Professional Documents
Culture Documents
Contents
GB.2
Precautions during use
It is essential to follow the precautions below when using the system, both in the interest of safety and to prevent material damage.
You must always comply with the laws of the country in which you are travelling.
The prior acceptance of the General Conditions of Sale is mandatory before using the system.
The description of the models given in this manual is based on the specifications at the time of writing. This manual covers all
existing functions for the models described. Whether or not they are fitted depends on the equipment model, options
selected and the country where they are sold. This manual may also contain information about functions to be intro-
duced later in the model year. The screens shown in the user manual are not contractual. Depending on the make and
model of your telephone, some functions may be partially or completely incompatible with your vehicle’s multimedia system.
For more details, please consult an Authorised Dealer.
GB.3
general description
G Pop-up menu.
A B C D E H Current vehicle position. P Q R
I Favourites. Drive to...
FM1 Preset 3
J Access to the “Android Auto™“menu
of the connected telephone.
N K Driving Eco²/”Energy” for electric ve-
Home Saved loca-
tions
Locations
M hicles.
Driving Eco²
F L Main menu. Recent desti-
nations
Charging
stations
Point of in-
terest
GB.4
introduction to the controls (1/9)
Screen controls
1
2 6
3 7 8
4 4 4
5 5 5
GB.5
introduction to the controls (2/9)
Function
From a list: move upwards.
1
From the map: change scale (ZOOM mode).
2 Confirmation button
Press: on/off
5
Rotate: adjust source volume while listening.
GB.6
introduction to the controls (3/9)
Multimedia screen
9 10 11 11 12 13
18 17 16 15 14
9 19 11 11 20 13
10 17 16 15 18
GB.7
introduction to the controls (4/9)
Function
Short press: on/off
9
Rotate: adjust the volume of the source currently in use.
10 Display the welcome screen.
11 Change a CD track or playlist.
12 Access the telephone menu.
13 Eject a CD.
14 Open the source screen while listening (radio, CD, etc.)
15 Open the pop-up menu.
Switching:
– moving around the card;
– up/down: move to different areas of the screen (upper bar, central zone, lower bar);
– left/right: move to different parts of a menu.
16 Rotate:
– move around the various elements of a zone;
– modify the scale (ZOOM mode).
Press:
– confirm.
GB.8
introduction to the controls (5/9)
Radio front panel
21 22 23 24 25 26 27
28 24 28
24 22 23 24 26
21 28 28 27
GB.9
introduction to the controls (6/9)
Function
22 On/off
26 Eject a CD.
GB.10
introduction to the controls (7/9)
Steering column control Function
34 33
33 Change radio mode (preset/list/frequency) or confirm an action.
38 Short press:
38 – answer/end a call (phone mode);
39 – mute on/off.
GB.11
introduction to the controls (8/9)
Control on the steering wheel
with voice command Rotate: search for radio stations/change track or audio file.
41
Press: change radio mode (preset/list/frequency).
35 36 37 38
42 41 39
GB.12
introduction to the controls (9/9)
Central control Function
43 Go back to the previous menu.
43 44 45 46
44 Display the welcome screen.
Switching:
– move around the map or in a menu/page;
– up/down: move around the various areas (top bar, central area,
bottom bar) of a menu.
Rotate:
47
– move around the various elements of a zone;
52 51 50 49 48 47 – move around a list;
– modify the scale (ZOOM mode).
Press:
– confirm.
48 Open the screen for the audio source currently playing (radio, CD etc.).
50 Access favourites
GB.13
SD card: use, initialisation
SD card
A SD card is supplied with the naviga- Removing the SD
tion system. Amongst other things, this card
includes maps for your country or set of
countries. On the main menu, press “System”,
then “Remove SD card” to eject the SD
Before using the SD card, check that it
is not locked. 1 card safely.
To remove the SD card from the SD 1
Map updates are released regularly.
port, press the card, then release it.
They are only available for download
The card will jut out of the slot by a few
by inserting the SD card of your navi-
millimetres. Pull the card to remove it
gation system into your computer's SD
completely.
port, online at the “R-LINK Store”.
GB.14
operating principles (1/4)
2 3
1 4 1 4
1
Confirming/cancelling a selection
Always confirm a change of settings by
pressing the “Done” button.
GB.15
operating principles (2/4)
Confirming/cancelling a selection
Press the central button 6 to confirm a
change.
5 Press the 7 button to cancel a choice
1 4 and return to the previous menu.
Press the 8 button to go back to the
welcome screen.
8 7 6
Multimedia screen
Navigating a menu
Use the rotating control 5 to move from
menu to menu. Confirm by pressing the
central 6 button to enter the menu.
GB.16
operating principles (3/4)
9 10 – press the joystick 11 to open the se-
lected element;
– in the tabs menus, move the joy-
stick 11 left or right to switch from Favourites - Navigation
Confirming/cancelling a selection
Press the joystick 11 to confirm a Add Favourite
GB.17
operating principles (4/4)
Introduction to the main
menu Vehicle
To access the main menu, press “Menu”
from the welcome screen.
FM1 Preset This function includes management
The system is made up of six major of equipment such as the revers-
sections, all of which can be accessed ing camera, on-board computer and
from the main menu: Driving eco², and some items specific
Flow
to electric vehicles.
Menu
Navigation
Services
This function includes all the satellite
navigation features, road maps, traffic
Introduction to the welcome information, services LIVE and warning This function includes the R-Link Store
screen areas. and the applications.
The welcome screen is the default
screen for your multimedia system. It is
Multimedia
made up of a certain number of short-
cuts to other functions, such as naviga- System
tion and radio. This function enables management of
the radio, and audio and video play-
For a description of the welcome back. This function is for adjusting various
screen, please refer to the “General de- settings on the multimedia system, e.g.
scription” section. display, language, date and time.
Phone
Note: You can change the configura-
tion of the welcome screen. Please see This function is used to pair the system
the information on “Welcome screen” in with a mobile phone and to use the
the “System settings” section. hands-free mode.
GB.18
On, off (1/2)
Switching off
With the ignition off, the system is deac-
tivated automatically when the driver’s
door is opened.
Safety Data sharing consent
Warning: always drive safely and obey local traffic regula- With the ignition on, press the multime-
dia system on/off button .
tions. This vehicle might run applications that require collecting and transmitting
data related to your journey, such as vehicle location, to the service or
information providers..
Data sharing authorised
Do you agree to allow services to share data outside this vehicle? \n Press
You have selected to share information outside of this vehicle. You can Help to view more detailed information.
change this setting any time in the Services menu.
1 2 3 4
GB.19
On, off (2/2)
Resetting the system
To reset all the system settings and/or
delete all personal data, select “System”
from main menu, then “Restore factory
settings” and follow the on-screen in-
structions.
Note: Resetting the system means de-
leting all the applications.
Exterior temperature/clock
This screen is displayed when the driv-
er’s door is opened, before the ignition
is switched on.
It is displayed when the system is off:
with the ignition on, press the on/off
button on your multimedia system. The
system then stops the guidance and
displays the clock and temperature.
GB.20
Add, manage Favourites
Add a telephone favourite 4
Select an empty slot A or “+”, then "Add
Favourite”. Choose the favourite from
Favourites - Navigation the list to add a contact. For more in-
formation, consult the “Managing the
A A A
FM1 Preset
phonebook” section.
Note: A contact added as a favourite
remains visible to any user of the vehi-
cle, whichever phone is connected.
Add Favourite
A A Remove a Favourite
Driving Eco²
GB.21
using voice recognition (1/6)
Voice recognition system
Your multimedia system has a voice
recognition system which allows voice
control of some functions and appli-
cations of the multimedia system and
your phone. This enables you to use
your multimedia system or your phone
while keeping your hands on the steer- 1
ing wheel.
2
Activation of the multimedia From the main voice control menu, you
system's voice recognition can use voice control to control three
functions of your multimedia system:
You can use voice control to call a con-
tact in your phonebook, enter a desti- – navigation;
nation, change radio station etc without – telephone;
touching the screen. Briefly press the – installed applications.
voice recognition button 1 on the steer- Note: the position of the voice recog-
ing wheel or 2 on the steering column nition button varies (control on steering
control of your vehicle. The multimedia wheel or column). Please refer to the
screen will display the main voice con- vehicle user manual for further informa-
trol menu. tion.
GB.22
using voice recognition (2/6)
Colour markers Central icon
3 The colour markers are used to opti- Depending on the system status, differ-
mise voice recognition: ent central icons can be displayed:
Voice control main menu
– green marker: optimal voice recogni- – “Micro” icon: the system is ready to
tion; receive your voice commands;
Destination Phone Application
– orange marker: good voice recogni- – “Loading” icon: the system is loading
tion; data;
– red marker: average voice recogni- – “Loudspeaker” icon: the system is
tion. giving you information via its voice
synthesizer.
Exit Help
GB.23
using voice recognition (3/6)
Note: you can also enter an address or
recent destination from the voice control
main menu. To do this, press the voice
Voice control main menu New address control button, then say “Locations” or
“Recent destinations”, and give an ad-
dress or select your destination.
Destination Phone Application
For example: 7 Oxford Street, London
GB.24
using voice recognition (4/6)
– the system will show the number
given, say “Call” to call the number
or “Delete” to give another number.
Voice control main menu Dial a number
Note: you can also call a stored contact
or a number from the main voice con-
trol menu. To do this, press the voice
Destination Phone Application
0031 123 456 789 100 control button then say the name of the
Call
contact or the number you want to call.
Delete Note: You can say the contact's name
or their number directly from the main
Exit Help Back Start again Help
page. To cut off the synthetic voice
during playback of the contact's name
or phone number, press the mute button
on the steering column control.
