[SDR, Hard rock without interfering and causing any
hindrance to the movement of trains/buses/lorries/or
any other vehicle without any disturbances to the
railway/road/canal formation etc., including
bailing/pumping of water wherever necessary without
affecting any
Drilling of 600mm diameter MS casing pipe
20
RMT
Drilling of 350mm diameter MS casing pipe
10
RMT
|Supply of DI (CL) pipes of class K7 or K9 as per IS
8329/2000 with sulphate resistance cement with inner
ing of high alumina cement as per IS:783 with epoxy
coating outside of the spigot portion and poly solution
coating inside the socket portion, lowering into
trenches, laying to proper grade and alignment, cutting
{the pipes true to axis & jointing the pipes & specials
lwith rubber rings including cost of lubricant, testing the
pipe to the required pressure including barricading,
provision of danger lights, arranging for watch & ward
jetc., complete as per specifications at different depths.
250 to 350 mm dia..
DI
20
RMT
200 mm dia. DI
10
RMT
Restoration of the Refilled UGSS Portion of BT RoadS.No Description of work UOM Qty
Providing plain Cement Concrete 1:4:8 mix using 40mm
gauge hard broken granite (HBG) metal for pavement
including cost and conveyance of material to site
including cost and supply and provision of construction
land expansion joints along alignment and cross section
[and fixing in position including labour charges for laying
concrete, watering, consolidation, finishing and hire
[charges for all tools and plant etc complete as per
MoRTH Specification.
35 805.275 | Cum.
Providing Plain cement Concrete 1:2:4 mix using 20mm
Jgauge hard broken granite (HBG) metal for pavement
including cost and conveyance of material to site
including cost and supply and provision of construction
fand expansion joints along alignment and cross section
jand fixing in position including labour charges for laying
lconcrete, watering, consolidation, finishing and hire
Icharges for all tools and plant etc complete as per
IMoRTH Specification,
36 536.85 | Cum.
Providing 8.M. 50mm consolidated thick incl. Tack cost
using 4kg Over WBM Surface/ Using 3 kg Over BT
[Surface/ using 0.42m3 of 26.5mm to 11.20mm graded
metal of IRC Size and 0.10cum of 11.2 to 2.80mm and
10.18 m3 of 2.8mm and below (it should satisfy the
aggregate grading as per graduation in table 500-5) for
'10sq.m with 38kg of bitumen for premising including
cost of bitumen including conveyance of bitumen to
ICMP site and also to work site handling charges at both
lends for the same including a labour for loading
bitumen in bitumen tank and metal to feeder unit
labour for attending to paver site heating the bitumen
land metal to required temperature and mixing the
metal and bitumen to required temperature in the
central hot mix plant 20-30 ton capacity
37
[Conveying the mix by tipper trucks to paver site
[spreading the mix in required temperature for uniform
thickness SOmm with Mechanic paver to the specified
Igrades and cross section and consolidated by power
roller to get the required density including higher
[charges and fuel charges for CMP 20-30 ton Capacity,
paver finisher, tipper trucks, Power Roller, Bitumen
Boiler and all other T&P required and including all other
incidental charges etc. Complete as per specification.
38 1006.595 | Cum.S.No}
Description of work
vom | aty
39
Providing and laying semi dense bituminous concrete
25mm compacted thickness using 0.10 cum of 11.2 mm
IRC HBG metal 0.16 cum of 6.7 mm IRC HBG metal 0.11
[cum of 2.8 mm and below with 24 kg of bitumen per 10
jsam. For premixing including cost and conveyance of all
materials to site and stocking them on road side to
departmental metric gauge for per measurements,
heating the bitumen in bitumen boiler, heating the
aggregates and mixing them with bitumen in mini hot
mix plant, spreading the mix in the required
temperature for uniform thickness of 25 mm to the
specified grade and cross sections and compaction by 8-
10 power roller etc. Including hire charges and fuel
charges for power roller, bitumen boiler, mini hot mix
plant and all other tools and plant employed etc.
[Complete as per clause 511 of MORTH specification.
20131875 | sqm.
Restoration of Foot Path
40
providing Plain Cement concrete 1:4:8 mix using 40mm
gauge hard broken granite (HBG) metal for pavement
including cost and conveyance of materials to site
including cost and supply and provision of construction
land expansion joints along alignment and cross section
jand fixing in position including labour charges for laying
concrete, watering, consolidation, finishing and hire
charges for all tools and plants etc complete as per
IMORTH specification,
160.05 | Cum.
MES SSR 2010 rate item 04026 for channels / drains
PCC 1:4:8 w/40mm
41
Providing Plain Cement Concrete 1:2:4 mix using 20 mm
Jgauge hard broken granite (HBG) metal for pavement
including cost and conveyance of materials to site
including cost and supply and provision of construction
jand expansion joints along alignment and cross section
land fixing in position including labour charges for laying
concrete, watering, consolidation, finishing and hire
Icharges for all tools and plants etc complete as per
|MORTH specification.
149.38 | Cum.
42
Brickwork w/ sub-class B bricks straight or curved on
plan exc. 6m mean radius built in CM 1:6
213.4 | sq.m.
43
Py
Form - work to sides of concrete surfaces (PCC1:
work section)
1387.1 | sq.m.
