Professional Documents
Culture Documents
ENVIRONMENTAL SOLUTIONS
A Schlumberger Company
CD 518 HV VFD
High Volume - Performance Centrifuge
Global drilling projects where The CD 518 HV VFD (High Volume, High Volume:
the best efficient fluids/solids Variable frequency Drive) over- Process up to 415 gpm (greater
separation is required. CD518 comes the problem of the CD 518 than two CD 518 STD com-
HV VFD is also designed for bar- HV that can’t vary the velocity dur- bined)
ite recovery and dewatering. ing the operation changing the Higher solids removal efficiency
supply motors frequencies. It dif- than CD 518 STD
PROBLEMS fers from the fix drive model only Lower cut point than CD 518
for the absence of the control STD
Big volume to process, strong panel being the electric circuits High Bowl Speed:
environmental conditions and placed inside the VFD module. This Up to 3200 rpm
best solids removal or barite centrifuge develops greater per- High force G:
recovery. formance than two standard units Up to 1975g at 3200rpm
combined since it increases proc- High Sigma Value:
SOLUTIONS essing capacity and refines solids Up to 2302m2 at 3200rpm
separation. Respect to the prece- Speed scroll:
M-I SWACO CD518 HV VFD has dent version (CD 518 STD) this Differential regulation from 1
to be your choose in order to centrifuge is leaded by two bigger to 80rpm
assist at best drilling operations motors and the conveyor design is Variable feed flow to improve
in a unique footprint unit. improved in order to facilitate the solids control efficiency
motion of the increased mud flow Higher barite recovery than
(from radial configuration to quasi conventional centrifuge
ECONOMICS Higher torque resistance than
axial flow).
The solids removal efficiency is conventional centrifuge
By producing drier solids CD 518 CD 518 HV VFD respects all the
HV VFD reduce the cuttings vol- guaranteed by a VFD (Variable
Frequency Drive) module and rules both onshore and off-
ume decreasing the total shore
amount of waste and the associ- speeds adjustments are feasible
for bowl, differential and feed Low production time
ated costs. In addition an effi- 24/7 technical assistance
cient separation minimize the pump. A PLC (Programmable Logic
loss of the expensive mud fluid. Controller) provides the command
of the process both in automatic
or manual mode in addition at the
ENVIROMENTALS control of all the working parame-
ters (temperature, speed, current,
An efficient separation is not vibration...).
only better under an economical
point of view but it is preferable
for the environmental preserva-
tion too.
A Schlumberger Company
CD 518 HV VFD
High Volume - Performance Centrifuge
Physical Data
Overall Dimension and Weight
Nozzle Schedule
A Schlumberger Company
CD 518 HV VFD
High Volume - Performance Centrifuge
Physical Data
Centrifuge
A Schlumberger Company
CD 518 HV VFD
High Volume - Performance Centrifuge
Safety Features
Torque limiter with torque limiter switch in the back drive to protect the gearbox sun-wheel shaft.
Vibration sensor to stop the machine in case of high vibration.
Micro-switch on guards (main, back drive and vessel) to avoid centrifuge start up while servicing.
Certifications
Higher Temperature shall be met ( submitted by a specific assessment) and it must be specified on the
purchase order (which must be managed as a “special order”).
Control System
The unit is controlled and monitored through a VFD (Variable Frequency Drive) module that can be
moved to remote location for remote controls. Alarms and maintenance screen will appear automatically.
A Schlumberger Company
CD 518 HV VFD
High Volume - Performance Centrifuge
A Schlumberger Company