You are on page 1of 110

CENTRAL RAILWAY

ZONAL RAILWAY TRAINING INSTITUTE


BHUSAWAL

ENGINEERING (WORKS) Question Bank (Spell 1 & 2)


ZRTI Bhusawal

Questions (Spell 1)
Paper-1
Objectives
Plantation and horticulture
Sr. No. Question Answer
1 The frequency for hedge cutting should be?
A) once in a month
B) once in two month
C) once in three month
D) once in every forth night Once in two
month/
हेज किटग की आवृि ा होनी चािहए। दो महीने म एक बार
A) महीने म एक बार
B) दो महीने म एक बार
C) तीन महीने म एक बार
D) हर अगली रात म एक बार
2 Watering to hedge should be provided?
A) once in a week
B) once in a week till fully grown once in a week till
C) once in a week till fully grown than once in two month fully grown than
D) once in every forth night once in two
months/
बचाव के िलए पानी देना कब दान िकया जाना चािहए। एक स ाह म एक
A) स ाह म एक बार बार दो महीने म एक
B) स ाह म एक बार पूरी तरह से िवकिसत होने तक बार पूरी तरह से
C) एक स ाह म एक बार दो महीने म एक बार पूरी तरह से िवकिसत होने तक िवकिसत होने तक
D) हर अगली रात म एक बार

3 Provision of lawn and hedge for officer's bungalow should be


A) 200 sqm. & 200m
B) 100 sqm. & 200m
C) 200 sqm. & 75m
D) 100 sqm. & 75m 200 sqm. & 200m
/200 वगमीटर और
अिधकारी के बंगले के िलए लॉन और हेज का ावधान मशः ा होता है? 200 मी
A) 200 वगमीटर। और 200 मी
B) 100 वगमीटर। और 200 मी
C) 200 वगमीटर। और 75 मी
D) 100 वगमीटर। और 75 मी
4 Provision of lawn and hedge for type-IV should be?
A) 200 sqm. & 200m 75 Sqm and 100
B) 100 sqm. & 200m mts
C) 200 sqm. & 75m

Engineering (Works) Question Bank 2020 Page 1


ZRTI Bhusawal

D) 100 sqm. & 75m

टाइप- IV के िलए लॉन और हेज का ावधान मशः ा होता है ?


A) 200 वगमीटर। और 200 मी
B) 100 वगमीटर। और 200 मी
C) 200 वगमीटर। और 75 मी
D) 100 वगमीटर। और 75 मी
5 The fixing of reserve price of lots to be sold by auction should be fixed by
divisional engineer in whose consultation?
A) FA&CAO
B) DEN
C) Sr. DEN
D) Accounts officer
Accounts officer/
नीलामी ारा बेचे जाने वाले ब त से आरि त मू य का िनधारण भागीय अिभयंता लेखा अिधकारी
ारा िकस के परामश से िकया जाना चािहए?
A) एफए और सीएओ
B) डी.ई.एन.
C) सीिनयर डी.ई.एन.
D) लेखा अिधकारी
6 Normal size of pit for plantation should be what as per area wise as well as
how much deep it should be?
A) 0.5 Sqm and .5mts
B) 0.5 Sqm and 1mts
C) 0.75 Sqm and 1mts
D) 0.75 Sqm and .5mts 0.5 Sqm and
1mts/
रोपण के िलए ग े का सामा य आकार का घन व िकतना और गहराई िकतनी होना 0.5 वगमीटर और
चािहए। 1mts
A) 0.5 वगमीटर और .5 मी
B) 0.5 वगमीटर और 1 मी
C) 0.75 वगमीटर और 1 मी
D) 0.75 वगमीटर और .5 मी
7 Licensing of borrow pit tanks for pisi-culture can be done for a period of?
A) 1 to 5 years
B) 2 to 5 years
C) 3 to 5 years
D) 4 to 5 years
1 to 5 years
िकतनी अविध के िलए िपसक चर के िलए उधार िपट टक का लाइसस िदया जा सकता
है।
A) 1 to 5 years
B) 2 to 5 years
C) 3 to 5 years
D) 4 to 5 years
8 Steps to clear the obstruction from private land are laid down in which act
section 14 of
A) section 11 of Indian railway act 1989
Indian railway act
B) section 12 of Indian railway act 1989
1989
C) section 13 of Indian railway act 1989