GB.25
using voice recognition (5/6)
Launching a multimedia Note: you can also run the R-Link Store
system application using application from the voice control main
menu. To do this, press the voice con-
voice recognition trol button and say “Run the R-Link
You can launch an multimedia system Store application”.
app using the voice control integrated
into your multimedia system. To do this:
– press the voice control button to dis-
play the main voice control menu;
– when the system beeps, say
“Application”;
– say the application name you wish to
launch to begin using it immediately.
GB.26
using voice recognition (6/6)
Activating the phone's To deactivate your phone's voice rec-
voice recognition with the 4 ognition system with the multimedia
system, press and hold your vehicle's
multimedia system voice recognition button.
To use your phone's voice recognition
From the main voice control menu, you
system with your multimedia system, Bastien's phone
can use voice control to control some
you should:
functions and applications of your
– connect your telephone to the multi- phone.
media system (refer to the section on
Voice recognition is disabled:
“Connecting, disconnecting a tele-
phone”); – when reversing your vehicle;
Add device – during a call.
– ensure that your phone has a voice
recognition function compatible with Note: the voice recognition session is
your multimedia system. automatically deactivated after several
seconds of inactivity.
Note: If the voice recognition from your
phone is compatible with the multime- Note: if you wish to use your phone's
dia system, the 4 pictogram appears voice recognition with the multimedia
from the “Manage devices” menu. For system, make sure that you are located
more information, please refer to the in a network coverage area.
sections on “Connecting, disconnecting To activate your phone's voice recogni-
a telephone” and/or “Pairing, unpairing tion system with the multimedia system,
a telephone”. press and hold your vehicle's voice rec-
ognition button. The multimedia screen
displays your phone's main voice con-
trol menu.
To restart your phone's voice recogni-
tion system, briefly press your vehicle's When using your phone's voice rec-
voice recognition button. ognition with the multimedia system,
the transfer of cellular data required
for its operation can generate ad-
ditional costs not included in your
phone service contract.
GB.27
entering a destination (1/5)
– select a destination from the
“Navigation” “Recent destinations”; “Saved locations”
menu – select a destination by “Charging
station” (electric vehicle); The “Saved locations” section con-
From the main menu, press – select an address from a “Point of tains the favourite stored destina-
“Navigation”. interest” (POI); tions such as your place of work,
– select a “Point on map”; etc.
From the “Navigation” menu, press the
– select a “Latitude” and a
button “Drive to...” to enter your desti- – Select the “Navigation” section
“Longitude”.
nation. from the “Drive to...” menu;
– Choose “Saved locations” and
confirm;
– Select the required destination
address in the list of stored ad-
“Drive to...” menu dresses to start guidance.
You can manage your saved ad-
This menu offers several ways to dresses within the “Settings” menu;
enter a destination: select “Manage saved locations”.
– enter an address from the Note: the “Saved locations” icon
“Locations” section using one of “Home” is for accessing stored addresses
the following methods: and the “+” button is for adding ad-
– enter a full address (town/city, This menu can be used to start navi- dresses as required.
street and number); gating your way home.
– search by postcode; To store the address of your home
– Select a City Centre, location, use “Settings” menu, then
– select a crossing or junction; “Change home location”.
– select a “Home”;
– select an address from the “Saved
locations”;
For safety reasons, carry
out these operations when
the vehicle is stationary.
GB.28
entering a destination (2/5)
GB.29
entering a destination (3/5)
Search by POI category
“Charging station” “Point of interest” (POI)
– Select the “Drive to...” section
from the “Navigation” menu, then
This menu enables you to find a A point of interest (POI) is a service, choose “Point of interest”;
charging station for your electric ve- establishment or even a tourist area
– Select the search area: “Near
hicle and to plan your route to this close to a location (start point, desti-
my location”, “In city” or “Near
location. nation city, en route, etc.).
Home”;
Note: You can manage your per- POIs are classed in different catego-
– select your desired category type;
sonal stations via the “EV set- ries, e.g. restaurants, museums, car
tings” menu. For further informa- parks, etc. – select the desired POI from the
tion, please refer to the section on list suggested, then press the
There are several options to find a
‘’Navigation settings”. “Select” button on the multimedia
point of interest:
system screen to begin naviga-
Note: Personal recharging stations – category; tion to this location.
are stored in the navigation system,
whereas the generic list of recharg- – the name of the desired POI.
Search by POI name
ing stations is stored on the SD card. Select the “Drive to...” section from
Enter the name of a POI you want to
Only the list on the map SD can be the Navigation menu, then “Point of
find. The system will start the search
updated and only the personal re- interest” and confirm.
automatically.
charging stations can be managed
from the navigation system.
GB.30
entering a destination (4/5)
Confirming the destination Note: if you do not confirm, this page
“Point on map” will close after ten seconds and guid-
Once the destination information has ance will start automatically.
been entered, the system displays a
This function allows you to define a route summary for confirmation. Once Note: depending on the vehicle charge
destination from the map. From the you have confirmed the route, the level, if you can reach your destination,
“Navigation” menu, select “Drive system will calculate the itinerary. By guidance is launched – if the charge
to...”, then “Point on map”. default, the calculation is done by se- level is too low, the system offers to
lecting the fastest route. search for a recharging terminal on the
Move around the map to position way.
the cursor on your destination, then Note: The calculation criterion can be
confirm: the system calculates the changed in the settings. Note: “ IQ Routes™” is a function which
route. optimises the journey time using statis-
At the end of the calculation, the system tical data and calculates routes based
displays the navigation summary and on the average traffic levels on that day
suggests two options: and time. To activate or deactivate this
– “+” enables you to view the route de- function, refer to the “Navigation set-
tails in various forms. For more in- tings” section.
“Latitude Longitude” formation, refer to the information
on “Route details” in the “Guidance” Latest map guarantee
This function allows you to define a section, change the route and save After delivery of your new vehicle you
destination using latitude and longi- the route. have about 60 days in which to update
tude values. – “Done” activates guidance. the map free of charge.
Once this time has elapsed, you will
need to pay for updates.
For more information, please see an
Authorised Dealer.
GB.31
entering a destination (5/5)
4 5 Note: the source of the traffic informa-
tion received is automatically selected
by the multimedia system (LIVE if you
Drive to... have taken out a subscription).
LIVE Specific features for electric
Magny-les-hameaux vehicles
0:15 h The map shows the part of the journey
8.5 km
that can be completed in green, and the
The quickest way
IQ Routes part of the journey that cannot be com-
1 Janvier, 0:32
pleted without recharging in red.
If your vehicle charge level is high
Done
GB.32
Volume and VOICE
Recorded human voices
Volume sensitive to
Sound levels Recorded human voices are voices
speed recorded by an actor (male or female).
Changing the volume This function enables the multime- Note: human voices only give you
dia system to automatically adjust the simplified guidance instructions.
To change the audio volume, use the
multimedia system volume control volume according to the vehicle speed.
during a voice instruction or from the You can adjust the sensitivity using the
“System” menu, “Sound settings”, then “+” and “-” buttons.
“Sound levels” and adjust the following
audio volumes:
– main volume;
– hands-free;
– telephone ringtone; Voice
Playback
– navigation;
Your system allows you to select either
– synthetic voice; Playback is generated by your naviga- a synthesised or a recorded human
– Park Assist; tion system. It gives verbal instructions voice.
while you are driving. It can give road
– events. directions (e.g. turn right) and traffic This voice is used to give the voice in-
Press “Done” to save the audio vol- sign information. structions.
umes. Note: Voice recognition only operates To change the voice used on your navi-
with playback. gation system, go to the main menu
and select “Navigation”, “Settings”,
then “Voice”.
Select a voice from the list.
GB.33
reading a map
D Outside air quality.
A B C D E F G E Telephone information. M N
F Outside temperature (Weather).
G Current time.
H Pop-up menu.
I Distance to and indication of next
turning / Adjustment of guidance in-
struction volume.
J Audio system information.
K Current vehicle position.
L Back to previous page.
M Traffic information bar: displays inci-
dents on the route, traffic info recep-
tion indicator, access to traffic map.
N Journey information such as arrival
L K J I H time, total distance remaining and
Q P O
Map key whether you will reach your destina- Map colours
tion (chequered flag or chequered You can change the colours on the
A Sign giving the speed limit (the speed with lightning symbol on red back-
given depends on the unit chosen). map: from the main menu select
ground)/Journey summary “Navigation”, “Settings” then “Change
Please refer to the “System settings” O Compass/ 2D/3D mode.
section for more information on the map colours”
choice of units. Note: Access to the full navigation page
Note: the sign turns red and flashes is only possible from the “Navigation” Map icons
if you drive faster than the speed limit tab in the main menu. The navigation system uses Q symbols
B Zoom, touch the magnifying glass to to display points of interest (POI).
display the zoom in and out buttons.
C Name of the next main road or road
sign information, if applicable. Recharging stations
(electric vehicle)
The navigation system uses the P
symbol to display recharging stations.
GB.34
Guidance (1/4)
Guidance Voice
During guidance, before each turning,
the system will give voice instructions.
To deactivate or reactivate voice guid-
ance, please refer to the “Navigation
settings” section.
GB.35
Guidance (2/4)
Route details
This function allows you to view your “Display instructions” “Route summary”
route before guidance begins. Press
the “+” button, then "Route details” after This function makes it possible to view This function is used to return to the
entering a destination. the route plan. previous screen. The details of the
The following choices will be available: journey time, the miles and the type of
Several details of the route will appear:
– “Display instructions”; journey (“IQ Routes™" activated/deac-
– direction-change arrow;
– “Display route map”; tivated) are displayed.
