Professional Documents
Culture Documents
Nstreme Dual Passo A Passo
Nstreme Dual Passo A Passo
Here is a step-by-step explanation how to enable nstreme dual on a fresh installed MikroTik devices:
I. MikroTik Device 1
1.6. Creating nstreme dual interface and setting Tx and Rx radios and frequencies:
1.8. Checking the MAC address of the nstreme interface (in this example: 11:11:11:11:11:11):
2.6. Creating Nstreme dual interface and setting Tx and Rx radios and frequencies and setting the MAC address of the remote
nstreme interface (in this example: 11:11:11:11:11:11 [step 1.8]):
2.8. Checking the MAC address of the nstreme interface (in this example: 22:22:22:22:22:22):
1.9. Setting the MAC address of the remote nstreme interface (in this example: 22:22:22:22:22:22 [step 2.8]):