Engineering (Works) Question Bank 2020 Page 2


ZRTI Bhusawal

D) section 14 of Indian railway act 1989

िनजी भूिम से अवरोध हटाने के कदम िकस म िदये गए ह।


A) section 11 of Indian railway act 1989
B) section 12 of Indian railway act 1989
C) section 13 of Indian railway act 1989
D) section 14 of Indian railway act 1989
9 Consolidated information regarding the afforestation in railway land to be
sent to railway board by ?
A) 30th April of every year.
B) 30th May of every year.
C) 30th June of every year.
D) 30th July of every year.
30th April of
रेलवे भूिम म वनीकरण के संबध
ं म समेिकत जानकारी रेलवे बोड को िकस तारीख तक every years
भेजी जानी चािहए।
A) हर साल 30 अ ल ै ।
B) हर साल 30 मई।
C) हर साल 30 जून।
D) हर साल 30 जुलाई।
10. Lawns mowing schedule
A) Once a fortnight
B) Once a week
C) Once a once a fortnight and once a week in summer
D) Once a month
Once a month/
लॉन की छंटाई का शे ल ू या होता है ? महीने म एक बार
A) एक बार एक पखवाड़े
B) स ाह म एक बार
C) एक पखवाड़े और स ाह म एक बार गिमय म
D) महीने म एक बार
11. Lawns watering schedule
A) Once a fortnight
B) Once a week
C) Once a once a fortnight and once a week in summer Once a fortnight
D) Once a month and once a week
in summer/
लॉन का पानी शे ल ू करना या होता है ? गिमय म एक बार
A) एक बार एक पखवाड़े एक पखवाड़े और
B) स ाह म एक बार स ाह म एक बार
C) गिमय म एक बार एक पखवाड़े और स ाह म एक बार
D) महीने म एक बार
12. Lawns weeding
A) Once a fortnight
B) Once a week Once a month/
C) Once a once a fortnight and once a week in summer महीने म एक बार
D) Once a month

Engineering (Works) Question Bank 2020 Page 3


ZRTI Bhusawal

लॉन िनराई कब िक जाती है।


A) एक बार एक पखवाड़े
B) स ाह म एक बार
C) गिमय म एक बार एक पखवाड़े और स ाह म एक बार
D) महीने म एक बार

Acquisition Management and Disposal of land


The law regarding acquisition of land is embodied in.
A) Land acquisition act of 1894.
B) Land acquisition act of 1984.
C) Land acquisition act of 1948.
D) Land acquisition act of 1989.
Land acquisition
13 भूिम के अिध हण से संबंिधत कानून िकसम सि िहत है। act of 1894
A) 1894 का भूिम अिध हण अिधिनयम।
B) 1884 का भूिम अिध हण अिधिनयम।.
C) 1948 का भूिम अिध हण अिधिनयम।
D) 1989 का भूिम अिध हण अिधिनयम।
Relinquishment of railway land should be as per
A) Indian railway code of engg dept.
B) Indian railway P-WAY manual.
C) Indian railway works manual
D) Indian railway Bridge manual. Indian railway
code of engg
14
रेलवे की भूिम का रकबा िकस के अनुसार होना चािहए। dept.
A) Indian railway code of engg dept.
B) Indian railway P-WAY manual.
C) Indian railway works manual
D) Indian railway Bridge manual.
The contingency charges in all relinquishment estimates should be
A) 1%
B) 2%
C) 3%
D) 4%

सभी अनुमान अनुमान म आकि मक शु क िकतना होना चािहए। 1%


15 A) 1%
B) 2%
C) 3%
D) 4%

Annual license fee for commercial plots for city booking agencies, out
agencies etc. should be
16 A) 5%
B) 6%
6%
C) 7%
D) 8%

