Professional Documents
Culture Documents
Run the following command to support cluster-wide configuration of the SCMA policy.
You can run the command as shown in the table in this section to enable high-strength password policies
(minlen=15, difok=8, remember=24).
Note:
Difok: is the minimum number of characters that must be different from the old password.
Remember: is the number of passwords that the system remembers so that you cannot use those passwords again.
Dear customer:
+These commands were run in a test environment as an example, please refer to the Security Guide to follow up the
correct guidance according to your environment:
https://portal.nutanix.com/page/documents/details?targetId=Nutanix-Security-Guide-v5_19:sec-ahv-configuration-
c.html