You are on page 1of 6

ELECTROBOMBA DESAGÜE 2HP

Submersible 5LPS@10MTS
Electric The DOMO series electric pumps are available with
Pumps for twin-channel or vortex impeller (DOMO VX).
Solid-laden Designed to handle suspended solids up to 50 mm in
diameter (35 mm for DOMO 7 and DOMO 7VX).
Wastewater Four basic versions with 0.55 (0.75 HP) to 1.5 kW (2HP)
rated power.
DRIVELUB SEAL SYSTEM.
DOMO Series
Integrated capacitor (except
for DOMO 15 and DOMO 15 VX
with control box on cable).
Thermal overload
protection.
• The DOMO 7 and DOMO 7VX
versions feature:
– Rp 11/2” delivery port (female
gas).
– Handling of suspended solids
up to 35 mm in diameter.
– Fiberglass-reinforced
nylon impeller (stainless steel
impeller also available).
• The DOMO 10-15-20 and
DOMO 10-15-20 VX versions
feature:
– 2” delivery port, female gas
(can be turned into a flanged
version if an optional accessory
is installed).
APPLICATIONS – Handling of suspended solids
• Pumping of effluent (VX versions up to 50 mm in diameter.
– Stainless steel twin-
can also handle suspended solids).
• Emptying of septic tanks and channel or vortex impeller.
residential sumps.
• Draining of flooded basements and DRIVELUB SEAL SYSTEM
garages. •Watertight electric motor protected
by multiple seal system with oil
SPECIFICATIONS chamber.
• Continuous duty with 35°C A V-ring and silicon carbide
mechanical seal (extremely
liquids and fully submerged pump.
• Dry motor (class F insulation). resistant to wear and abrasion), as
• HO7RN-F type neoprene power well as a lip seal which is
continuously lubricated thanks to
cord.
• Maximum immersion depth: the DRIVELUB system, provide
an extremely efficient barrier against
5 m.
• Versions: infiltration.
Single-phase 220 V 60 Hz
2 poles. TABLE OF MATERIALS
Three-phase 380 V 60 Hz PART MATERIAL
2 poles. Pump body, STAINLESS STEEL
Other voltages are available on Motor casing (AISI 304 - DIN 1.4301)

request. DOMO 7 (VX) impeller FIBERGLASS-REINFORCED

• Motor power
DOMO 10-15-20 (VX) impeller
NYLON

STANINLESS STEEL
0.55 to 1.1 kW for (AISI 304 - DIN 1.4301)
single-phase versions. Lower mechanical seal SILICON CARBIDE/
0.55 to 1.5 kW for SILICON CARBIDE

three-phase versions. Upper lip seal NITRILE RUBBER

• The single-phase versions feature: Shaft extension STAINLESS RUBBER


Pre-assembled float (version (AISI 304 - DIN 1.4301)

without float available on request). Handle NYLON

15
PUMP SECTION AND LIST OF MAIN COMPONENTS
1 Handle
Made of fiberglass-reinforced nylon.
2 Test hole
The tightness of the motor joints is tested by
injecting compressed air.
3 Float
In compliance with European standards
4 Cable gland
The float cable can be secured at different
lenghts to start the pump at the desired
liquid level.
5 HO7RN-F type power supply
cables.
6 Capacitor
7 Dry wound motor
Class F windings and built-in thermal
protector (for single-phase versions).
8 Motor casing and pump body
AISI 304 stainless steel.
9 Seal system
10 Shaft
AISI 304 stainless steel.
11 Delivery port
2” (50 mm) diam. except for DOMO 7 (VX)
that has 11/4” (35 mm) ports.
12 Impeller
Vortex or twin-channel type, made of AISI
304 stainless steel; DOMO 7 (VX) has a
fibreglass-reinforced nylon impeller.
A) All elastomers are made of nitrile rubber
(NBR).
B) All bolts and washers are made of AISI 304
stainless steel.

DRIVELUB SEAL SYSTEM


The electric motor is protected from ingress by a double
seal system with oil chamber.
A V-ring (A) made of nitrile rubber adheres like a suction
cup to the upper surface and constitutes a first efficient
barrier that prevents solid particles from coming into
contact with the mechanical seal.
The mechanical seal (B) made of silicon carbide (SIC
SEAL) is extremely resistant to abrasion thanks to its
exceptional hardness.
The second seal is a lip one (C). It is continuously
lubricated thanks to the rotation of the mechanical seal
spring which drives up the oil (ESSO MARCOL 82)
conveyed by the pipe (D).

