AutoCAD Technical Training Fundamentals and Intermediate
DESIGNING ROOF AND GUTTER
Now. you need to add roof to the house.
1, Format menu > Layer
New @ Type: Roaf
Color + Green ELEVATION
Linetipe Continuous
Click Current button
2. View menu + Viewports + Ne
Viewparts... 7 3 Right
wemenu + 3D Views # Plan / SE
Isometric | Front
4. Draw the Roof Plan, use Command: Pline
iots6. 8. Use GRIP 1 connect the endpoint af the
let
|
clevated ridge line. |
3575.
a
9150
2000 |
3575
5. Command: RAV hay a finite senting |
point and extends to infinity. Use TRIM | |
to cut the extended Ray |
| 9 With Front viewport current
| ommand: TRIM
| Select cutting edges: see figure
| Select ebiocine P.
| Enter a projection eption| View |: V-
| Select object to trim) Edge}: £.
Enter an implied edge extension mode
6. Command: EXTRUDE | (Extend/No extend] : Bs
Select Object: click Select object to trim: see figure
Height: -250 (downward height)
Taper Angle: 0 |
7. Command: CHANGE (the ridge)
MagnaGAD Technologies Schoo! Inc. 79AutoCAD Technical Training
CUTTING
EDcE
OBJECT To TRIM
10, With SE dsametric viewsport curreit
Command: UES
Enter an option: 3.1
New origin point: Atways at lower left corner
Point on positive postion of Neasis: Pick the
right end
Point on positive-Y’ portion
plane: Pick the upward end
Los Ny
Posinve
XAKIS
HL Conamand: PL or PLINE
Specily start point: pick 1
Specify nest point: pick 2
Speci neat point: pick 2
Specify nest point: C.
12. Create New Layer: Roof Hate. Color: Red
Command: BH or BATCH
Pattern: Plasti
Angle: 90
Scale: 100
Pick Points: Select internal point
Preview
Press ESC
Click OK
|
Fundamentals and Intermediate
INTERNAL
gow |
15. Repeat Step 10/10 12 forthe other roo
surfize, they are UCS. PLINE, BHAT CH
14. Command: EXTRUDE
Select ubject: select the entire wat
eight: 1.2 (novide Pline thickness)
Taper angle a.
5. Move the eutire roof abose the wall
Commnan: CC. 18
i
/Command:Mo\
[the root
Create New Layer: Gutter. Color: Red.
Draw the Gutter profile object
Autodesk Authorized Training Center
|
16, With Front viewport current |
|
|
80AutoCAD Technical Training
200
Make sure to use Command: PEDIT wo
join all the segments,
\
\Luove tHe prorne
HERE AT WIDPOINT
17, Draw the extrusion path, use Command: Pline
or Drave menu 3D Palyline
18. Command: EXT or EXTRUDE
Select objects: select the profite
Specify height of extrusion or [Path]: P1
Select extrusion path: select the path
Title
|. File > New > Start From Seratch » Metric
2. Format menu > Layer or Command: LA
New = type: TBLOCK. Color White, Current
Command: MVSETUP.1
Enter the seate factor: 1-1
Paper width: 762.1. Paper height: 508.)
4. Draw the Title Block, follow the illustration,
=19 Zoom Window closer to the
Block
6
Ti
Fundamentals and Intermediate
Select the
Path
the pute
You notice that ummecessary lines appears
fier yu use Command, HIDE
UNNECESSARY LINES APPEARS
WHEN USING COMMAND: HIDE
In order t0 controls display of sithoueite
curves of solid objeety in Wirettame mode
Also controls whether mesh is denen ot
Suppressed when ject is Hidden, 9
Imtis use the
Comin DESPSILIL
Enter new sally for DISPSILLL 7
Command: HIDE.
When done. return to Floor 2
Window menu).
Use dnsert Block or Lo place the Vitle
Block
Insertion Point: Pick, X-Seale Factor: $0
Seale Factor: press «Rotation Angle: oJ
Hh (lich,
MagnaCAD Technologies School Ine
a