– road types;
– “Display route demo”; – road names; Note: to directly access this page from
– “Route summary”; – miles/kilometres before a fork in the the navigation map, press the informa-
– “Display destination”; road. tion block set for your trip.
– “Display traffic on route”.
GB.36
Guidance (3/4)
Select this menu to make the system Select this menu to change your route
To modify your route, from the stop the current guidance. so that it passes by a particular loca-
“Navigation” menu, select “Change tion, to pick someone up on the way, for
route” then one of the options pro- To start guidance again, select “Drive
to...”, then “Recent destinations”. example. You choose the location you
posed. want to pass in the same way as you
The system calculates the route taking choose a destination.
the detour into account. You have the same set of options:
Note: you can add several waypoints “Locations”, “Saved locations”, “Point
“Cancel route” of interest” and “Point on map”.
to your route.
Your system will calculate a new route
Select this menu to make the system
to your destination that passes the lo-
stop the current guidance.
cation you chose.
To start guidance again, select “Drive
to...”, then “Recent destinations”.
Precautions regarding
navigation
Use of the navigation
system does not in any way
replace the responsibility or vigi-
lance of the driver when driving the
vehicle.
GB.37
Guidance (4/4)
Select this menu if you see a roadblock Select this menu to avoid a part of the
or a line of traffic ahead which was not route. Use this option if you see that
indicated by the “Traffic info” service. your route includes a road or a junction
You then have to choose how much of that you wish to avoid. Then choose the
the route ahead you want to avoid. road that you wish to avoid from the list
Choose among these different op- of roads on your route.
tions: “100 metres”, “500 metres”,
“2,000 metres”, “5,000 metres”.
Your system will recalculate your route
avoiding the section of the route for the
distance you selected.
“Minimise delays”
GB.38
Preparing a route
To plan a route:
Routes – from the main menu, select
“Navigation”, then “Itineraries”;
– select a point of departure, just as
You can use the navigation system to you would for a destination;
plan a journey in advance.
– select one or more points en route;
To do this, select at least three points,
including the starting point, one or more – select an arrival point;
points en route and your destination. – With the route entered, save it, then
For example, to find out how long a start the journey by pressing “+”,
journey is going to take before you then "Go”. The system plans the
start, or to check the route of a journey route and allows you to view the de-
you are planning. tails.
GB.39
Traffic information (1/3)
“Traffic Information Service” “Traffic settings”
“Traffic Information options This menu allows you to set the desired
Service” default calculation method.
To access the “Traffic Information
Service” options, from the main menu “Display traffic on route”
Traffic information is a service available press “Services”, “Navigation services”, This menu allows you to see an over-
on your multimedia system which en- then “TomTom Traffic". view of all traffic incidents on your
ables you to receive up-to-date traffic route. Press the icon for an incident to
information from the best local sources. “Minimise delays” get more detailed information.
The “Traffic” service uses TMC informa-
tion transmitted over FM wavebands. Select this option to alter your journey
“TomTom Traffic” uses LIVE serv- based on the latest traffic information. “TomTom Traffic” service
ices information. These services show “Read traffic information” This service is accessible free of charge
events in the form of dots on the map. This menu enables you to activate the during a trial period. You can extend
It covers the main roads and is updated audio reading of traffic information. your subscription at a later stage. The
regularly. “TomTom Traffic” service offers more
Note: the menu title can be “Traffic” or “View map” frequent updates (approximately every
“TomTom Traffic". This menu enables you to explore the three minutes), covering main and sec-
map and keep up-to-date with the traf- ondary roads.
fic situation in your area. To access the
map, from the main menu select “Traffic
Information Service”, then “View map”.
The map displays the last searched lo-
cation. Press the icon for an incident to
get more detailed information.
Precautions regarding
navigation
Use of the navigation
system does not in any way
replace the responsibility or vigi-
lance of the driver when driving the
vehicle.
GB.40
Traffic information (2/3)
A Traffic display “Traffic preferences”
B The navigation system indicates traffic To access this menu, from the “Traffic
incidents: Information Services” menu, press
– by displaying symbols on the map “Traffic Settings”.
C (list of icons at the end of the sec- You can automatically minimise delays
tion); after every traffic update.
– with voice messages if the route is To select your preference, tick the box
recalculated. to the right of your choice using the
D Depending on the operating status of central confirmation button.
the “Traffic Information Service”, the fol- Once you have made your choice,
lowing icons are displayed on the traffic select “Done”.
sidebar:
E
A Heavy delays on the route.
F B Unknown or indeterminate situation.
Traffic bar C Slowdown.
D Traffic jam.
The traffic bar is available for the “Traffic E Stationary traffic or road closed.
Information Services”. F Distance before next incident.
The side traffic bar displayed in guid-
ance mode, shows the latest traffic in-
formation for your route.
Precautions regarding
navigation
Use of the navigation
system does not in any way
replace the responsibility or vigi-
lance of the driver when driving the
vehicle.
GB.41
Traffic information (3/3)
One or more
closed roads Strong wind, storm
Road works
GB.42
View map
Pop-up menu “+” – a recharging station search;
– a point of interest;
Press “+” to access the following – your position;
menus: – latitude and longitude.
– “Use this location to...”;
– “Find”; “Edit information on the map”
– “Edit information on the map”; This menu enables you to activate/de-
– “Add to saved locations”. activate map settings such as:
– traffic;
“Use this location to...” – names;
This menu enables the selected posi- – points of interest;
tion to be used to: – charging stations for your electric ve-
– centre the map on the vehicle’s lo- hicle;
cation; – the satellite image map background;
– navigate to a point on the map; – GPS coordinates GPS.
– search for a point on the map;
– add a point on the map to the favour- “Add to saved locations”
To access the map explorer, from the ites;
main menu, press “Navigation” then This menu enables you to add the posi-
– add a point on the map to the POI; tion selected on the map to the saved
select “View map”. To move around the – correct the position of your vehicle.
map, use the multimedia screen or the addresses.
central control on equipped vehicles. “Find” Give your Favourite a name that is easy
This menu allows you to centre the map to remember. You navigation system
on: will always suggest a name - usually a
– your home; favourite address. To enter a name just
– a saved address; start typing on the multimedia screen.
– an address;
– a recent destination;
GB.43
navigation services (1/2)
Your system includes navigation serv-
ices. You can add to these services by
Accessing the navigation
subscribing to the paid TomTom LIVE services “Speed Cameras”
services. To access the “Navigation services”:
– Navigation services include traffic in- – from the main menu, press This service allows you to display the
formation and fixed speed camera “Navigation”; location of mobile speed cameras in
locations (depending on local regu- real time, accident black spots and
lation). – select “Navigation services”.
fixed speed cameras.
– LIVE services (paid, by subscrip-
The latest updates for speed cameras
tion) include traffic information, lo-
are installed automatically if a LIVE
cation and updates on fixed/mobile
subscription is valid.
speed cameras as well as weather
updates. “Speed Cameras” shows you mobile
speed camera alerts as well as fixed
Note: the “TomTom Traffic” service is
speed camera alerts. Information is
called "Traffic” if the LIVE service sub-
obtained in real time using information
scription is not activated.
“TomTom Traffic” from other users.
A trial period for LIVE services is of-
fered. At the end of the trial period, you You can deactivate this function by
can extend your subscription to these Please refer to the “Traffic Information” going to the “Speed Cameras” menu
services LIVE online at www.myrenault. section. for LIVE services.
com. Note: for mobile speed cameras, infor-
mation is provided when a member of
the community sends the information to
the database.
Note: depending on local restrictions,
speed cameras may not be displayed.
GB.44
navigation services (2/2)
This service lets you see the expiry This service provides access to five-
date of the subscribed services. day weather forecasts for the location
Subscription to services can be re- of your choice.
newed via the R-LINK Store or at www.
myrenault.com, by selecting the de-
sired service(s).
You must enter a valid e-mail address
for this service. An e-mail detailing the “Connected
subscription methods for the chosen Services Z.E.”
services will be sent to this address.
For further information, please refer to Connected Services Z.E. are reserved
the section on “Downloading and in- for electric vehicles. Refer to the sec-
stalling applications”. tion on “Connected Services Z.E.” for
Note: to find out more about the avai- more information.
lability of LIVE services in your country,
please see an Authorised Dealer.
GB.45
Connected Services Z.E. (1/2)
From your vehicle
“Connected Your R-LINK multimedia system is com-
Services Z.E.” patible with your telephone for listening
to music, monitoring traffic information
in real time, using your apps, display-
Reserved for electric vehicles, these ing your contacts and many other serv-
services allow you to locate a recharg- ices...
ing terminal, view its availability and
Note: some apps are not available on
the specifications of the recharging sta-
some vehicle models. For further infor-
tions.
mation, please contact an Authorised
They include on-board vehicle serv- Dealer of brand.
ices and other services accessible from
outside the vehicle (mobile phone and
Internet).
For further information, please contact
an Authorised Dealer of brand.
“Z.E. Trip”
GB.46
Connected Services Z.E. (2/2)
Note: Charge programming is only
available on ZOE fitted with the R-LINK
“MY Renault” multimedia system.
Air pre-conditioning management is
From your mobile app you can: only available on KANGOO Z.E. fitted
with the R-LINK multimedia system.
– check the status of your battery;
For further information, please con-
– programme charging; tact an approved dealer or view the
– start and programme the air precon- Renault Easy Connect offer at https://
ditioning; easyconnect.renault.com.
– find available recharging terminals
nearby;
– plan a route, identifying the recharg-
ing terminals along your route;
– and many other services...
Note: for more information on compat-
ible telephones, contact an authorised
dealer or visit https://easyconnect.
renault.com.
GB.47
Recharge Station (1/2)
Saving new recharging
“Charging station” “Near Home” stations
from the navigation When you recharge your vehicle at a
system This option provides a list of recharg- new recharging terminal, it will be auto-
ing stations close to your home. matically saved in the system.