Engineering (Works) Question Bank 2020 Page 4


ZRTI Bhusawal

शहर की बुिकग एजिसय , आउट एजिसय आिद के िलए वािणि यक भूखंड के िलए
वािषक लाइसस शु क िकतना होना चािहए।
A) 5%
B) 6%
C) 7%
D) 8%
Licensing and leasing of railway land to other govt. dept. should be
A) 5% of market value
B) 6% of market value
C) 7% of market value
D) 8% of market value
6% of market
अ य सरकारी िवभाग को रेलवे की जमीन का लाइसस और प े िकतना की % दर पर value/
17 देना चािहए। 6% बाजारी मू य
A) 5% of बाजारी मू य
B) 6% of बाजारी मू य
C) 7% of बाजारी मू य
D) 8% of बाजारी मू य

Preparation of plans
Drawing and documents which are capable of being reproduced is known as
A) Engineering scale plan
B) Standard drawing.
C) topo sheet
D) Tracing.

Tracing / ेिसग।
18 ाइं ग और द तावेज जो पुन: पेश िकए जाने म स म ह, उ ह ा कहा जाता है।
A) इं जीिनयिरग के ल लान
B) मानक ाइं ग।
C) टोपो शीट
D) ेिसग।
The sequential sheet number is indicated by
A) n/n
B) p/n
C) n/p
D) p/p
n/p
19
अनु िमक शीट सं या िकस ारा इंिगत की जाती है।
A) n/n
B) p/n
C) n/p
D) p/p
20 If a corrected survey for river does not exist then length of stream to be
surveyed on upstream as well as on downstream respectively.
A) 2 KM & 2Km 8 KM & 2Km/ 8
B) 8 KM & 8Km िक.मी. & 2 िक.मी.
C) 2 KM & 8Km
D) 8 KM & 2Km

Engineering (Works) Question Bank 2020 Page 5


ZRTI Bhusawal

यिद नदी के िलए एक सही सव ण मौजूद नह है, तो नदी के ऊपर ओर िनचले बहाब की
िकतनी दू री तक का सव िकया जाना चािहए।
A) 2 िक.मी. & 2 िक.मी.
B) 8 िक.मी. & 8 िक.मी.
C) 2 िक.मी. & 8 िक.मी.
D) 8 िक.मी. & 2 िक.मी.
Existing work remain should be shown in which line.
A) full line
B) dashed line
C) double line
D) dot line
full line/ पूरी
21 मौजूदा काय शेष को िकस म िदखाया जाना चािहए। लाइन
A) पूरी लाइन
B ) धराशायी लाइन
C) दोहरी लाइन
D) डॉट लाइन
Standard drawing for track and bridges are provided by
A) CCRS Office.
B) General manager offices
C) Railway board
D) RDSO
RDSO / आर. डी.
22 ैक और पुल के िलए मानक ाइं ग िकस के ारा दान की जाती ह। एस. ओ.
A) सी.सी.आर एस ऑिफस
B) जी. एम ऑिफस
C) रे लवे बोड
D) आर. डी. एस. ओ.

Storage and use of Explosive


Blasting operation within how many meters of a running line should
normally be carried out under block protection.
A) 25
B) 45
C) 50
D) 100
100
एक रिनग लाइन के िकतने मीटर के भीतर लाि टग ऑपरे शन को सामा य प से लॉक
23
सुर ा के तहत िकया जाना चािहए।
A) 25
B) 45
C) 50
D) 100

Engineering (Works) Question Bank 2020 Page 6


ZRTI Bhusawal

Track with in how many mts of rock to be blasted should be protected by


covering with old sleepers.
A) 20
B) 40
C) 60
D) 80
60
ै के िकतने मीटर म रॉक को ला ट करने के िलए पुराने लीपर के साथ कवर करके