16
DOMO SERIES
OPERATING CHARACTERISTICS AT 3450 rpm, 60 Hz

HYDRAULIC PERFORMANCE TABLE AT 60 Hz


PUMP TYPE RATED Q = DELIVERY
POWER l/min 0 100 150 200 250 280 350 400 500 600 670
3
m /h 0 6 9 12 15 16,8 21 24 30 36 40,2
kW HP H = TOTAL HEAD METRES COLUMN OF WATER
DOMO S76(T) - DOMO S76 GT 0,55 0,75 10,5 7,5 6,4 5,1 3,5 2,4 - - - - -
DOMO106(T) - DOMO106 GT 0,75 1 8,8 7,4 6,7 6,1 5,5 5,1 4,3 3,7 2,2 - -
DOMO156(T) - DOMO156 GT 1,1 1,5 12,4 - 9,6 8,8 8,1 7,7 6,8 6,1 4,7 3 -
DOMO206T - 1,5 2 14,5 - - 11,2 10,4 10 9 8,2 6,6 4,9 3,5
These performances are valid for liquids with density ρ = 1.0kg/dm and kinematic viscosity ν = 1mm/sec domo-2p60-en_a_th

ELECTRICAL DATA (60 Hz, 3450 rpm) DOMO SERIES


PUMP TYPE INPUT INPUT CAPACITOR PUMP TYPE INPUT INPUT INPUT
POWER* CURRENT* POWER* CURRENT* CURRENT*
SINGLE-PHASE 220-230 V THREE-PHASE 220-230 V 380-400 V
kW A µF / 450 V kW A (1) A
DOMO S76 - DOMO S76 GT 0,84 4,21 20 DOMO S76T 0,73 - 1,32
DOMO106 - DOMO106 GT 1,1 5,39 22 DOMO106T 1,05 - 1,97
DOMO156 - DOMO156 GT 1,56 7,03 30 DOMO156T 1,45 - 2,54
- - - - DOMO206T 1,79 - 3,23
*Maximum value in specified range domo-2p60-en_a_te
(1) Available on request

17
DOMO VX SERIES
OPERATING CHARACTERISTICS AT 3450 rpm, 60 Hz

HYDRAULIC PERFORMANCE TABLE AT 60 Hz


PUMP TYPE RATED Q = DELIVERY
POWER l/min 0 80 100 150 200 230 300 350 400 500
3
m /h 0 4,8 6 9 12 13,8 18 21 24 30
kW HP H = TOTAL HEAD METRES COLUMN OF WATER
DOMO S76VX(T) - DOMO S76VX GT 0,55 0,75 8 5,9 5,5 4,3 3,1 2,3 - - - -
DOMO106VX(T) - DOMO106VX GT 0,75 1 7,4 - 6,3 5,5 4,7 4,2 2,9 1,9 - -
DOMO156VX(T) - DOMO156VX GT 1,1 1,5 10 - 8,8 8,2 7,4 6,9 5,6 4,6 3,5 -
DOMO206VXT - 1,5 2 11,8 - - 10,5 9,9 9,6 8,6 7,8 6,8 4,5
These performances are valid for liquids with density ρ = 1.0kg/dm and kinematic viscosity ν = 1mm/sec domovx-2p60-en_a_th

ELECTRICAL DATA (60 Hz, 3450 rpm) DOMO VX SERIES


PUMP TYPE INPUT INPUT CAPACITOR PUMP TYPE INPUT INPUT INPUT
POWER* CURRENT* POWER* CURRENT* CURRENT*
SINGLE-PHASE 220-230 V THREE-PHASE 220-230 V 380-400 V
kW A µF / 450 V kW A (1) A
DOMO S76VX - DOMO S76VX GT 0,84 4,22 20 DOMO S76VXT 0,73 - 1,33
DOMO106VX - DOMO106VX GT 1,1 5,40 22 DOMO106VXT 1,05 - 1,98
DOMO156VX - DOMO156VX GT 1,57 7,08 30 DOMO156VXT 1,46 - 2,56
- - - - DOMO206VXT 1,84 - 3,30
*Maximum value in specified range domovx-2p60-en_a_te
(1) Available on request

18
DOMO SERIES
DIMENSIONS AND WEIGHTS

PUMP TYPE DIMENSIONS (mm) DNM WEIGHT PUMP TYPE DIMENSIONS (mm) DNM WEIGHT
SINGLE-PHASE THREE-PHASE
H H1 C kg H H1 C kg
DOMO S76 DOMO S76 GT DOMO S76T
433 88 193 Rp1½ 11 386 88 193 Rp1½ 10
DOMO S76VX DOMO S76VX GT DOMO S76VXT
DOMO106 DOMO106 GT DOMO106T
463 111,5 198 Rp2 13 433 111,5 198 Rp2 11
D0MO106VX D0MO106VX GT D0MO106VXT
DOMO156 DOMO156 GT DOMO156T
463 111,5 198 Rp2 15 463 111,5 198 Rp2 13
DOMO156VX DOMO156VX GT DOMO156VXT
DOMO206T
- - - - - - - 463 111,5 198 Rp2 14
D0MO206VXT
domo-2p60-en_a_td

19
DOMO SERIES
INSTALLATION EXAMPLE

PUMP TYPE DIMENSIONS (mm)

H H2 L L1 A
DOMO S76 - DOMO S76 GT DOMO S76VX - DOMO S76VX GT 433 375 480 335 220
DOMO106 - DOMO106 GT DOMO106VX - DOMO106VX GT 463 415 495 350 250
DOMO156 - DOMO156 GT DOMO156VX - DOMO156VX GT 463 415 495 350 250

domoliv-2p60-en_a_td

20

You might also like