From the “Navigation” menu, select You can also create and manage
“Drive to...”, then “Charging stations”. your own recharging stations in the
This menu can be used to identify a “Settings” menu by selecting “EV set-
recharging terminal and its availabil- tings”. Please refer to the “Navigation
ity and to view the specifications of re- “Along route” settings” section.
charging stations.
This option shows a list of recharg-
ing stations that you can use during
your trip.
“Near destination”
“Near my location”
This option enables you to find the This option gives a list of recharging
recharging stations closest to your stations near your destination.
current position.
GB.48
Recharge Station (2/2)
– white dot: no information avail-
able;
1 2 3
“Z.E. Trip” – key: terminal requires a Z.E. Pass
Z.E. Trip subscription;
– recharge speed: standard, fast,
From the “Services” menu, select “Z.E. CC Vélisy-Villacoublay 1.6 km
extra-fast.
Trip”. Rue Fernand RENAULT
Ykeia, Parking Kitchen 1.6 km – name and address of the station 2;
This app is reserved for electric vehi-
12 Grand place
cles and allows you to consult: – distance remaining 3 to the station.
Car-park 1.7 km
– the charging points around your po- 3 Rue du petit Clamart Use the button (+) 4 to:
sition or around your destination; A destination Rafraîchir – add the terminal(s) to your favour-
– the number of charging points per ites;
station; 5 4 – configure your search;
– the availability status of the terminals – display the terminal(s) on a map;
(free/occupied); At the first connection, select the cables
fitted to your vehicle. – obtain help for the app.
– the sockets or connections available;
Use the (+) button to display the various From the “At destination” 5 button, you
– access times; charging sockets to help your selection. can view a list of charging stations for a
– the type of access to the charge future destination, detailed information
Z.E. Trip finds the closest stations that for each station (compatibility with your
(free/by subscription); match your charging socket. vehicle, run navigation to the station,
and many other services... Various types of information is dis- the connection types, recharging speed
played: and opening times).
– terminal availability 1;
– green dot: at least one terminal
available;
– red dot: all the terminals are oc-
cupied;
GB.49
Range
The range distance is only available for Range view Low battery warning
electric vehicles.
– In guidance mode, from the route When the charge level reaches the
summary screen: you can see the minimum alert level on the instrument
Attainability of the route portions (zones) that are at- panel, the system automatically pro-
destination tainable (in green) and non-attaina- poses a list of recharging stations near
ble (in red); your current location.
The classic map display indicates
whether the battery level of your elec- – when not in guidance mode, from the Deactivating the low battery
tric vehicle is sufficient to reach your “attainable zone” main menu: your warning
destination: range distance is shown as a radi-
ous around your vehicle’s current This option enables you to deactivate
– chequered flag: the vehicle can position. the automatic proposal of recharging
reach your destination at the current stations when the battery level is low:
battery level;
– from the “Navigation” menu, select
– chequered flag with lightning symbol “Settings”, then “EV settings”.
on red background: look for a re- – select the “Disable low battery warn-
charging station to avoid running out ing” option.
of power.
Select this option again to reactivate
the low battery alert.
Note: if the ongoing guidance is indi-
cating an attainable charging point, the
low battery alert will not be triggered.
GB.50
Adding, managing saved addresses
Save an address from a Renaming a saved address
Accessing saved recent destination – From the main menu, press
– In the “Drive to...” menu, select “Navigation”, then “Settings” then
addresses “Manage saved locations”;
“Recent destinations”.
– select the recent destination you – select an address saved in the
To access saved addresses, from the wish to save; memory that you wish to remember;
main menu press “Navigation”, then – press “+” on the map screen then – on the screen/map, press “Rename”;
“Drive to...”, then “Saved locations”. “Add to saved locations”; – enter the new name for the saved
– give a name to an address, then address, then press “Next” to con-
press “Next”; firm.
– If the “Home” address is not regis-
tered, the system asks if the saved Deleting a saved address
address is your home, select “Yes”
or “No”. A message confirms that the – From the “Manage saved locations”
address has been saved. menu, select the saved address you
– If the “Home” address is registered, wish to delete;
the system offers to select this ad- – on the screen/map, press “Delete”;
dress. – a message asks you to confirm the
deletion - press “Yes” to confirm or
“No” to cancel.
GB.51
Navigation settings (1/2)
Accessing the navigation
settings “Route planning” “Show POI on map”
From the “Navigation” menu, press
“Settings”, then select the element you Use this menu to define your route pref- This menu lets you display or hide Point
wish to modify: erences: of Interest (POI) categories on the map.
– “Turn off voice guidance”; Type of journey
– “Route planning”;
– “Show POI on map”; Select a journey type. The recom-
– “Manage POIs”; mended journey criterion is “Quickest”.
– “Voice”; “Manage POIs”
Toll roads
– “EV settings”;
– “Set home location”; Include toll roads (toll gates or similar). A point of interest (POI) is a service,
– “Manage saved locations”; establishment or tourist area close to a
– “Switch map”; Ferries
location (start point, destination city, en
– “Change map colours”; Include ferries (including railway fer- route, etc.). POIs are classed in differ-
– “Car symbol”; ries). ent categories, e.g. restaurants, muse-
– “Advanced” (Settings). ums, car parks, etc. There are several
High-occupancy vehicle lanes options to find a point of interest:
Include lanes reserved for vehicles oc- – category;
cupied by more than one passenger. – the name of the desired POI.
This menu allows you to add, change
Unpaved roads or delete POIs or POI categories.
“Turn off voice Include unpaved roads.
guidance”
This menu enables you to activate or
deactivate voice guidance.
“Voice”
This menu lets you choose the syn-
thetic or stored voice.
GB.52
Navigation settings (2/2)
Map behaviour
“Car symbol”
“Set home location” This menu enables you to set the fol-
This menu allows you to change the ve- lowing behaviour:
This menu lets you set or change your hicle icon on the navigation map 3D. – show lane views;
home address. – to pivot the map in the direction of
the journey when in 2D mode;
– to switch to 3D mode while the
journey is in progress;
“Manage saved – to activate automatic zoom in 2D
mode;
locations” “Advanced” – to activate automatic zoom in 3D
This menu lets you add, delete or mode.
rename your saved addresses. This menu enables you to change the
following advanced settings:
– “Map information”;
– “Map behaviour”; Traffic source
– “Traffic source”.
“Switch map” This menu displays the various traffic
information services available on your
This menu allows you to switch be- navigation system.
tween the maps saved on your SD card.
GB.53
Listening to the radio (1/5)
Selecting a wavelength
Accessing the Select the required waveband (AM, FM 1
radio or DR) by pressing 1:
– AM;
Multimedia screen
– FM;
2
From the main menu, press – DR.
“Multimedia”, then “Radio”.
You can also select the waveband 2
Radio front panel / Multimedia front using the steering column control (refer
panel to the control details).
Press the “Radio” button on the panel to Preset List Frequency
GB.54
Listening to the radio (2/5)
Radio DR1
AF | i-Traffic
1.Arrow
2.Decibel
6 13
3.BNR
4.Jazz FM
5.Radio Pop 7 14
Preset List Frequency Preset List Frequency Preset List
8 9 10 11 12 16 15
GB.55
Listening to the radio (3/5)
“List” mode Pop-up menu “+”. Text information (Radio text)
This mode displays a list of available Some FM radio stations broadcast
radio stations. FM or AM text information relating to their pro-
Press 13 or 14 to scroll through all the From one of the three modes, press “+” grammes (e.g. song titles).
stations or slide your finger across the to: Note: this information is only available
multimedia screen. – change the source (Radio, USB, SD, for certain radio stations.
etc.);
To update this list, please see the fol- – add a station to your favourites; DR (terrestrial digital radio)
lowing pages. – store a station as a preset; From one of the two modes, press “+”
– display text information; to:
“Preset” mode – access the radio settings. – change the source (Radio, USB, SD
This operating mode allows you to etc.) ;
recall the radio stations that you have Storing a station – Save as preset ;
previously stored on demand. For more From “Frequency” mode or “List” mode, – display radio text;
information, refer to “Storing a station” press “+” then “Save as preset”. – Accessing the digital radio services;
in this section. You can also press one of the preset – Accessing settings
Press the buttons (numbered 1 to 6) to buttons until you hear a beep.
select your stored stations. Storing a station
You can store up to six stations per
You can also change a saved station band. From “List” mode, press “+”, then “Save
using the steering column control. as preset”.
You can also press and hold one of the
preset buttons until you hear a beep.
You can store up to six radio stations.
GB.56
Listening to the radio (4/5)
Text information (Radio text) EPG (DR) program guide Radio settings
Some DR radio stations broadcast When this feature is activated, your
text information relating to their pro- audio system will display the station’s FM
grammes (e.g. song titles). upcoming programs of the day. From one of the three modes, press “+”
Note: this information is only available Note: This information is only available then “Radio” to access the radio set-
for certain radio stations. for the selected station’s next three tings menu. From the radio settings,
time slots. you can set the following elements:
Digital radio services – following an FM station;
From the pop-up menu, press “Digital Intellitext (DR) function – activate/deactivate traffic informa-
radio devices” to access the following This feature allows access to text in- tion;
services: formation recorded on some radio sta- – activate/deactivate the programme
tions. You can scroll through the text to type search;
– “EPG"; – update the list of radio stations.
display new updates on business, poli-
– “Intellitext"; tics, health, weather and sports.
Following a station FM (RDS-AF)
– “Slideshow”.
Slideshow The frequency of an “FM” radio station
This function runs through all the photos may change depending on the geo-
as a slideshow. graphical area.