24
संरि त िकया जाना चािहए।
A) 20
B) 40
C) 60
D) 80
The presence of work inspector is necessary when blasting operation take
place within how many mts from the building.
A) 40
B) 60
C) 80
D) 100
100
िबि डग के िकतने मीटर के भीतर लाि टग ऑपरेशन होने पर काय िनरी क की
25
उपि थित आव यक है।
A) 40
B) 60
C) 80
D) 100
What is the quantity of Dynamite and other similar explosive should destroy
at a time.
A) 2.5 Kg
B) 5.0 Kg
C) 10.0 Kg
D) 7.5 Kg
2.5 Kg /2.5
डायनामाइट और अ य िव फोटक समान एक समय म िव फोटक के िलये िकतनी मा"ा से िकलो ाम
अिधक नह होने चािहए।
26
A) 2.5 िकलो ाम
B) 5.0 िकलो ाम
C) 10.0 िकलो ाम
D) 7.5 िकलो ाम

All blasting, storage and use of explosive should be as per which act?
A) Indian explosive act
B) Indian blasting act
C) Indian explosive storage act Indian explosive
D) Indian explosive and blasting act act/ भारतीय
27
िव फोटक
िव फोटक का सभी लाि टग, भंडारण और उपयोग िकस अिधिनयम के अनुसार होना अिधिनयम
चािहए
A) भारतीय िव फोटक अिधिनयम
B) भारतीय िव फोट अिधिनयम

Engineering (Works) Question Bank 2020 Page 7


ZRTI Bhusawal

C) भारतीय िव फोटक भंडारण अिधिनयम


D) भारतीय िव फोटक और लाि टग अिधिनयम

Police Jurisdiction and Security of Railway materials


The offence in which police is not liable to take action including effecting
arrest without specific order of magistrate are __________.
A) Non Negotiable offence
B) Major penalty
C) Cognizable offence
D) Non Cognizable offence Non Cognizable
offence
28 िव फोटक का सभी लाि टग, भंडारण और उपयोग िकस के अनुसार होना चािहए।
A) भारतीय िव फोटक अिधिनयम
B) भारतीय िव फोट अिधिनयम
C) भारतीय िव फोटक भंडारण अिधिनयम
D) भारतीय िव फोटक और लाि टग अिधिनयम
The offence in which police can effect arrest without specific order of
magistrate are ?
A) Non Negotiable offence
B) Major penalty
C) Cognizable offence
D) Non Cognizable offence
Cognizable
मिज ेट के िविश आदेश के िबना पुिलस िगर तारी कर सकती है वह कौन सा अपराध offence
29 के लाता है?
A) गैर पर ा य अपराध
B) मुख दंड
C) सं ेय अपराध
D) गैर सं ेय अपराध

Duties
When shall the AEN should carry out inspection of each section engineer's
office and stores?
A) Once in 6 months
B) Once in 2 years
C) once in a year
D) Once in a month
30 Once a year
ए.ई.एन येक अनुभाग अिभयंता के कायालय और टोर का िनरी ण कब करे गा।
अ) 6 महीने म एक बार
बी) 2 साल म एक बार
ग) वष म एक बार
घ) महीने म एक बार

Engineering (Works) Question Bank 2020 Page 8


ZRTI Bhusawal

Progress report on passenger amenities works should be sent by


A) AEN to Sr. DEN
B) IOW to AEN
C) IOW to Sr. DEN
D) Sr. DEN to CE

या ी सुिवधा के काय पर गित िरपोट िकस के #ारा िकस को भेजी जानी चािहए। Sr. DEN to CE
31
ए) ए.ई.एन से सीिनयर डी.ई.एन.
B) IOW से ए.ई.एन
ग) IOW से सीिनयर डी.ई.एन.
डी) सीिनयर डेन से सीई
Progress report on works under execution by construction units to be sent
by _______ to ________.
A) CAO/C to GM and PHODs
B) IOW to AEN
C) IOW to Sr. DEN
D) Sr. DEN to CE
CAO/C to GM and
PHODs
िनमाण इकाइय ारा िन पादन के तहत काय पर गित िरपोट _______ ारा
32
________ को भेजी जानी है।
A) CAO/C to GM and PHODs
B) IOW to AEN
C) IOW to Sr. DEN
D) Sr. DEN to CE
The SSE (Works) shall examine all tools and plants with artisans in _______.
A) Once in 6 months
B) Once in 2 years
C) once in a year
D) Once in a month Once a month /
33 SSE (व स) कारीगर के साथ सभी उपकरण और मशीनो की जांच कब करे गा । महीने म एक बार
A) 6 महीने म एक बार
B) 2 साल म एक बार
C) साल म एक बार
D) महीने म एक बार
Service Books for group “d” staff should be prepared by the by whom on the
prescribed form.
A) Sr. DEN(CO)
B) AEN
C) SSE(Works)
D) Chief OS

