Professional Documents
Culture Documents
You can create a connection that allows you to import data from SAP
S/4HANA Cloud Edition or On-Premise exposed OData V2
services.
Prerequisites
To connect to SAP S/4HANA On-Premise OData services, you must do the
following:
Note
The cloud connector is not
required for a connection to SAP S/4HANA Cloud
Edition.
1. The cloud connector is installed. For more information, see Installing the SAPCP Cloud Connector.
2. The cloud connector is configured. For more information, see Configuring the SAPCP Cloud Connector.
Protocol: Select
HTTPS.
Develop and enable OData service through the SAP Gateway. Please refer to the following
documents:
Note
If you encounter issues configuring the SAP Gateway,
see SAP Note 1797736 (SAP Gateway Troubleshooting
Guide)
for possible solutions.
Context
An import data connection allows you to bring data from your
SAP S/4HANA system into SAP Analytics Cloud. For additional
integration information and detailed configuration steps, see Integration of SAP Analytics Cloud for Planning with SAP S/4HANA.
Note
To export data back to SAP S/4HANA Cloud, see Exporting Data to SAP S/4HANA.
Procedure
1. From the side navigation, choose
Connections (Add
Connection) .
Note
Only the server address and port are required for both SAP S/4HANA Cloud and SAP
S/4HANA On-Premise. For
example, https://<S/4HANA
SERVER> for SAP S/4HANA Cloud or
https://<S/4HANA SERVER:PORT> for SAP
S/4HANA
On-Premise.
For SAP S/4HANA Cloud, SAP Analytics Cloud will connect to https://<S/4HANA SERVER
>/sap/opu/odata/IWFND/CATALOGSERVICE;v=2/, if
the gateway service is enabled. Otherwise, it will connect
to
https://<S/4HANA SERVER
>sap/opu/odata/sap/API_CA_ODATA_CATALOG_SRV/. To
verify that the page can
be loaded in the browser without error,
please load the page with your credentials from the browser.
For SAP S/4HANA On-Premise, SAP Analytics Cloud will connect to https://<S/4HANA
SERVER:PORT>/sap/opu/odata/IWFND/CATALOGSERVICE;v=2/.
To verify that the page can be loaded in the
browser without
error, please load the page with your credentials from the
browser.
Depending
on how your on-premise system is set up, you might need to add
?sap-client=<client-number> to
the end
of the URL when creating a connection to route to the OData
client. If the OData client is the default one,
then the
connection will be created successfully without specifying the
client number. Otherwise, you'll need to
specify the client
number.
Note
If you want to share the credential details, select the option
Share these credentials when sharing this
connection. Otherwise, users will need to enter
their own credentials in order to use the connection. If you don't
share your credentials, users will be able to edit their credentials
at any time without having to start a data
acquisition
process.
4. Choose Create.
5. If you want to create a model based on this connection, see Importing Data.