In order to keep listening to the same
radio station when driving, activate the
“RDS-AF" function so that your audio
system can automatically retune the
frequency.
GB.57
Listening to the radio (5/5)
Note: not all radio stations offer this DR (terrestrial digital radio) Traffic information (i Traffic)
possibility. From one of the two modes, press “+” With this function activated, the source
Poor reception can sometimes cause to access the radio settings. From the is interrupted automatically to receive
erratic and annoying changes in fre- radio settings, you can set the follow- the traffic bulletins broadcast by some
quency. In this case you should deac- ing elements: DR radio stations.
tivate the automatic frequency retuning. – “AF” (Alternative frequency);
– “i-Traffic” (Traffic Programme); Programme type search (PTY)
To activate/deactivate this function, – “PTY” (Programme type); With this function activated, the audio
refer to the section on “Audio settings”. – “Simulcast” system lets you display the type of pro-
– “i-Announcement” gramme (news, sport etc.) currently
Traffic information (i Traffic) – “Update the list” (DR). broadcast.
When this function is activated, the
source is interrupted automatically to Following a radio station DR (AF) Simulcast
receive the traffic bulletins broadcast A DR radio station can change accord- This function lets you switch from one
by some FM radio stations. ing to the geographical area. In order to DR station to the same FM station on
keep listening to the same radio station signal loss.
Programme type search (PTY) when driving, activate the AF function
so the audio system can retune the fre- i-Announcement
When this function is activated, your quency automatically. This function lets you display informa-
audio system allows you to display the Note: not all radio stations offer this tion (weather, etc.).
type of programme (news, sport etc.) possibility.
currently being broadcast. Poor reception can sometimes cause Updating the list (DR)
erratic and annoying changes. In this This feature allows you to perform an
Update radio list update of all stations in your area.
case you should deactivate the auto-
Select this menu to update the list of matic frequency retuning.
radio stations.
GB.58
Media
Playback
Accessing media You can choose between playing all the
tracks or playing a single track.
USB key
GB.59
Photo reader
– alternate between miniature and
fullscreen modes by pressing 3;
Accessing photos – make a new photo selection by
Holiday photos .png pressing 4.
From the “Multimedia” menu, press
1 2
“Pictures” then select the connected Pop-up menu “+”.
source (SD card or USB, etc.) to access
the photos. The system offers you two When viewing a photo/slideshow, press
options: “+” to:
From the list of folders/photos, press Playback – change the display time for each
“+” to: You can choose between reading all photo in the slideshow;
the photos in a slideshow or viewing a – change the type of display (normal or
– change the source; fullscreen).
– access photo settings. single photo.
When viewing a photo, you can: Press “Done” to save your changes.
Note: For more information on compa-
tible photo formats, please consult an – access the previous photo by press- Note: the display is in normal mode by
Authorised Dealer. ing 1; default.
– access the next photo by pressing 2;
GB.60
Video playback
– access the following video by press-
ing 3;
Accessing videos – view the scroll bar 4;
USB key – view the video in fullscreen 5;
– “New selection” videos by press-
From the “Multimedia” menu, press Landscapes
ing 6.
“Video” then select the source con-
nected (SD card, USB, etc.) to access
videos. The system offers you two op- Pop-up menu “+”.
tions: 1 2 3 4 During video playback, press “+” to:
– “play all videos”;
– “play a video”. – change the source;
New selection Full screen
– access video settings.
Note: Some formats may not be read-
able by the system. 6 5 Settings
Options from folders From the settings, you can choose the
Playback type of display, normal (half-screen) or
From the list of folders/videos, press “+” fullscreen.
to: You can choose between playing all the
videos or playing a single video. Press “Done” to confirm.
– change the source;
– access video settings. When playing a video, you can: Note: the display is in normal mode by
– access the previous video by press- default.
Note: For more information on compat-
ible video formats, please consult an ing 1;
Authorised Dealer. – pause by pressing 2;
GB.61
Multimedia settings (1/2)
Accessing
multimedia “Sound” “Radio”
settings
This menu allows you to configure dif- This menu enables you to adjust the
From the “Multimedia” menu, press ferent sound settings: radio settings:
“Settings”, then select the element you
wish to modify: – “Spatialisation”, for setting – activate/deactivate searching for
sound distribution in the vehicle; alternative frequencies;
– “Sound”; – Activate/Deactivate the i-trafic;
– “Bass Treble”, to adjust the
– “Radio”; treble and bass levels. Once – activate/deactivate programme
you have made the adjustments, type;
– “Media”
press the “Done” button to con- – update list of saved radio sta-
– “Pictures” ; tions.
firm your changes;
– “Video”.
– “AGC Arkamys”, to equalise
the sound volume between two
audio tracks; “Media”
GB.62
Multimedia settings (2/2)
“Pictures” “Video”
This menu allows you to adjust the mul- This menu enables you to set the
timedia settings: type of video display:
– set the timing of each picture in – “Normal view”;
the slideshow; – “Full screen”.
– configure the default view for pic-
tures.
GB.63
Pairing and unpairing a telephone (1/2)
Second method of pairing from a
Accessing the phone
Telephone menu Activate the R-LINK connection on
your phone and set its status to “vis-
From the main menu, press “Phone”. Manage devices ible”.
Note: if no telephones are paired to the To use the device features, you must first set up a Bluetooth
connection between your device and your R-Link. Run the Bluetooth® device search on
system, “Settings” will be the only sec- your phone.
tion you can access. Select “Renault R-Link” on your phone
Do you want to do that now?
list.
Pairing the first telephone No Yes
Add device
To pair your phone with the R-Link navi-
gation, there are two pairing methods.
GB.64
Pairing, unpairing a telephone (2/2)
Pairing another telephone Unpairing a phone
From your telephone, activate the From the main menu, select
Bluetooth® connection. “Telephone”, “Settings”, then “Manage
From the “Telephone” menu, press devices”.
“Settings”, then “Manage devices”. From the list of paired telephones in
From the list of paired phones in the the “Manage devices” menu, press
“Manage devices” menu, press the the button on the pop-up menu, then
“Add device” button to add a phone to “Delete device(s)”. Select the device
the list. you want to unpair on the multimedia
system screen, then press “Delete”.
GB.65
Connecting, disconnecting a telephone
Connecting a paired phone Manual connection (changing the
phone connected)
No phone can be connected to the
hands-free phone system if it has not From the “Phone” menu, press
first been paired. Please refer to the Manage devices
“Settings”, then “Manage devices”.
information on “Pairing a telephone” Mike’s phone You will find the list of phones already
in the “Pairing,unpairing a telephone” paired.
section. Select the phone from the list to be con-
Your phone must be connected to the nected, then press “Add device”.
hands-free phone system in order to
use all its functions.
Disconnect a phone
Add device
From the “Phone” menu, press
“Settings”, then “Manage devices”.
Select the phone to be disconnected
from the list.
Automatic connection
Switching off the telephone will also
Once the ignition is switched on, the cause it to be disconnected.
hands-free phone system searches
for paired phones in the vicinity (if the Note: if a call is in progress when the
Bluetooth® connection is activated). phone is disconnected, the call will
automatically be transferred to your
Searching starts with the last paired phone.
telephone.
Note: It is recommended that you
accept automatic device recognition.
GB.66
Managing the phonebook
Note: the contacts saved on the SIM Adding a contact to the
card SIM on your phone are not vis- Favourites page
ible. Only contacts saved on the From the “Phone” menu, select
Phonebook Find phone are visible. “Phonebook”, then the contact to be
Benjamin Legrand Note: to access the phonebook from added using the multimedia screen.
Caroline Felini the multimedia system, you will need Then press the “+” menu and "Add to
Cody Hecquet
to authorise data sharing on your tele- Favourites”.
phone. Please refer to the “Pairing, Note: From the welcome page, press
Daisy Wiston
unpairing a telephone” section, and the “Favourites” button to access your
Jalen Richard your telephone instructions. favourite numbers.
Confidentiality
The contact list of each phone is stored
in the memory by the hands-free
Downloading the phone Updating the system.
memory phonebook For reasons of confidentiality, each
By default, when pairing and connect- downloaded contacts list can only be
ing a telephone, the contacts are syn- You can transfer your phone contacts viewed when the corresponding tele-
chronised automatically. The multi- into the handset memory of your hands- phone is connected.
media system will warn you that your free phone system via Bluetooth® (if
mobile device data will be updated your phone allows this).
when synchronisation is complete. From the “Phone” menu, select
To deactivate automatic synchronisa- “Phonebook”, then the “+” menu, and
tion, please refer to the “Telephone set- press "Update phone data”.
tings” section in this document.
The system memory is restricted and
it is possible that all your contacts may
not be imported from your phone.
GB.67
Making, receiving a call (1/2)
Benjamin Legrand
With the telephone connected to the Caroline Felini 06 87 65 43 21 22:15
Jalen Richard quested to select the number to call). Daisy Wiston 06 56 78 90 12 8:58
From the “Phone” menu, you can make Press one of the four tabs, then select
a call by selecting: the contact/number to call to start the
Making a call from
– a contact from the phonebook; call.
– a number from the call log; the log
– the keypad to dial the number.
With the telephone connected to the
Note: on the home page, press system, from the “Phone” menu, press
“Favourites” to access your favourite “Call logs”.
numbers.
Note: For safety reasons, favour the
voice recognition system . Refer to
the Section entitled “Using voice recog-
nition”.
GB.68
Making, receiving a call (2/2)
Receiving a call
When receiving a call, the reception Using voicemail
screen is displayed with any informa-
tion available on the caller:
Dial a number
GB.69
call log
Press a call log entry to call the relevant
Accessing the call 1 2 contact.
log For more information please consult
Call logs Find
the “Making, receiving a call” section.