समूह "घ" कमचािरय के िलए सेवा पु तक िनधािरत प पर िकसके ारा तैयार की SSE(Works)
जानी चािहए।
34 A) सी. डी ई एन (CO)
B) ए. ई. एन
C) एस. एस. ई(Works)
D)चीफ ओ एस

Engineering (Works) Question Bank 2020 Page 9


ZRTI Bhusawal

Construction of Buildings, Platform, etc.


Full Form of NBC
A) National Building Committee
B) National Building Code
C) National Building Corps
D) National Board Certification
National Building
35 िडकोड NBC Code
A) National Building Committee
B) National Building Code
C) National Building Corps
D) National Board Certification

What should be the per capita consumption for designing the water supply
system?
A) 100 litres per person per day
B) 180 litres per person per day
C) 200 litres per person per day
D) 220 litres per person per day 200 litres per
person per day
पानी की आपूित णाली को िडजाइन करने के िलए ित ि खपत या होनी /200 लीटर ित
चािहए? ि ित िदन
36 A) 100 लीटर ित ि ित िदन
B) 180 लीटर ित ि ित िदन
C) 200 लीटर ित ि ित िदन
D) 220 लीटर ित ि ित िदन

What should be the Minimum height of plinth from the surrounding


ground?
A) 60 cm
B) 45 cm
C) 30 cm
D) 25 cm
आसपास के मैदान से ि लथ की यूनतम ऊंचाई िकतनी होनी चािहए? 45 cm / 45 से. मी.
37 A) 60 से. मी.
B) 45 से. मी.
C) 30 से. मी.
D) 25 से. मी.

Which Code is used for design of structures for Earthquake resistant design
in construction of buildings?
A) IS 456-2000
B) IS 816-1969
C) IS 4326-1993
38 IS 4326-1993
D) IS 2720-1980

भवन के िनमाण म भूकंप ितरोधी िडजाइन के िलए संरचना के िडजाइन के िलए


िकस कोड का उपयोग िकया जाता है?
A) IS 456-2000

Engineering (Works) Question Bank 2020 Page 10


ZRTI Bhusawal

B) IS 816-1969
C) IS 4326-1993
D) IS 2720-1980
For addition and alteration of any temporary structures whose written
sanction should be necessary.
A) ADEN
B) SR. DEN
C) DRM
D) PCE

िकसी भी अ थायी संरचना को जोड़ने और बदलने के िलए िकनकी िलिखत मंजूरी आव यक Sr. DEN
है?
39
A) ए डीईएन
B) एस.आर. िदन
C) डी.आर.एम.
D) पीसीई
In office building, How many Urinal are proposed for every 7 to 20 persons.
A) 1
B) 2
C) 3
D) 4
One / 1
40 कायालय भवन म, येक 7 से 20 ि य के िलए िकतने मू ालय तािवत ह।
A) 1
B) 2
C) 3
D) 4

In office building, drinking water fountain to be provided one for how many
persons.
A) 200
B) 150
C) 125
D) 100
100
कायालय भवन म, िकतने ि य के िलए पीने का पानी का फ वारा उपल ध कराया
41 जाना है।
A) 200
B) 150
C) 125
D) 100

Plinth Area for type II quarters


A) 35.50 sqm
42 B) 45 sqm
C) 34 sqm 45 sq. meter
D) 55.75 sqm
टाईप टू ाटर का ि लथ ऐिरया
A) 35.50 sqm

