Professional Documents
Culture Documents
SikaHyflex®-220 Window
SEALANT ENSURES TIGHT PERIMETER JOINTS OF WINDOWS AND DOORS
THE FAST AND EASY TO USE
PERIMETER SEALANT
Windows are a key element of current building envelopes. SikaHyflex®-220 Window is a 1-part, moisture curing, elastic
With significantly enhanced insulation values of today’s in- joint sealant suitable for perimeter joints of:
sulating glass units and frames window installation becomes ́́ Windows
more important as well. A proper installation of windows and ́́ Doors
doors ensures tight connections to adjacent building elements ́́ Building service installations
and thus helps to meet the requirements for sustainable ́́ Fittings
building and enhances the insulation of the entire facade. ́́ Other installations
Sealants must provide good adhesion to different construc-
tion materials (porous and non-porous) and should be over APPROVALS & STANDARDS
paintable. Especially for outdoor application also very good ́́ EN 15651-1, cIass 25 LM
weathering resistance is a must. SikaHyflex®-220 Window ́́ ISO 11600 F 25 LM
fulfills all these requirements and is additionally very easy to ́́ EMICODE EC1PLUS R, very low emissions
apply. ́́ Passes LEED EQc 4.1
© 2012 Hardturm AG, Zürich und Halter AG, Zürich
SEALING
2 SikaHyflex-220 Window
SikaHyflex®-220 Window is an advanced silane-terminated polymer sealant, based on Sika’s AT technology that allows the
formulation of best sealants in class.
BEST APPLICATION PROPERTIES BEST PROPERTIES FOR JOINT DESIGN BEST PROPERTIES
FOR LONG LASTING JOINTS
Product Information
Packaging 290 ml PE cartridge, 12 cartridges per box / 600 ml foil pack, 20 foil packs per box
Shelf life 12 months (storage between +5°C and +25°C)
Colours White, concrete grey, middle grey, dark grey, grey 5057, anthrazite, beige, brown, black, other colors on request
Sag flow 0 mm (ISO 7390)
Movement capability ±25% (ISO 9047)
Elongation at break 600% (ISO 37)
Application temperature +5° and +40 °C
Surface Preparation Sika® Aktivator-205 for powder coatings and metals, e.g. aluminium, steel. (Flash-off time: min. 15 minutes)
Sika® Primer-3 N for porous substrates, e.g. concrete, mortar, masonry, plaster. (Flash-off time: min. 30 minutes)
Primers are adhesion promoters only. They are not substitutes for cleaning the surface nor can they improve
the strength of the substrate significantly. For further information see Pre-treatment chart Sealing & Bonding.
For good quality and clean substrates, even on PVC, no primer is needed.
SEALING
SikaHyflex-220 Window 3
ALSO AVAILABLE
FROM SIKA
WHO WE ARE
Sika AG, Switzerland, is a globally active specialty chemicals company.
Sika supplies the building and construction industry as well as manu-
facturing industries (automotive, bus, truck, rail, solar and wind power
plants, façades). Sika is a leader in processing materials used in sealing,
bonding, damping, reinforcing and protecting loadbearing structures.
Sika’s product lines feature highquality concrete admixtures, specialty
mortars, sealants and adhesives, damping and reinforcing materials,
structural strengthening systems, industrial flooring as well as roofing
and waterproofing systems.
© Sika Services AG / Sealing & Bonding/ CMS / SikaHyflex-220 Window / 09.2013 / 659 / ID:42110