With the telephone connected to the Caroline Felini 06 87 65 43 21 22:15
6 incoming calls;
5 missed calls; 7 6 5 4 3
4 outgoing calls.
For each list, the contacts are listed Browsing the call log
from the most recent to the oldest.
Press a tab to view its content.
Press the “Up” 2 and “Down” 3 buttons
to scroll through the list of calls.
You can search for a contact by press-
ing the “Find” button 1. If the contact
has several numbers, you are asked
to select the number to call. The call
is made automatically by pressing the
contact’s number.
GB.70
during a call
– place a call on hold by pressing “+”
then select “On hold”. To pick up a
call on hold, press “Continue”;
Phone - Calling
– switch the call to the phone by press-
ing “+” then select “Handset”.
Daisy Wiston
06 56 78 90 12 Note: some telephones disconnect
Outgoing call from the system during a call transfer.
Call duration
During a call, you can return to other
00m:01s system functions (navigation, etc.):
– by pressing the button to return to
End call Keyboard the previous menu,
or
– by pressing the button to return to
your multimedia system welcome
screen, then “NAV”.
During a call you can: For more information, refer to the
– adjust the volume by pressing the “Introduction to controls” section.
control buttons on the steering wheel
of your vehicle;
– end communication by pressing
“End call” or by pressing the steering
column control buttons;
GB.71
phone settings
“Activate Bluetooth”
Accessing Tick this option to activate or deacti-
telephone settings vate the Bluetooth® on the hands-free
Settings
system.
From the “Phone” menu, press
“Automatically download phone
Manage devices
“Settings”.
Sound levels
data”
The following choices are offered: Voice mail configuration
Tick this option to activate or deacti-
– “Manage devices”; Activate Bluetooth
vate the automatic download of data
– “Sound levels”; Automatically download phone data from the telephone to the multimedia
– “Voice mail configuration”; system.
– “Activate Bluetooth”; Done
“Manage devices”
Refer to the information on “Pairing/un-
pairing a phone”.
“Sound levels”
This option allows you to adjust the
audio level of the hands-free system
and the ringtone.
GB.72
Driving Eco²
To save your data, press “Save”, then
Access the Driving select the type of journey taken from “My preferred trips”
Eco² menu the following list:
– “Home-Work”;
– “Vacation”; Once you have saved a specific jour-
– “Weekends”; ney (see information on “Trip report”),
From the main menu, press “Vehicle”,
– “Tour”; this menu will display changes in
then “Driving Eco²”.
– “Personal”. your driving style in the following cat-
The “Driving Eco²” menu grants egories:
To reset your data, press “Reset”. A
access to the following information: – “Last trip saved”;
message will ask you to confirm the
– “Trip report”; data reset. Press “Yes” to confirm or – “Home-Work”;
– “My preferred trips”; “No” to cancel. – “Vacation”;
– “Eco-coaching”. – “Weekends”;
– “Tour”;
– “Personal”.
“Trip report”
GB.73
Parking distance control, Reversing camera (1/2)
Adjusting the audio volume
From the “Vehicle” menu, select
“Settings”, press “Parking assistance”,
Parking assistance
then “Volume” and adjust the parking
Rear camera view settings
Volume
Done Done
1 2
GB.74
Parking distance control, reversing camera (2/2)
Display settings
From the “Vehicle” menu, go to
“Settings”, press “Rear camera view”,
then adjust the following settings: Easy park assist
– brightness;
– colour;
Parallel parking
GB.75
Electric vehicle (1/2)
Access the
Electrical vehicle
menu Energy flow Consumption details
Used energy: :
This menu shows you a diagram of the This menu can be used to display a dia-
vehicle, and indicates the points where gram of the vehicle indicating the points
the vehicle is consuming energy or is where the vehicle is consuming energy
generating energy to recharge the trac- (when the vehicle is consuming energy
tion battery. or generating energy to recharge the
traction battery) and compares it to the
last fifteen minutes of driving.
The following appear on the right-hand
side of the screen:
1 energy consumed;
2 energy consumption of accessories
(air-conditioning, radio, etc);
3 recovered energy.
GB.76
Electric vehicle (2/2)
Start End
Always Start at Calendar Off Time 1 Time 2
charging Mon.
Mon. Tue.
Select Select Select Select
The vehicle will charge when it is connected to a power source. Total of 10 hours Comfort timer is turned off.
Tue.
Charging from 6.30pm on Monday to 3.30am on Comfort timer only works if the vehicle is connected to a
Tuesday. power source.
GB.77
TAKE CARE (1/2)
You can activate/deactivate automatic
Access the “TAKE running by ticking the “Start ioniser at
CARE” menu. each vehicle start” option. Press “Done”
Ioniser to confirm your choice.
There is an air ioniser and a system to Off Clean Relax
check the quality of the outside air.
Select Select
Done
“Ioniser”
The air ioniser uses two modes:
– “Clean”: helps to reduce bacteria
and allergenic particles present in
the air;
– “Relax”: Creates a healthy and relax-
ing driving atmosphere through ion-
emission;
– “Off” (Stop emission).
Once the mode has been selected, it
will automatically stop after thirty min-
utes.
GB.78
TAKE CARE (2/2)
Polluted +
Polluted -
Good
Past minutes
.
GB.79
On-board computer/Vehicle settings
To reset the on-board computer and
instrument panel information, press
“Reset” and confirm by pressing
Onboard computer
“Yes”. Settings
Settings
Lane departure warning
Reset
From the “Vehicle” menu, select Done
“Settings”. Depending on the equip-
ment level, the following settings are
available:
– parking aids;
– activating/deactivating the blind spot – unlocking of the driver’s door when a
warning on the door mirrors; door is opened;
Onboard computer – lane departure warning; – activating/deactivating easy access
– automatic door mirror folding on when you get into or out of your ve-
From the “Vehicle” menu, select, locking the vehicle; hicle;
“Onboard computer” to access the fol- – automatic central locking/unlocking – configuration of the driving style indi-
lowing information since the last reset: when driving; cator on the instrument panel;
– activating/deactivating the rear – switching off the instrument panel
– date of starting calculation; screen wiper when switching to re- when charging;
– total distance; verse gear; – activating/deactivating the Driving
– activating/deactivating the daytime Eco² route plan;
– average speed;
running lights; – activating/deactivating automatic
– average fuel consumption; lighting of the main beam headlights.
– total fuel or energy consumption.
GB.80
Introduction to the Services menu (1/2)
Some services can be accessed with-
Access the “My out charge during the trial period, Presentation of “R-
services” menu. after which the subscription can be LINK Store”
extended via the R-LINK store or at
From the main menu, press “My serv- www.myrenault.com. R-LINK Store is the applications store
ices”. The pop-up menu “+” can be used to for your multimedia system. Here you
The “My services” menu grants access access the following functions: can buy applications or subscriptions
to the following elements: – “Add application”; to services through a secure online
– “Check for updates”; system.
– “R-LINK Store”;
– “Settings”. Please refer to the “Downloading and
– “Navigation services”;
– “Settings”; installing applications from R-LINK
– “E-Guide R-LINK”; Store" section for more information.
– “Email”;
– “User profiles”;
– “Renault Assistance”;
– your apps.
“Navigation services”
“Settings”
GB.81
Introduction to the Services menu (2/2)
This menu brings together all the in- This menu gives you access to Renault
structions. They can be consulted from assistance.
your multimedia system.
“Email”
“User profiles”
GB.82
Installing applications with R-Link Store (1/6)
R-LINK Store Select an application to get a descrip-
tion.
R-Link Store is an online store ena-
bling you to buy applications, services The pop-up menu “+” 1 can be used to
and content. R-LINK Store can be ac- access the following functions:
cessed directly from your multimedia Coyote Pack – “My products” displays a summary
system or from a computer connected
Renault
of the products bought along with the
to the Internet. Digital Pack
expiry dates for the products con-
Renault
cerned;
You must install R-LINK Toolbox soft- – “Search” can be used to search for a
ware on your computer to be able to Reader
product using key word(s);
download applications and map up- Renault
GB.83
Installing applications with R-Link Store (2/6)
Note: if the application you wish to
download is too large for the memory
available, the “Purchase” button will be
Product details
replaced by “Purchase not authorised”.
This product can only be purchased
R-LINK Store using your computer.
Read all your content using this application!
Buy
GB.84
Installing applications with R-Link Store (3/6)
Pay using MY Renault account Paying by credit or debit card
To make a payment using your MY Enter a valid email address, then press
Renault account: “OK”.
– Enter the e-mail address and pass- Enter your bank card details, then press
word for your account, then press “Done”.
“OK”.
– Choose a credit or debit card from Your application download will begin
those already linked to your account, immediately. Once the application has
or add a new one. been downloaded, its icon will be dis-
– Enter your bank card details, then played in the “Services” menu.
press “Done”. Note: the download time for the appli-
Your app download will begin imme- cation can vary depending on the size
diately. Once the application is down- of the application and on the reception
loaded, its icon is displayed in the “My quality on the mobile network.
Apps” menu.
Note: The card details you enter in the
Note: the download time for the appli- system when making a purchase may
cation can vary depending on the size be stored. To delete them from the
of the application and on the reception system, please see the information on
quality on the mobile network. “Deleting bank card details” in this sec-
Note: to use this type of payment, you tion.
must first create a MY Renault ac-
count. Please see the information on
“Creating an account in MY Renault” in
this section.
GB.85
Installing applications with R-Link Store (4/6)
Create an account for MY Renault Searching for updates
To buy and download applications from – Log in to your account MY Renault
a computer connected to the Internet then select the “Updates” 2 menu.
from www.myrenault.com, you must The website displays the updates avail-
Home / CATALOGUE first create an account MY Renault: able for your multimedia system, Apps,
MY APPLICATIONS AND SERVICES
Help
3 – from a computer connected to the map data, etc.
