Professional Documents
Culture Documents
Moulded inside and outside corners, plinth blocks and rosettes make
installation hassle-free
MOULDINGS
Mouldings 1 MLD472-12
Crown Fascia
2 MLD612-12
Chair Rail
4
3 3 MLD730-8
Ogee Moulding
4 MLD454-12
Crown Moulding
5
5 MLD237-16
Door & Window Casing
6 MLD214-12
Door & Window Casing
7 MLD735-16
Beaded Flat Trim
1 8 MLD603-8
2 Quarter Round
9 MLD610-8
Chair Rail
6
10 MLD641-16
Cornice Moulding
11 MLD600-8
2 Florentine Fascia
12 MLD215-8
8 Window & Door Casing
7
a look like no other. For installation instructions, please visit the Product
Support section at www.fypon.com.
Mouldings
Use the pages of this section as fuel for your imagination. Within each category, products are arranged by height from smallest to largest
to help you choose the product that best fits your application. The large variety of sizes and styles can be applied to a home or building.
Mouldings can be used individually or combined to create a new and distinctive look.
MLDWM180-8 1 /"
14
2" 1 / "
1 16
8' Remember to Order Adhesive
A urethane-based adhesive must be used on all joint surfaces.
MLDWM180-16 1 1/4" 2" 1 1/16" 16' See page 138 to order *PL Premium® Adhesive.
MLDWM181-16 / "
13 16
2" /"
58
16' KWM180M
DTLB6X4X6 MLD400
MLDWM183-16 1 1/2" 2 1/8" 1 5/16" 16'
MLD330
K6M
MLD205
Each category chart includes a product photo, part numbers and product WCH36X6
dimensions. The accessory matches for each part are listed in the outlined
inset to the far right of each chart. MLD610
PB3X3 MLD611
FLT152 PB3X3
Understanding Part Numbers
Our stock products are coded alphanumerically, starting with letters that signify the product type. The moulding style appears next as
designated by three numbers. Following the dash is the moulding length in feet. Note the examples below.
Inside Corner
The following accessories are available to make moulding installations quick and easy. Inside
and Outside Corners eliminate the hassle of figuring complex miter cuts. Divider blocks and
Rosette
rosettes can be used between moulding lengths to eliminate the need for patching smooth seams.
All moulding accessories are unattached and must be ordered separately. See the Miterless
Divider Block
Accessories on page 41 for more information.
Keystone
Custom Products
If a truly unique design is required, Fypon can create it for you. Please fill out our Custom Quote Request form, which
can be obtained by visiting the Products section of our website or by contacting Customer Service. Your request will then be quoted by our
Custom Product Sales Department.
www.fypon.com Phone 800.446.3040 • Fax 800.446.9373 U.S. and Canada *PL Premium® is owned by Henkel Corporation. 39
Mouldings
Remember to Order Adhesive
A urethane-based adhesive must be used on all joint surfaces. See page 138 to order PL Premium® Adhesive.
Flat trim sizes continued
FLT131-16 /"
12
3" 16' —
FLT170-12 1" 9 1/2" 12' —
FLT178-8 /"
12
14" 8' —
FLT170-16 1" 9 1/2" 16' —
FLT100-12 58
/" 4 3/4" 12' —
FLT172-16 1" 11 1/2" 16' —
FLT181-8 58
/" 24" 8' —
FLT175-12 1" 12" 12' —
FLT101-12 34
/" 1 1/2" 12' —
FLT179-12 1" 16" 12' —
FLT102-8 34
/" 2 1/8" 8' —
FLT180-12 1" 24" 12' —
FLT102-10 34
/" 2 1/8" 10' —
FLT119-17 1" 32 1/4" 16' 11" —
PB3X3
FLT103-12 34
/" 3" 12' PB4X4 FLT184-16 1 1/2" 1 1/2" 16' —
FLT122-16 34
/" 3 1/2" 16' PB4X4X1 FLT194-10 1 1/2" 3 1/2" 10' —
FLT110-16 34
/" 5 1/2" 16' —
FLT183-12 1 1/2" 5 1/2" 12' —
PB5X5
FLT109-12 34
/" 6" 12' PB5X5A FLT163-16 1 1/2" 7 1/2" 16' —
FLT186-16 34
/" 7 1/4" 16' —
FLT182-12 1 1/2" 12 1/4" 12' —
FLT113-8 34
/" 8" 8' — FLT185-12 1 1/2" 16 1/2" 12' —
FLT118-8 34
/" 10" 8' — FLT190-12 2" 4" 12' —
FLT151-12S 34
/" 3 1/2" 12'
Moulding
FLT110-12S 34
/" 5 1/2" 12' Part Number Height Width Match
FLT173-12S 34
/" 11 1/2" 12'
Combine a simple window casing with flat trim to quickly and easily trim
out the interior of a new retrofit window. The flat trim, used as a jamb
extension, will hide any broken plaster that was damaged when removing
the old window.
