Professional Documents
Culture Documents
Three-wire c 24 V
2 2 NO PNP Pre-cabled (L = 2 m) XT1 12S1PAL2 0.070
NPN Pre-cabled (L = 2 m) XT1 12S1NAL2 0.070
Three-wire c 24 V
5 NO PNP Pre-cabled (L = 2 m) XT1 18B1PAL2 0.150
4 NPN Pre-cabled (L = 2 m) XT1 18B1NAL2 0.150
XT1 18B1ppL2
Two-wire a 24-240 V
5 NO – Pre-cabled (L = 2 m) XT1 18B1FAL2 0.150
NC – Pre-cabled (L = 2 m) XT1 18B1FBL2 0.150
6 Three-wire c 24 V
10 NO PNP Pre-cabled (L = 2 m) XT1 30B1PAL2 0.270
NPN Pre-cabled (L = 2 m) XT1 30B1NAL2 0.270
Two-wire a 24-240 V
10 NO – Pre-cabled (L = 2 m) XT1 30B1FAL2 0.270
7 NC – Pre-cabled (L = 2 m) XT1 30B1FBL2 0.270
10
XT1 32B1FpL2
Characteristics
Sensor type M12 M18 M30 Ø 32
XT1 12p
3-wire c
XT1 18p
3-wire c 2-wire a
XT1 30p
3-wire c 2-wire a
XT1 32p
2-wire a
1
4-wire c 4-wire c 4-wire c
Product certifications e
Conformity to standards IEC 60947-5-2
Connection Pre-cabled, length 2 m p p p p p p
Connector, M12 p p – p – –
2
Main characteristics
Nominal sensing distance Sn Conforming to mm 2 5 10 15
IEC 60947-5-2
Assured sensing distance Sa Conforming to mm 0…1.44 0…3.60 0…3.60 0…7.2 0…7.2 0…11
IEC 60947-5-2
Adjustment zone mm 0.5…5 1…8 1…5 2…20 2…15 0…20
Repeat accuracy < 0.1 Sr < 0.15 Sr 3
Differential travel < 0.2 Sr < 0.2 Sr
Output characteristics
Output state indication Yellow LED
Switching capacity mA 200 200 330 200 330 300
Maximum switching frequency
Protection against short-circuits
Hz 300
p
200
p
25
– (1)
150
p
25
– (1)
15
– (1)
4
Voltage drop, closed state V y2 y2 y6 y2 y6 y 10
Residual current, open state mA < 0.1 < 0.1 <5 < 0.1 <5 <5
Delays First-up ms y 30 y 30 y 100 y 30 y 100 y 200
Response ms y5 y5 y 20 y5 y 20 y 30
Recovery ms y5 y5 y 20 y5 y 20 y 30
5
Supply
Rated supply voltage V c 24 c 24 a 24 - 240 c 24 a 24 - 240 a 24 - 240
50/60 Hz 50/60 Hz 50/60 Hz
Voltage limits (including ripple) V c 12 - 30 c 12 - 30 a 20 - 264 c 12 - 30 a 20 - 264 a 20 - 264
50/60 Hz 50/60 Hz 50/60 Hz
Current consumption, no-load mA < 15 < 15 <3 < 15 <3 <4
Protection against reverse polarity Yes Yes – Yes – – 6
Environment
Materials Case Stainless Nickel plated brass
steel 303
Cable PVC
Number and c.s.a.
of wires
3 x 0.14 mm2 3 x 0.34 mm2 3 x 0.34 mm2 3 x 0.75 mm2 3 x 0.75 mm2 3 x 0.34 mm2
or or or 7
4 x 0.14 mm2 4 x 0.34 mm2 4 x 0.5 mm2
Degree of protection Conforming to IP 67 (2) IP 67
IEC 60529 and IP 65 for sensors XT1 12S1PCM12 and XT1 18B1PCM12
IEC 60947-5-2
Storage and operating temperature °C - 25…+ 70
Vibration resistance Conforming to 10 gn, ± 1 mm (f = 10…55 Hz)
IEC 60068-2-6 8
Shock resistance Conforming to 30 gn, 11 ms 30 gn, 6 ms
IEC 60068-2-27
Resistance to electromagnetic interference
Electrostatic discharges Conforming to kV 8 (air) / 4 (contact)
IEC 61000-4-2
Radiated electromagnetic Conforming to V/m 3
fields
Fast transients
IEC 61000-4-3
Conforming to kV 2 1
9
IEC 61000-4-4
(1) These sensors do not incorporate overload or short-circuit protection and therefore, it is essential to connect a “quick-blow” fuse in series with the load (see page
31158/2).
(2) With adjustment potentiometer sealing screw.
10
Dimensions
M12, pre-cabled M12, M12 connector
1 XT1 12S1ppL2 XT1 12S1PCM12
M12x1
M12x1
M12x1
37 (2) 40
50 51
60
M18x1
4
M12x1
55 (2) (4) 55
70 14 70
5 36 5 36
M30x1,5
M30x1,5
6
M12x1
8
Ø32
42,5
58
15,25
Ø32
80 (1)
98,5
20 19,75
9
(1) Adjustment potentiometer.
(2) LED.
(3) Sealing screw.
(4) Potentiometer beneath sealing screw.
(5) Potentiometer beneath protective flap.
10
Wiring schemes
Connector version
M12 connector 4-wire c , PNP
NO + NC output, M12
1
4 3
XT1 12/18/30ppppM12
1
NO/4
+
PNP
1 2 NC/2
3 –
2
Pre-cabled version
Cable 4-wire c , PNP 3-wire c , PNP 3-wire c , NPN
NO + NC output, NO output, NO output,
pre-cabled pre-cabled pre-cabled
XT1 12/18/30PCppL2 XT1 12/18/30PAppL2 XT1 12/18/30NAppL2
BU: Blue BN
NO/BK
+ BN + BN +
3
BN: Brown PNP PNP BK NPN BK
BK: Black NC/WH
WH: White BU – BU – BU –
YE/GN: Yellow/green
2-wire a 2-wire a
NO output NC output 4
XT1 18/30/32B1FAL2 XT1 18/30/32B1FBL2
BN XUZ E04 a BN XUZ E04 a
BU a BU a
YE/GN YE/GN
5
Adjustment
Sensitivity adjustment
2 1 1 Adjustment potentiometer
2 LED
– + 3 Adjustment using suitable 6
screwdriver (included
with sensor).
e e
8
e
10