Internet, open your browser, go to – Select the updates you want to in-
2 www.myrenault.com and select your stall, then follow the procedure dis-
country; played on the screen to save them
– Click on the “Register” button and on the SD card.
follow the steps indicated on the Note: during synchronisation, the in-
website to create your account MY stallation of R-Link Toolbox software is
Renault. proposed. You should install this soft-
Note: When creating your MY Renault ware to be able to download products
Downloading and installing account, you will need your VIN and and updates to the SD card.
applications from a computer multimedia system serial number. Note: The R-Link Toolbox software can
You can also download applications Once you have created an account, be downloaded to a computer from the
from a computer connected to the you can explore the catalogue of appli- "Help” menu 3 of the R-Link Store.
Internet (particularly useful for large cations and search for product updates.
files). You can also manage your prod-
ucts from your computer and transfer
them to your multimedia system via the
system SD card.
Note: some products can only be pur-
chased from a computer connected to
the Internet, from the www.myrenault.
com website.
GB.86
Installing applications with R-Link Store (5/6)
Note: internal software updates for Note: During the finalisation of your
the multimedia system are only avail- purchase, installation of the R-Link
able from a computer connected to the Toolbox software is recommended.
Internet. You must install this software in order R-Link Store
Note: For more information, click on the to download products and updates pur-
chased and saved on the SD card.
martin.dupond@email.com
4
“Help” menu 3 or consult an Authorised
4
anne.durand@email.com
Dealer. Installing applications to your
Downloading Applications system using the SD card
– From the main menu on the MY Insert your vehicle’s multimedia system
Renault site, select the application SD card into the SD port on your com-
you wish to purchase then select puter.
“Buy”; R-Link Toolbox Installs the updates for
– Accept the general conditions of sale your navigation system.
to download the application; Once the updates are saved, you can
– Press the “Cancel” button to cancel insert the SD card into your vehicle's Managing personal data
the downloading process and return multimedia system.
The system stores e-mail addresses
to the application description page; and card details in the memory.
– Follow the instructions displayed on
Deleting an e-mail address
the screen to finalise your purchase.
When purchasing on the R-Link Store,
upon entering your email address, press
the button at the far right of the “Email”
line. The list of e-mail addresses saved
in the system is displayed.
Press 4 opposite the address you wish
to delete.
The address is immediately deleted.
GB.87
Installing applications with R-Link Store (6/6)
Note: the vehicle must be connected to
“Restore factory a mobile network to be able to delete
settings” card data.
R-Link Store
4
4970XXXXXXXXXX64
11/
2015
Christophe
Data sharing
You can authorise or reject data sharing Deleting credit or debit card data
from the moment the system is started. When you make a purchase with a
Please refer to the “Starting, Stopping” credit or debit card, press “Pay with a
section. card already saved in the memory” on
Refusing to share data stops the con- the purchase confirmation form.
nections of applications and services. The list of credit or debit cards saved in
the system is displayed.
Press 4 opposite the card data to be
deleted.
The credit or debit card data is immedi-
ately deleted.
GB.88
Android Auto™ (1/2)
Introduction – a window is displayed on your multi-
media system screen informing you
“Android Auto™” is an application that
that you need to accept the confiden-
can be downloaded from your smart-
tiality clauses of the application on
phone which enables you to use some
your smartphone in order to use the
applications on your phone from your
“Android Auto™” application;
multimedia system screen.
– confirm by pressing “Accept” on your
Note: to find out if your smartphone is
phone;
compatible with the “Android Auto™”
application, refer to the manufacturer's Driving Eco² – press the 1 button on your vehicle’s
website if there is one. multimedia system screen once
more.
Menu
The application is launched on the mul-
timedia system.
1 If the procedure described above fails,
repeat the operation.
First use
Note: the “Android Auto™” application
– Download and install the “Android will only operate if your smartphone is
Auto™” application from the appli- connected to your vehicle's USB port.
cation download platform on your
smartphone;
– connect your telephone to your multi-
media system’s USB port;
– a window is displayed on your multi-
media system screen;
– Accept the request by pressing the
“Yes” button;
The functions of the “Android
– press the 1 button on your vehicle’s
Auto™” application depend on the
multimedia system screen;
make and model of your telephone.
For further information, please refer
to the manufacturer's website if
there is one.
GB.89
Android Auto™ (2/2)
Note: when you are using the “Android
Auto™” application, certain functions of
your multimedia system will continue to
be carried out in the background. For
example if you start “Android Auto™”
and use the navigation on your smart-
phone while the radio on the multime-
2 dia system is currently playing, the
radio will continue to be broadcast.
GB.90
My Renault (1/5)
Introduction – sending your vehicle’s multimedia Downloading and installing
system a destination already set on the “MY Renault” application
“MY Renault” is an application that can
the application.
be downloaded from your smartphone on your smartphone
which allows you to receive and send – etc.
To download the “MY Renault” applica-
information relating to your vehicle, tion, you need:
such as:
– to open the application download
– the remaining range of your vehicle platform on your smartphone;
in kilometres (miles);
– to search for the “MY Renault” appli-
– the log of your daily, weekly and cation from the search bar of the ap-
annual mileage (kilometrage); plication download platform on your
– a record of journeys since the last smartphone;
reset (mileage (kilometrage), aver- – to click on “Download” once the “MY
age speed, distance travelled, av- Renault” application has been found.
erage fuel consumption, fuel con-
sumed and your eco scores); Once the download is complete, a new
icon, “MY Renault”, appears on your
– a summary of your eco scores; smartphone. The “MY Renault” appli-
– your vehicle’s tyre pressures; cation is installed on your smartphone.
– the place where your vehicle is Note: if you do not have a “MY Renault”
parked; account, refer to the information below
– a log of the journeys in the last thirty on creating an account.
days (date, duration, consumption,
distance);
GB.91
My Renault (2/5)
Creating a user account with Note: if an error message appears on
the “MY Renault” application. the screen on your smartphone, make
sure that you have correctly completed
To use the “MY Renault” application, the fields with the information required.
you need to create a user account. To
do this:
– open the “MY Renault” application
on your smartphone;
– select “Create my account” from the
main menu of the application;
– fill the fields with the information re-
quired for creating your account then
confirm by selecting “Create my ac-
count” at the bottom of the screen.
A confirmation message appears on the
screen on your smartphone confirming
the creation of the account. A confirma-
tion e-mail has been sent to you via the
e-mail address you have provided.
– Confirm and activate your account
by clicking on the link displayed in
the e-mail confirming the creation of
your “MY Renault” account.
GB.92
My Renault (3/5)
In order to access the following infor- Downloading, installing and Synchronise your MY Renault
mation on your vehicle using the “MY activating the “My Roads” account with your vehicle.
Renault” application, you must synchro- application onto your multimedia
nise the application with your vehicle. system From the “MY Renault” application:
To do this, the “My Roads” application To do this, from your vehicle: – log in to your account;
must be installed on your multimedia – add your vehicle to your “MY Renault”
system. If your multimedia system does – use your vehicle’s multimedia system account and add the required infor-
not have the “My Roads” application, to download and install the “My mation;
you need to download it, install it then Routes” application via the R-Link – press the “Synchronisation” button
activate it via your multimedia system Store (for more information, see the in order to start synchronising your
and the R-Link Store. For more infor- section on “Downloading and install- smartphone with the vehicle;
mation, please refer to the information ing applications”); – enter the code displayed on your
on “Downloading and installing the “My – Open the “My Routes” application to multimedia system screen into the
Roads” application onto your multime- activate it. “MY Renault” application.
dia system” in this section. The “My Routes” application is installed Note: if you want to synchronise the
Note: the “My Roads” application is on your multimedia system. “MY Renault” application with your ve-
normally already installed on your mul- hicle, you must be present in your ve-
timedia system. If this is not the case, hicle, parked in an area with network
please refer to the information on coverage and your vehicle's multimedia
“Downloading and installing the “My system must be switched on.
Roads” application onto your multime-
Note: if you do not synchronise the “MY
dia system” in this section.
Renault” application with your vehicle,
you will still be able to access your
service contract(s).
GB.93
My Renault (4/5)
GB.94
My Renault (5/5)
Garage RENAULT
78280 GUYANCOURT
1
MY Renault in Android Auto™ Activating the MY Renault – click on the MY Renault menu;
This function can be used to access application in Android Auto™ – confirm the connection by pressing
the MY Renault application in Android To activate the MY Renault application “OK”.
Auto™ and to display the following in- in Android Auto™:
formation on your multimedia system
screen: – download and install the MY Renault
application. See the paragraph on
– My Dealership; “Creating a user account”;
– Renault Assistance; – make sure that you have added your
– Condition of the vehicle; vehicle to the MY Renault account.
See the paragraph on “Linking your
– Indicator lights; MY Renault account to your vehicle”; For safety reasons, you may only
– My Journeys; consult the MY Renault informa-
– press the 1 button on the Android
tion while the vehicle is stopped.
– My Maintenance; Auto™ screen;
When the vehicle is being driven,
– Contracts and Warranties. an information screen is displayed
for 5 seconds before automatically
switching to the navigation screen.
GB.95
Services Settings
Delete application data
Accessing the Select the application from which you “Update
services settings wish to delete data, select the first tab, applications”
press “+” then “Delete application data”.
From the main menu, press “Services”. This menu lets you search for installed
Deleting an application application updates, but requires a
The “Settings” menu enables you to Select the application you want to
adjust the following elements: valid subscription.
delete, select the first tab, press “+”
– “Applications manager”; then “Delete application”.