Engineering (Works) Question Bank 2020 Page 11


ZRTI Bhusawal

B) 45 sqm
C) 34 sqm
D) 55.75 sqm
Plinth area for type IV quarters is ___________.
A) 55.75 sqm
B) 139.35 sqm
C) 83.60 sqm
D) 85.50 sqm
टाईप IV ाटर का ि लथ ऐिरया 83.60 sq. meter
43
A) 55.75 वगमीटर
B) 139.35 वगमीटर
C) 83.60 वगमीटर
D) 85.50 वगमीटर
approval of concerned grade officer is necessary for using New material
available in the market may be used
A) JAG
B) Jr. Scale
C) Selection Grade
D) SAG
SAG
बाजार म उपल ध नई साम ी का उपयोग करने के िलए संबिं धत ेड अिधकारी की
44 मंजूरी आव यक है?
A) JAG
B) Jr. Scale
C) Selection Grade
D) SAG

Minimum slope to be provided on the Floor of bathroom towards water


outlets.
A) 1 in 60
B) 1 in 100
C) 1 in 80
D) 1 in 50
1 in 60
45 पानी के आउटलेट की ओर बाथ म के फश पर दान की जाने वाली यूनतम ढलान।
A) 60 म 1
B) 100 म 1
C) 80 म 1
D) 50 म 1
As per NBC, minimum size of bathroom .
A) 2.0 sqm
B) 1.5 sqm
46 C) 1.8 sqm
D) 2.2 sqm 1.8 sq. meter /1.8
वगमीटर
एनबीसी के अनुसार, बाथ म का यूनतम आकार

A) 2.0 वगमीटर
B) 1.5 वगमीटर

Engineering (Works) Question Bank 2020 Page 12


ZRTI Bhusawal

C) 1.8 वगमीटर
D) 2.2 वगमीटर

Inspection And Maintenance Of Buildings


When SSE (Works) should inspect all the buildings, water supply
installations, sewage installations and drainage arrangements?
A) Once in 6 months
B) Once a year
C) Once in 3 months
D) Once in month
Once a Year / वष
कब एसएसई (व स) को सभी भवन , जल आपूित ित ान , सीवेज ित ान और जल म एक बार
47 िनकासी व था का िनरी ण करना चािहए?
A) 6 महीने म एक बार
B) वष म एक बार
C) 3 महीने म एक बार
D) महीने म एक बार
When should be All the structures situated alongside the running lines
should be thoroughly inspected by SSE/JE (Works)?
A) Once in 6 months
B) Once a year
C) Once in 3 months
D) Once in month Once in 6 Months
/ 6 महीने म एक
एसएसई / जेई (व स) ारा चलने वाली लाइन के साथ ि थत सभी संरचना का बार
48 अ छी तरह से िनरी ण कब िकया जाना चािहए?
A) 6 महीने म एक बार
B) वष म एक बार
C) 3 महीने म एक बार
D) महीने म एक बार
When the Annual Zonal contract was commences every year.
A) 1st September
B) 1st April
C) 1st July
D) 1st January
1st July
49 हर साल एनुअल जोनल कॉ ै ट कब शु होता है।
A) 1st September
B) 1st April
C) 1st July
D) 1st January
Decode SIG
A) Station Information Group
B) Service Installation Group
Service
50 C) Station improvement Group
Improvement
D) Service Improvement Group
Group
िडकोड SIG
A) Station Information Group

Engineering (Works) Question Bank 2020 Page 13


ZRTI Bhusawal

B) Service Installation Group


C) Station improvement Group
D) Service Improvement Group

When should the inspection of Colony Care Committee along with SSE
(Works)?
A) Once in 6 months
B) Once a year
C) Once in 3 months
D) Once in month
Three
51 एसएसई (व स) के साथ कॉलोनी के यर कमेटी ारा िनरी ण कब िकया जाएगा
ए) 6 महीने म एक बार
ब) वष म एक बार
ग) 3 महीने म एक बार
घ) महीने म एक बार
When should the Colony care Committee hold meeting?
A) Once in 2 months
B) Once a year
C) Once in 3 months
D) Once in month
Once in 2 months
/ 2 महीने म एक
कॉलोनी की देखभाल सिमित की बैठक कब होनी चािहए? बार
52
ए) 2 महीने म एक बार
ब) वष म एक बार
ग) 3 महीने म एक बार
घ) महीने म एक बार
Petty Repair Register is maintained by whom at every station.
A) IOW
B) AEN
C) Station Master
D) PWI
Station Master /
टेशन मा टर
53 पेटी िरपेयर रिज टर का रखरखाव येक टेशन पर िकसके ारा िकया जाता है।
A) आईओड यू
B) एईएन
C) टेशन मा टर
D) पीड लूआई
Who will be chairman of Colony Care Committee?
A) IOW
B) AEN
C) Station Master
54 D) PWI AEN / एईएन

कॉलोनी के यर कमेटी के अ य कौन ह?