Rendering with CM 1:6, 15 mm thick
2400.75 _| sq.m.
[Road Restoration of Concrete Road
0S.No
Description of work
UOoM
Qty
45
Dismantling of Existing CC pavement for the section
outside the UG trench limit (This section already
faccounted for in main Estimate) for an average road
width of 2.5m total and total dismantling thickness of
25cm average, up to sub base level including all costs
for removal of material, tolls, plant etc. Complete as per|
standard specifications.
1773.46
Cum.
46
providing Plain Cement concrete 1:4:8 mix using 40mm
gauge hard broken granite (HBG) metal for pavement
including cost and conveyance of materials to site
including cost and supply and provision of construction
fand expansion joints along alignment and cross section
and fixing in position including labour charges for laying
concrete, watering, consolidation, finishing and hire
[charges for all tools and plants etc complete as per
MORTH specification.
1773.46
cum.
47
Providing Plain Cement Concrete 1:2:4 mix using 20 mm
gauge hard broken granite (HBG) metal for pavement
including cost and conveyance of materials to site
including cost and supply and provision of construction
land expansion joints along alignment and cross section
and fixing in position including labour charges for laying
concrete, watering, consolidation, finishing and hire
charges for all tools and plants etc complete as per
MORTH specification.
1166.75
Cum.
Road Restoration along National Highway Stretch
48
Cleaning Jungle including uprooting of rank,
vegetations, grass, bush, shrub, wood trees and
samplings of girth up to 30 cms measured at a height of
up to 20 above ground level and removal of rubbish up
ito a distance of 50m outside the periphery of area
cleared including cost of all machinery, labour, tools,
plant, power, water etc, complete
1876.5
Cum.
49
Forming Embankments including raising (or lowering)
earth, spreading in layers n exc. 30 cm thick, watering
ramming/rolling and finishing to required size, shape,
letc. N exc. 1.5m high from base as per MORT& H
specifications for all kinds of soil etc complete
1876.5
Cum.S.No|
Description of work
uom
Qty
50
[Supplying and laying water bound macadam sub base
(GSB) with broken boulders, interstices filled and
binding material, earth etc including screening, sorting
jand spreading to template and consolidation with light
Power road roller etc complete including cost of all
machinery, tolls, plant, labor, material etc as per
IMORT&H specifications
5942
Sqm.
51
Providing, laying, spreading and compacting stone
laggregate of specified sizes to WBM specifications
including spreading in uniform thickness, hand picking,
rolling with 3 rolled road/ vibratory roller 8-10 tonne in
stages to proper grade and camber, applying and
booming requisite type of screening/binding material to
fill up interstices of coarse aggregate watering and
compacting to the required density. wooden or stee!
rammers and rolling over 3rd and top most layer with
|power roller of minimum 8 tonnes and dressing up, in
lembankment for roads, flood banks, marginal banks
[and guide banks etc lead up to 50 m and lift up to 1.5 m
las per table 400-7 of MORT&H specifications for all
kinds of soil.
Hand broken - Grade-! (90-45mm) - for 100 mm thick
4691.25,
Hand broken - Grade-II (63-45mm) - for 75 mm thick
4691.25,
‘Sqm.
Hand broken - Grade-lIll (53-22.4mm) - for 75 mm thick
4691.25
Sqm.
52
Providing and applying tack coat using hot straight run
bitumen of grade 80/100 including heating the
bitumen, spraying the bitumen with mechanically
loperated spray unit fitted on bitumen boiler, cleaning
jand preparing the existing road surface as per surface
las per MORT&H specifications on WBM new surface @
110 kg/10 sqm.
4691.25
Sqm.
53
Providing 2 cm premix carpet surfacing with 1.8 cum
Jand 0.9 cum of stone chippings of 13.2 mm and 11.2
mm size respectively per 100 sqm and 52 kg and 56 kg
Jof hot bitumen per cum of stone chippings of 13.2 mm
jand 11.2 mm size respectively including consolidation
with road roller of 6-9 tonne capacity etc. complete
(tack coat to be paid separately) with paving asphalt
180/100 heated and then mixed with solvent at the rate
lof 70 gms per kg of asphalt including cost for all items
such as machinery, tools, plant, etc complete as per
IMORT&H specification.
4691.25
sqm.Description of work
Providing and laying seal coat over prepared surface of
road with bitumen heated in bitumen boiler fitted with
the spray set spraying using 98 kg of bitumen of grade
80/100 and binding surface with 0.90 cum of stone
aggregate of 6.7 mm size (passing 11.2 mm sieve and
54 [retained on 2.36 mm sieve) per 100 Sqm. of road
surface including rolling and finishing with power road
roller and including cost for all items such as
machinery, tools, plant, etc complete as per MORT&H
Specification.
4691.25
Sqm.
Planting road surface marking with adequate number of
coats to give uniform finish with ready mixed road
marking paint confirming to IS:164, on bituminous
surface in white/ yellow shade including cleaning the
55 |surface of all dirt, scales, oil, grease and foreign
material etc. New work (two or more coats) including
cost for all items such as machinery, tools, plant, etc
complete as per MORT&H Specification
925'1.
Sqm.