INSTRUCTIONS FOR ORDERING REPAIR PARTS
‘When ordering parts, specify MODEL (18 Character), Size
and Serial Number (See name plate on compressor). Serial
Number is also stamped on drive end of crankcase.
All orders for Parts should be placed with the nearest Sales,
and Service Office.
Reference numbers shown in the left hand column of the
Pants Lists are used to help locate the parts shown on the
Drawing and Sectional Views. DO NOT ORDER BY
REFERENCE NUMBERS.
After locating the reference number, the part number may be
found for your particular unit under the correct Model
Number column,
Specify exactly the number of parts required (sce column
“Quy. Req, Per Unit"). DO NOT ORDER BY SETS.
To determine the Right Hand and Left Hand side of the
unit, stand at the drive end of the crankshaft and face the
PARTS RETURNED
All claims must be made within five days after receipt of
goods. If order has been filled correclly, we cannot allow
INDEX
Base Mounted Compressor Units 14,15
Cylinder, Head, Piston & Rod, HP 6
Cylinder, Head, Piston & Rod, LP 5
Discharge Vale, HP 10
Discharge Valve, LP 8
Gasket Kit u
Intercooler... 12
Mini Matrix — Bare Units
Mini Matrix — Package Units pci
141-527
the return of the goods without our consent and then only.
fon a basis of a charge for service and rehandling plus
twansportation charges,
Transportation charges must be prepaid. IF ic is necessary to
return a part to the factory for duplication or inspection, do.
not fail to do the following.
1, Write the nearest Sales and Service Office a lewer ad-
vising what material you wish to return and why.
2 After receiving permission to return the item of items,
‘obtain from the Sales and Service Office the correct
forms filled out by that office for the proper return of
material
8. Place a tag in the package showing your name and
address
4. Tag each article in the box or package stating what and.
how many are returned,
5. Always give the serial number of the machine from
which the parts were removed or the invoice number
‘on which the parts were originally shipped.
All pares returned for credit should be handled in the same
‘manner as that for duplication or inspection,
Oil Pump 4
Ordering Instructions : 1
Piston Ring Arrangement u
Power End 8
Suction Unloading Valve, HP 9
Suction Unloading Valve, LP 7
Tank Mounted Compressor Units .....+ 16,17
Unloader Piping :
Valves 7 thew 10
Page 1
a8MINE-MATRIX FOR
VERTICAL AIR-COOLED BARE COMPRESSOR
AVS
THIRTEEN CHARACTER MODEL DESIGNATIONS
NOTICE TO CUSTOMER
} Options for your compressor unit, FILL THE BALANCE OF
4 LETTERS FROM YOUR COMPRESSOR NAME PLATE. BAaVE
COLUMN NUMBER: 1 2
|
* COLUMN 6 — ENGINEERING SPECIFICATIONS ———
To find the ‘construction
ole
[
| FOLLOW THE LINE DOWN AND OVER FROM EACH LETTER
| TRUS FILED IN TO FIND THE APPROPRIATE CONSTRUCTION
4) Grttow arr rivet WOUR MACHINE Ts EQUIPPED, Tat
RUMBER WS" IN ANY COLUMN SPACE INDICATES “NOT
APPLICABLE”. THE NUMBER "f" IN ANY COLUMN SPACE,
INDICATES SPECIAL DESIGN — REFER TO FACTORY ORDER
Ticket .
COLUMNS 1, 2, & $ — COMPRESSOR TYPE & SIZE
COLUMN 4 — TYPE OF CONSTRUCTION —
‘A. Compressor With Suction Unloading Valves
COLUMN. 5 — COMPRESSOR SIZE
R 625 & 35x4
COLUMN 7 — SPECIFIC BARE SELECTIVE
"A. CompressoF With Suction Unloading Valves
“COLUMN 8 — AIR FILTER SELECTIVE —
‘A. Standard — AirMaze Oil Wetted Screen Type
<
“COLUMN. 9 — SHEAVE SELECTIVE —
x G. 2 —*C" Section 19.25 P.D., Clockwise Rotation
{ “COLUMN 10 — CONTROL SELECTIVE
A. Standard Automatic Starv/Stop
® COLUMN 11 — NO SELECTIVES
COLUMN 12 — NO SELECTIVES
COLUMN 18 — OPTIONAL EQUIPMENT SELECTIVE
9, Not Applicable
8. Special — Refer to Factory Order Ticket
For Base or Tank-Mounted Units see Mini Matrix on page 1.ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
Ref = Qy. Req. Model
No. Name of Par a er Unit AVSAR
POWER END Part No.
1 CRANKCASE ».» 1 zooavso1s.
2 SHEAVE * (0.2 PD — 2-6 Section) 1 SADRI9~
3 CRANKSHAFT at 1 200AVS004
4 KEY-SQUARE. 1 SSB381
5 SET SCREW-Sotid 4 76F45
6 NUT-CRANKSHAFT. 1 VABS81
7 SEAL-OIL 1 coc2s
8 BEARING-ROLLER 2 12629
9 SHIMSET CUP 1 77822
10 SCREW-HEX CAP 6 75A18N
u HOUSING- BEARING 1 2005006
2 GASKET-RING 1 25c1997
8 asker 2 250627
4 PLATE-INSPECTION (Plain) 1 AALS
re SCREW-HEX CAP. 2 754130
6 PLUG-SqHtd PIPE 2 HAAS
0 PLATE-INSPECTION (Oil Gauge) 1 AALS
18 ROD-OIL LEVEL 1 ncR5s7
0 FLANGE 1 22AUX27
20 SCREW-HEX CAP 2 T5AAL
a1 GASKET- ELLIPTICAL 1 250626,
2 BREATHER : 1 58
23 CLAMP 1 ADS54
a SCREW-MIACHINE 1 75024
2% WASHER-LOCK 1 95513
26 NUT-HEX MACHINE 1 50K
2 BODY-OIL FILLER 1 ADs82
2» SCREW-HEX CAP 2 T5AAL
2 GASKET-ELLIPTICAL 1 250626
30 SCREW-HEX CAP 5 T5AI8N
* For other sheave sizes consult your nearest Sales and Service Office.