Fluted Casing
Keystone
Part Number Projection Width Thickness Length Page 23
Casing MLD220-12
6M Profile
1 3/4" 5 1/2" 12' PB220
Other
Accessories
Pages 32-33
MLD220-16 1 3/4" 5 1/2" 16' K6TM
6M Profile KP6TM
6M Arches
MLD205-8 78
/" 3" 8' MLD223-16 2 1/2" 14 1/2" 16' —
PB3X3
PB4X4
MLD205-12 78
/" 3" 12'
Fluted Casing
Window & Door Casing sizes are continued on the next page
MLD225-12 1 /"
12
8 /"
12
12' — MLD240-8 3 /"
14
4" 8"
DTLB6X4X6
DTLB9X11X16
Dentil Moulding
Divider Block
Part Number Projection Height Length Bottom Thickness Tooth & Space Design Repeat Page 41
MLD303-5 /"
58
1 1/4" 5' 3
/16" /"
34
1 1/2" _
MLD304-5 /"
58
1 1/4" 5' 3
/16" 1 1/4" 2 1/2" _
MLD304-8 /"
58
1 1/4" 8' 3
/16" 1 1/4" 2 1/2"
Dentil Fascia
Divider Block
Dentil moulding sizes continued Part Number Projection Height Length Bottom Thickness Tooth & Space Design Repeat Page 41
3 9/16"
Space
MLD350-8 78
/" 3 1/2" 8' 3 3/4" /"
12
2 3/ 16" 3 11/ 16" _
Dentil Block Tooth
1 1/2"
Space
1 1/2"
Space
Dentil Moulding
Continued
Part Number Projection Height Length Bottom Thickness Tooth & Space Design Repeat
MLD355-8 /"
58
2 1/2" 8' 3/8" /"
58
1 3/8" 2 1/8"
Dentil Tooth
/"
34
Space
1 1/8"
Space
4 1/4"
Space
2"
Space
2 3/8"
Space
14 7/16"
Space
Divider Block
Dentil moulding sizes continued Part Number Projection Height Length Bottom Thickness Tooth & Space Design Repeat Page 41
Tooth
/"
38
Space
E-Vent Match
MLD404-16 2 1/2" 3 7/8" 16' /"
34
/"
34
1 1/2" Page 62
EV404
Tooth
/"
34
Space
1 1/16"
Space
Dentil Moulding
Continued
Divider Block
Page 41
Part Number Projection Height Length Bottom Thickness Tooth & Space Design Repeat
2 7/8"
Space
4"
Space
/ "
13 16
Space
/"
78
Space
12"
Space
Dentil moulding sizes continued Part Number Projection Height Length Bottom Thickness Tooth & Space Design Repeat
3 7/8"
Space
2 5/8"
Space
Crown Moulding
Bottom
Part Number Projection Width Length Thickness
Bottom
Part Number Projection Width Length Thickness
MLD450-16 11 7/16" 9 5/8" 16' 1 9/16" MLD455-12 1 1/4" 1 13/32" 12' / "
5 16
Bed Moulding
Crown Moulding
Bottom
Part Number Projection Height Length Thickness
Continued
MLD480-12 7 7/8" 8 7/8" 12' /"
38
Massive Crown
Ships in 2 pieces
Bottom
Part Number Projection Height Length Thickness
MLD461-8 9 13/16" 19" 8' 1" MLD491-12 6 1/4" 5 3/8" 12' /"
14
Acanthus Leaf
4"
Design
1 1/2" 1" Repeat
Tooth Space
Crown Leaf
Divider Block 4"
Accessory Design
