Gear Pitch: 6.28mm Gear Teeth Thickness: 3.14mm Total Gears: 5 ( 3 parimary gears & 2 Input and Output gears) Explanation: It starts from input gear (40mm diameter) with 20 teeth and thickness is 15mm. The 5000RPM start from there. The Second gear (200mm dia) with 100 teeth and 15 thicness and small gear attached with it also hav same dia and teeth to input gear. On that Second gear the RPM Step Down to 1000RPM. Now move to third one. It has same parameters. On that point RPM more Step Down to 200RPM. Fourth Gear, It has 160mm dia with 80 teeth and same thickness. On that point, RPM, Step down to 50RPM. Last gear or Output gear, It has 200mm dia with same thickness, on that point RPM moves to 10RPM. The gear ratio become 500:1 in this drivetrain.