Professional Documents
Culture Documents
Data
Control
Level SPECIFICATION NO. ES 9-58-1 ISSUED: 4/20/73; ERL 92610
(Date and PRD No.)
1
REVISION:
(Letter, Date and PRD No.)
Prepared By:
P 95710 Abdul Ahmed 03/09/16
Materials Engineer
Approved By:
Jeff Price
Group Manager, Surface Engineering
ATTENTION
This copyrighted work and the information herein is proprietary to Caterpillar Inc., Solar Turbines
Incorporated, and/or subsidiaries of either. Without express, written proprietor permission, any
copying, disclosure, or use except that for which it is loaned, is prohibited.
CONTENTS
Paragraph Page
1.0 SCOPE 1
1.1 Purpose 1
1.2 Application 1
TABLES
Table Page
2 Approved Suppliers for Alternate Paint Systems Not included in ES 9-58, Table 2. 2
1.0 SCOPE
1.1 PURPOSE - This specification establishes the approved list of materials and
suppliers for turbomachinary paint systems.
1.2 APPLICATION - Turbomachinary paints are required for all Solar standard product
lines unless otherwise specified in the sales order or other contractual documentation. The
paint is destined to operate within the temperature range of -70 (-57°C) to +250°F (121°C).
Solar Specification
3.0 APPROVED MATERIALS: The following table lists approved materials used in the
existing Paint Systems as defined in ES 9-58, Table 2. Procedures necessary for
the application of these coatings shall be obtained directly from the coating
manufacturer. In the case of Ameron coatings, a Solar link on the Ameron web site
contains the application instructions of the approved paint systems.. Requirements
set forth in ES9-58 shall prevail when differences in manufacturer’s application
instructions and specification requirements exist.
Table-1
Approved Materials Used for Paint Systems Listed in ES9-58, Table 2
4.0 APPROVED SUPPLIERS - Suppliers in this list will apply alternate paint systems that are not
included in ES 9-58, Table 2. The systems listed in the table below have undergone qualification-
testing conforming to ES 9-58 requirements and are approved for use.
4.1 SUPPLIERS LIST - This list of approved suppliers and systems documents those that are
qualified to apply Paint Systems other than the ones established in ES 9-58, Table 2.
Table-2
Approved Suppliers for Alternate Paint Systems Not included in ES 9-58, Table 2.
WEG Coatings Lackpoxi N 2630 Primer with Induction Motors WEG - Jaragua'
Lackthane N 2677 Topcoat do Sul, Brazil