Page 41 Repeat
MDB493
Leaf Crown
7 3/4"
Design
Repeat
3
1
4
MLD471-12 7 1/8" 4 5/8" 12' /"
58
Massive Crown
2 2
Bottom
Mouldings Part Number Projection Height Length Thickness
Bottom
Part Number Projection Height Length Thickness
MLD508-12 3 9/16" 8 3/8" 12' 1 5/32" MLD523-16 2" 5 1/4" 16' /"
12
Matches
MLD531 Page 52
Bottom
Part Number Projection Height Length Thickness
Matches
MLD530 Page 51
MLD532-16 2" 13 1/2" 16' 1 1/4" MLD548-16 3 3/16" 7 1/2" 16' 1 1/8"
Trigliph
MLD533-12 5 1/2" 17" 12' 2 1/2" MLD552-12 2 1/16" 3 1/2" 12' /"
38
MLD536-12 8 1/8" 15 1/2" 12' 1" MLD556-16 10" 15" 16' 2 1/2"
MLD538-16 1 5/8" 8 11/16" 16' 1 9/32" MLD560-8 5 23/32" 9 5/32" 8' 1 3/8"
Egg and Dart
5 7/16"
Design
Repeat
Bottom Bottom
Moulding sizes continued Part Number Projection Height Length Thickness Part Number Projection Height Length Thickness
MLD569-12 5 13/16" 7 17/32" 12' 1 3/32" MLD586-16 7" 16 1/2" 16' 1"
Classic
Combination
Crown
E-Vent Match
Page 62
EV570
E-Vent Match
Page 63
EV580
Bottom
Part Number Projection Height Length Thickness
MLD600-8 /"
34
4 5/16" 8' /"
14
MLD609-12 78
/" 2 1/16" 12' /"
38
MLD600-10 /"
34
4 5/16" 10' /"
14
MLD602-8 / "
13 16
/ "
13 16
8' /"
58
MLD611-12 1 1/8" 2 1/4" 12' /"
38
MLD603-8 12
/" /"
12
8' /"
12 MLD612-12 /"
34
1 3/8" 12' /"
18
MLD605-12 1 3/4" 3 1/2" 12' 1 3/4" MLD614-16 1 5/8" 5 9/16" 16' /"
34
Bottom Bottom
Moulding sizes continued Part Number Projection Height Length Thickness Part Number Projection Height Length Thickness
MLD628-8 /"
34
/"
34
8' /"
14 MLD641-16 3 3/4" 4 3/8" 16" _
Cove
MLD631-16 78
/" 3" 16' /"
34 MLD644-16 3" 9 3/4" 16' 1"
Chair Rail
MLD633-8 /"
34
/"
34
8' / "
3 16 MLD647-16 1 3/4" 8" 16' 1 3/4"
Ogee Deco
Plinth
Block
Part Number Projection Height Length Page 35
Woodgrain/Stainable
MLD706-16 /"
58
5 1/4" 16' PB6X6
1
_ 2
MLD708-12 1 1/2" 12" 12'
Bevel
1 MLD610-8 3 PIL5X108
MLD734-12 14 1/4" 14 1/4" 12' _ Chair Rail Moulding Adjustable Fluted Pilaster
2 85012 4 MLD735-16
PVC Flat Trim Beaded Moulding
MLD440 41.5° 20° NO YES Place moulding face side down. "YES" means to rock the moulding
toward the fence pivoting on the
design (as shown on MLD422).
MLD452 29° 36° NO YES Place bottom edge of the moulding "NO" means let the moulding lay flat
toward the fence. on the table.
MLD453 29.5° 36° NO YES
www.fypon.com Phone 800.446.3040 • Fax 800.446.9373 U.S. and Canada *Bosch® is owned by Robert Bosch GmbH. 57