Professional Documents
Culture Documents
• Industrial softening
Standard Design Conditions • Demineralisation and polishing when used
in combination with ResinexTM A-4
Bed depth >700 mm
Service flow rate 8-40 l/h/l
Backwash expansion 50-75% Standard Packaging
ºF)
F)
ºF)
F)
8º
100 100
(50
6°
(40
(6
)
°F
(8
ºC
ºC
(40
5ºC
F)
ºC
20
10
0°
F)
Pressure Drop, kPa/m
30
C
Bed Expansion, %
80 ) 80
(6
ºC
°F
ºC 86
10
20 ºC ( 3
30 F)
60 4° 60
(10
ºC
40
2
40 40
1
20 20
0 0 0
0 20 40 60 80 100 0 10 20 30 40 50
Flow Rate, m/h Flow Rate, m/h
Standard Regeneration Parameters for Softening Standard Regeneration Parameters for Demineralisation
Product Packaging
N O T I C E Jacobi Carbons reserves the right to change product specifications without prior notification. The information contained in this datasheet is intended to assist a customer in the evaluation and selection of products supplied by Jacobi Carbons.
abcdef
The customer is responsible for determining whether products and the information contained in this document are appropriate for the customer’s use. Jacobi Carbons assumes no obligation or liability for the usage of the information in this datasheet, no
guarantees or warranties, expressed or implied, are provided. Jacobi Carbons disclaims responsibility and the user must accept full responsibility for performance of systems based on this data.
C A U T I O N Strong oxidizing agents such as nitric acid can react violently with ion exchange resins and cause explosive type reactions. Before using strong oxidants, consult sources knowledgeable in the handling of these materials.
Lenntech
RX-K8-F-EN