You are on page 1of 1

Pair With Bluetooth Basic functions :

((1) Power on: Press and hold the multifunction button for
(1) When switched off, press and hold the 3 seconds to power on manually.
multifunction button for 3 seconds to power on. The (2) Power off: Press and hold the multifunction button for
earphones will automatically enter pairing mode with 3 seconds to power off manually.
a prompt and the LED light will flash red and blue (3) Play/Pause: Tap the multifunction button once to
colours to indicate this. play/pause music.
(2) Open Bluetooth on your device and search for (4) Volume up: Tap the volume “+” button in steps to
“Rockerz 255 Pro+” in the list of available devices. increase the volume. A prompt will indicate maximum
(3) Choose “Rockerz 255 Pro+” from the list and enter volume.
Product Diagram
the pairing password “0000” to establish Bluetooth (5) Volume down: Tap the volume “-“ button in steps to
connectivity. decrease the volume. A prompt will indicate minimum
(4) Once successfully paired, the LED light will flash volume.
ASAP Fast Charging: (6) Answer/End call: Short Press the multifunction button
1. Rockerz 255 Pro+ supports ASAP fast charge, and when answering or ending a call to complete the action.
can provide up to 10 hours of audio bliss in just 10 (7) Reject call: Press and hold the multifunction button for
minutes of charge. 2 seconds when receiving a call to reject it. A beep will
indicate this.
(8) Previous Track: To go to the previous track, press and
Package contents
To Charge: hold the “-” button for 2 seconds.
1x boAt Rockerz 255 Pro+
Use a Type C charging cable to charge the earphone (9) Next Track: To skip to the next track, press and hold the
1x Type C Cable
through either a laptop or an adaptor. “+” button for 2 seconds.
2x pairs of additional earmuffs (Small & Large)
(1) Low Battery: The remaining talk time is less than 10 (10) Voice Assistant: Press the multifunction button for 1.5
User manual
minutes. There will be a ‘tone’ and a reminder every seconds to activate Siri/ Google Assistant.
minute.
(2) Charging: The red light is steady (please note that Fun
ction Bu
tt
t-i-
the earphone cannot be turn on when charging).

on
-l
- -u
anHto- l-d-M

for 1 sec to
.5
sntd
ssai
Ac
tivat oicPereAs
eV
Pro+

Charging norms & Precautionary Guidelines: - Specifications


1) Charger/Brick/Adapter : 5V 2A Bluetooth Version V5.0
2) Cable/Wire: Standard Cable (35 strands @0.10mm
Chipset: Qualcomm Chipset
diameter/ strand)
2.4G frequency range 2.402-2.480GHz Pro+

Any other accessory can be paired up with the Frequency: 20Hz~20000Hz


product as long as the specifications are as per above Bluetooth profiles: HSP, HFP, A2DP and AVRCP
Safety Cautions:
Operating distance: 10 meters Class II
• Please don’t dismantle the product in any way or
remove the product’s battery by yourself, as this can Codec: AAC/SBC/AptX
lead to a fire or electrical breakdown. Any Noise isolation cVc
maintenance or servicing of the earphones should be Battery: 300mAH
done only through a qualified service provider/manu-
Talk time: Up to 40 Hours
facturer.
Music time: Up to 40 Hours
• Please clean the earphones with the utmost of care Charging Interface: Type C
with only a damp soft cloth, if cleaning is required. Standby time(power on): 100 hours
Please do not use any oily volatile liquid. In addition,
ensure that the earphones are kept away from Charging Time : 1.5 hours
extremely hot or cold substances. ASAP Fast Charge: 10 Mins = 10 Hours
Driver size dia. 10 mm
• Any damage to the earphones that is NOT a
BY !
EL ION
Driver Impedence 16Ω
manufacturing issue will make the products warranty
null and void. Mic sensitivity -42dB±3dB E D S

S
NE

FU
HO

S
DP
Weight: 32 g SH
EA

PA
S
• Do not use earphones when it is unsafe to be ELE
Material Aluminum shell WIR
wearing them, such as while operating a vehicle, OF
OL
Waterproof IPX7 MB
SY
crossing a street, or during any activity where full ED
FIN
awareness of your surroundings is required. DE
RE

You might also like