– “Navigation services”; Note: the original multimedia system
– “Update applications”; applications cannot be removed.
– “Data sharing settings”. You can only delete the user data. “Data sharing
Select “+”, then “Clear user data”. settings”
This menu enables you to activate or
deactivate data sharing.
Note: in the event of deactivating data
sharing, certain applications may not
operate correctly.
“Applications
manager”
The applications manager enables you
to delete application data, uninstall ap-
plications and view the following infor-
mation:
– “About”; “Navigation
– “System usage”; services”
– “Confidentiality”.
For further information, please refer to
the section on “Navigation services”.
GB.96
system settings (1/3)
Accessing the
“Language” “Sound”
system settings
From the main menu, press “System”. This menu enables you to select a lan- This menu enables you to adjust the
The “System settings” menu enables guage to apply to the system. Select following settings:
you to adjust the following elements: the desired language, then a voice.
– “Language”;
– “Display”; “Sound levels”
– “Sound”;
– “Clock”; This function allows you to set the
– “Safety warnings”; “Display” main sound levels:
– “Home screen”; – traffic information;
– “Keyboards”; – hands-free system;
– “Set units”; This menu enables you to adjust the – phone ringtone;
– “Status & Information”; following settings: – navigation instructions;
– “Remove SD-card”; – synthetic voices;
– “Daytime brightness”;
– “Restore factory settings”; – application alerts.
– “Nighttime brightness”;
– “Android Auto Settings™".
– “Automatic day/night mode”: select
this option to enable the display
to switch automatically from Night
mode to Day mode. The system
switches to Night mode when the ex-
ternal light is low or when the head-
lights are lit;
– “Force night mode”: select this
option to force the display to switch
to Night mode.
GB.97
System settings (2/3)
“Speed sensitivity
volume” “Clock”
This function allows you to automati-
Change Home Page
cally increase the volume based on This menu lets you set the system Home page 1
vehicle speed. clock and the format of the time dis- Home page 2
play. It is recommended to keep the au- Music
“Voice output
Home page 4 Driving Eco²
settings”
Home page 5
Done
GB.98
System settings (3/3)
“Set units” This menu enables you to eject the SD This menu allows you to set the pref-
card safely. erences for the “Android Auto™” appli-
To remove the SD card from the SD cation and access the instruction tuto-
This menu allows you to choose the rial for the application on your vehicle's
port, please refer to “SD card: use, ini-
type of unit for various elements: multimedia system.
tialisation”.
– “Distance units”;
– “GPS co-ordinate display”;
– “Temperature units”;
– “Barometer units”.
GB.99
operating faults (1/3)
System
Description Causes Solutions
The multimedia screen does not light up. The interior temperature is lower than Switch on the ventilation so that a tem-
-20°C. perature above -20°C is reached.
No image is displayed. The screen is on standby. Ensure that the screen is not on standby.
No sound can be heard. The volume is set to minimum or pause. Increase the volume or deactivate pause.
No sound comes from the left, right, front The balance or fader settings are incor- Adjust the sound balance or fader cor-
or rear speakers. rect. rectly.
No map is displayed. The SD card is missing or damaged. Check the SD card is present.
Phone
Description Causes Solutions
No sounds or ringtone can be heard. The mobile phone is not connected to Ensure that the mobile phone is con-
the system. nected to the system. Increase the
The volume is set to minimum or pause. volume or deactivate pause.
Impossible to make a call. The mobile phone is not connected to Ensure that the mobile phone is con-
the system. nected to the system. Unlock the phone
keypad.
GB.100
operating faults (2/3)
Navigation
Description Causes Solutions
The vehicle position on the screen does Incorrect positioning of the vehicle Move the vehicle until reception of the
not match its actual location or the GPS caused by GPS reception. GPS signal is improved.
warning light on the screen remains grey
or yellow.
The directions on the screen do not corre- The SD card is out of date. Download updates from www.myrenault.
spond to the actual road. The map is not up to date. com.
Traffic flow information is not displayed on Guidance has not been activated. Ensure guidance is activated. Select a
the screen. The subscription is not active. destination and begin the guidance.
Certain items on the menu are not avail- Depending on the current command,
able. some items will be unavailable.
Voice guidance is unavailable. The navigation system does not include Increase the volume. Ensure voice guid-
the intersection. ance is activated. Ensure guidance is ac-
Voice guidance or guidance is deacti- tivated.
vated.
The directions of the voice guidance do The voice guidance may vary according Drive according to the actual conditions.
not correspond to your exact location. to the environment.
The suggested route does not start or end The destination is not yet recognised by Enter a road near to the required desti-
at the required destination. the system. nation.
The system calculates a detour automati- Prioritising avoid area settings or traffic Deactivate the “avoid area settings”
cally. restrictions will affect the calculation of function.
the route.
GB.101
operating faults (3/3)
Voice recognition
Description Causes Solutions
The system does not recognise the The voice command has not been rec- Check that the spoken voice command
voice command stated. ognised. exists (refer to the “Using voice com-
The voice recognition time delay has ex- mands” section). Speak within the voice
pired. recognition time delay.
The voice recognition cannot operate Speak in a quiet environment.
properly due to a noisy environment.
The user spoke after the beep.
GB.102
Alphabetical index (1/2)
A F
address................................................ GB.28 → GB.32, GB.51 fascias and steering wheel controls.................. GB.5 → GB.13
air ioniser...........................................................GB.78 – GB.79 favourite
Android Auto™......................................GB.89 – GB.90, GB.95 add............................................................................. GB.21
answering a call.................................................GB.68 – GB.69 delete......................................................................... GB.21
fuel
B consumption.............................................................. GB.80
buttons................................................... GB.5 → GB.13, GB.15 fuel economy................................................................... GB.73
C G
call history....................................................................... GB.70 guidance
colours............................................................................. GB.97 activation........................................ GB.28 → GB.32, GB.35
communication................................................................ GB.71 cancellation................................................................ GB.37
compass.......................................................................... GB.34 voice.......................................................... GB.35 → GB.38
connect a telephone........................................................ GB.66
connected services................GB.44 – GB.45, GB.81 → GB.88 L
controls.................................. GB.5 → GB.13, GB.15 → GB.18 language
change....................................................................... GB.97
D
destination....................................................... GB.28 → GB.32 M
detailed route................................................... GB.35 → GB.39 map
detour....................................GB.37 – GB.38, GB.40 → GB.42 display............................................................GB.34, GB.43
dialling a number...............................................GB.68 – GB.69 map symbols.............................................................. GB.34
disconnect a telephone................................................... GB.66 scale.......................................................................... GB.34
MENU.............................................................. GB.15 → GB.18
E MP3................................................................................. GB.59
ECO driving..................................................................... GB.73 MP3 player...................................................................... GB.59
electric vehicle My Renault...................................................... GB.91 → GB.95
charge............................... GB.48 – GB.49, GB.76 – GB.77
vehicle range...............................................GB.76 – GB.77 N
electric vehicle.......................................GB.46 – GB.47, GB.50 navigation............................ GB.28 → GB.32, GB.40 → GB.42
ending a call......................................................GB.68 – GB.69 navigation system.............................................................. GB.3
energy consumption..........................................GB.76 – GB.77
energy-saving.................................................................. GB.73 O
environment..................................................................... GB.73 operating faults............................................ GB.100 → GB.102
operation...........................................................GB.19 – GB.20
GB.103
Alphabetical index (2/2)
P system
parking distance control....................................GB.74 – GB.75 initialisation................................................................ GB.14
personal data update..........................................................GB.86 – GB.87
delete...........................................................GB.87 – GB.88
precautions during use...................................................... GB.3 T
telephone contacts list..................................................... GB.67
R traffic information............................................. GB.40 → GB.42
radio trip computer and warning system.................................. GB.80
automatic mode......................................... GB.54 → GB.58
automatic station storage........................... GB.54 → GB.58 U
choosing a station...................................... GB.54 → GB.58 unpairing a telephone........................................GB.64 – GB.65
manual mode............................................. GB.54 → GB.58 USB..................................................... GB.59 → GB.61, GB.89
station pretuning........................................ GB.54 → GB.58
rear view camera...............................................GB.74 – GB.75 V
receiving a call...................................................GB.68 – GB.69 voice
rejecting a call...................................................GB.68 – GB.69 activate...................................................................... GB.33
deactivate.................................................................. GB.33
S voice control........................................ GB.22 → GB.27, GB.90
screen voice recognition................................. GB.22 → GB.27, GB.90
monitor.........................................................GB.19 – GB.20 volume............................................................................. GB.33
navigation display .................................... GB.35 → GB.38
SD card........GB.3, GB.14, GB.59 → GB.61, GB.83 → GB.88,
GB.99
second route..........................GB.37 – GB.38, GB.40 → GB.42
settings
audio................................GB.62 – GB.63, GB.97 → GB.99
brightness.................................................................. GB.97
customising................................................ GB.97 → GB.99
navigation....................................................GB.52 – GB.53
settings....................................GB.72, GB.80, GB.96 → GB.99
soft button.............................................. GB.4, GB.15 → GB.18
sounds
activate...................................................................... GB.33
deactivate.................................................................. GB.33
stage................................................................................ GB.39
switching off.......................................................GB.19 – GB.20
GB.104
( h ttps://easyconnect.renault.com )
Renault s.a.s. Société par Actions Simplifiée au capital de 533 941 113 € / 13-15, quai Le Gallo
92100 Boulogne-Billancourt R.C.S. Nanterre 780 129 987 — SIRET 780 129 987 03591 / Tél. : 0810 40 50 60
NX 1048-11 – 77 11 411 686 – 01/2019 – Edition anglaise
à7711411686êêûä – –