Professional Documents
Culture Documents
CI029/14
MMI DISPLAY set XM REV. 00
DEPACIANI
Nov 2014
Instructions to set XM Sensor on the Rig, equipped with MMI Display type.
Parameter can be set only if XM Sensor current is between 11mA and 13mA. Ideal setting is 12mA.
You can obtain it by turning properly the XM Sensor pin, respected to the mast elastic joint
coupling.
Be careful not to set it tumbled 180°: It will work wrongly in the opposite way.
Exit to main page with “Menu” and carefully check Rig’s functionality.
Il contenuto del presente documento, ed il documento in sè, sono di proprietà della CASAGRANDE S.p.A. Fontanafredda (PN) - vietata
la riproduzione e la trasmissione a terzi. The contents of this document, and the document per se, are the exclusive property of PUBLIC PAGE
CASAGRANDE S.p.A. Fontanafredda (PN) ITALY - the reproduction and transmissions thereof to others is strictly prohibited. 3/3