Professional Documents
Culture Documents
4. All the finished steel plates shall be well and cleanly rolled to the
dimensions, sections and masses specified. The finished material shall
be reasonably free from surface flaws, laminations, rough/jagged and
imperfect edges, and all other harmful defects.
5. Max. carbon content for MS plates shall be 0.22% with maximum variation
over the specified limit of 0.02%.
6. Tests reports shall be supplied for all mandatory tests viz. tensile, yield,
elongation, bend and Impact (Charpy V-notch) as per the material
specifications.
Notes:
Vendor shall categorically confirm all the above points since otherwise
the offer shall not be accepted.