11-527 Page 8
ea rtORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
-
76527
Ref yy. Req. Model
No. Name of Part Per Unit AVSAR
‘omL PUMP Part No.
PUMP-OIL, Incl. Ref, No. 2 thru 5 1 2012919
COVER .. ate 1 2010243,
PUMP 1 2010242
PLUNGER 1 2010244
SPRING 1 2010285
SHIM SET ie 1 7684
SCREW-HEX CAP (1/4 x 1-1/2) «0000+ 6 75A51
FITTING-LUB ah 1 40840
GAUGE: PRESSURE, 1 2009741
PIN-SPRING ROLL 1 ears
ELBOW-TUBE 1 86453
TUBE 1 203AVS857
ELBOW-TUBE - 1 86M90
SCREEN- OIL 1 200ADD019
11-527
Page 4ORDER BY PART NUMBER AND DESCRIPTION, REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
, 15 PIN, Piston 1 62F23
Pistons and Piston Rings also available in O15" and .080" oversize. For Piston Ring.
Arrangement see page 11
‘Also available in .080" undersize only, part number 201ACRI74
$527 Page 5 &
——oSS—=—‘ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
c7sni2x
Ref Qy. Req Model
No. Name of Part AVSAR
: HP CYLINDER, HEAD, PISTON & CONNECTING ROD Part No.
1 CYLINDER P 1 ADR?
2 GASKET, Cylinder to Crankcase 1 250619 ¢
3 SCREW, Cylinder w Head 5 75A12
‘ GASKET, Cylinder to Head 1 251189
5 HEAD-CYLINDER 1 ADR?
6 SCREW, Valve Cover - 6 75A17
7 PLUG-SqHd PIPE i 1 GEAAS
8 FLANGE, Discharge 1 ABLTS
9 GASKET, Discharge Flange 1 250628
10 SCREW, Discharge Flange 4 75439
n PISTON-AIR, Incl. Ref. No. 12* 1 ABRIS
2 BUSHING 2 12s
13 RING-PISTON, Compression * * Gene tes
4 RING-PISTON, Oil Control * 1 653
5 PIN, Piston . 1 ara
16 ASM CONNECTING ROD; Inc.-Ref, No. 17 thru 22 1 200 VS0058
W7 ASM CONNECTING ROD BOLT, With Nuts 2 2007528
8 BEARING (Upper Half) 1 200ACRI74
a 19 BEARING (Lower Hal 1 200AGRI74 °*
20 LOCKNUT i 8 2 5M
2 SCREW ... 1 VAB655
22 WIRE... z é +12 inches 97A29
* Pistons and Piston Rings also available in .015" and .030” oversize. For Pision Ring
Arrangement see page’T!
++ Also available in .080" undersize only, part number 201ACRI74 q€73980) ‘
Ref Qty: Req. Model
No. me of Part Pet Comp. _AVSAR
LP SUCTION UNLOADING VALVE Part No.
SUCTION UNLOADING VALVE GROUP, Incl, Ref. No. 1 thru 24 1 VBAzI64AB
ASM SUCTION VALVE, Incl. Ref. No. 1 thru 9 ie VBs2161Ca ar 290 2
4 ASM BUMPER) 1 VBA21644
2 PLATE-DAMPENING. 1
8 ASM LIFT GUIDE 1
“4 SCREW 1 75K80
“5 ASM_VALVE. SPRING 8 +
16 DISC-VALVE 1 ivneny
7 GASKET 1
8 SEAT-SUCTION VALVE 1 va2202
° NUT 1 Vous
PLUNGER UNLOADER 1 1vBi2217
SCREW 1 75LM7
SEAL-PLUNGER 1 60DDs
RETAINER-SEAL 1 v706
GASKET 3 25FI5.
15 SET SCREW 3 76669
6 NUT i 50Q)8
7 COVER-SUCTION UNLOADING VALVE 1 svB2iss
18 SCREW 4 75A29
19 GASKET. 1 25R27
20 PIN-FINGER 4 pais
21 SPRING 4 78AS04
22 CLAMP-SUCTION VALVE 1 ovBaziog
23 SCREW 2 75AS4
4 WASHER-LOCK 2 95H2 »
141-527 Page 7ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
lo
3
8
7,
6
5
4
3
i
c7s074 t
Ref. Qy. Req. Model
No. Name of Part Per Comp. _ AVSAR
* LP DISCHARGE VALVE , Part No.
ASM DISCHARGE VALVE, Incl. Ref, No. I thru 9 vB122028 Mee?
1
1 SEAT 1 ‘vBa2202
2 GASKET t 2516
3< _DISC-VALVE 1 1VB4267
4” PLATE-DAMPENING 1 svB42214
5% ASM VALVE SPRING 6 2VA105A
6 ‘ASM BUMPER 1 VB421644,
7 ASM LIFT GUIDE . 1 ‘vB260
8 SCREW 1 75K81
9 NUT .. 1 vBuis
10 CLAMP-DISCHARGE VALVE 1 ev42452
n SET SCREW 3 766615
12 GASKET 8 25F15
13 NUT 3 50Q18
4 SCREW 4 75A17 53
15 COVER-VALVE 1 2VBA2185
16 GASKET. 1 25R27