ए) आईओड यू
ब) एईएन

Engineering (Works) Question Bank 2020 Page 14


ZRTI Bhusawal

ग) टेशन मा टर
D) पीड लूआई
How many numbers of members constitutes from each of the two
recognised unions for Colony care Committee?
A) 1
B) 2
C) 3
D) 4
One /1
55
कॉलोनी देखभाल सिमित के िलए दो मा यता ा यूिनयन म से िकतने सद य ह?
A) 1
B) 2
C) 3
D) 4
When should the Painting of the interior wood or steel work should
normally be done
A) 3 to 5
B) 1 to 5
C) 1 to 3
D) 5 to 7

5 to 7 / 5 से 7
आंतिरक लकड़ी या टील के काम की पिटग सामा य प से कब की जानी चािहए
56
A) 3 से 5
B) 1 से 5
C) 1 से 3
D) 5 से 7
When should the Colour washing and distempering of hospital building to be
done for area with having more than 1500 mm rainfall per year?
A) Once in 6 months
B) Once a year
C) Once in 3 months
D) Once in month
Once a Year / वष
ित वष 1500 िममी से अिधक वषा वाले े के िलए अ पताल की इमारत का रंग म एक बार
57 धुलाई और िवचलन कब होना चािहए?
A) 6 महीने म एक बार
B) वष म एक बार
C) 3 महीने म एक बार
D) महीने म एक बार

Inspection Of Steel Structure And Timber Works


58 When should the Inspection of structures such as workshop running shed,
platform cover and FOB to be carried out during prescribed month by SSE.
A) Once in 6 months Once a Year / वष
B) Once a year म एक बार
C) Once in 3 months
D) Once in month

Engineering (Works) Question Bank 2020 Page 15


ZRTI Bhusawal

एसएसई ारा िनधािरत महीने के दौरान कायशाला, रिनग शेड, लेटफॉम कवर और
एफओबी जैसी संरचना का िनरी ण कब िकया जाना चािहए।
ए) 6 महीने म एक बार
ब) वष म एक बार
ग) 3 महीने म एक बार
घ) महीने म एक बार
All exposed steel work should be provided with which material as primary
coat
A) Red Lead
B) Red Oxide
C) Dark Battleship Grey
D) Buff Colour
Red lead / रे ड
लीड
सभी उजागर टील के काम को ाथिमक कोट के प म िकस साम ी के साथ दान
59 िकया जाना चािहए
A) रे ड लीड
B) लाल ऑ साइड
C) डाक बैटलिशप े
D) शौकीन रंग
How much percentage of inspection for FOB by ADEN should be carried out
once in a year?
A) 25%
B) 50%
C) 20 %
D) 100%
One fifth or 20%
ADEN ारा एफओबी के िलए िकतना ितशत िनरी ण एक वष म एक बार िकया जाना
60 चािहए?
A) 25%
B) 50%
C) 20 %
D) 100%
Handling over of commissioned assets by construction organisation to open-
line department should be done within how many days of commissioning of
the said assets.
A) 45 days
B) 90 days
C) 30 days
D) 60 Days
90 days / 90 िदन
ओपन-लाइन िवभाग को िनमाण संगठन ारा कमीशन की गई संपि य की हडिलग उ
61 पिरसंपि य के कमीशन के िकतने िदन के भीतर की जानी चािहए।
A) 45 िदन
B) 90 िदन
C) 30 िदन
D) 60 िदन

Engineering (Works) Question Bank 2020 Page 16


ZRTI Bhusawal

Sanitary Arrangements and Hygienic Conditions


Duration Inspection of Colony care committee.
A) Once in 6 months
B) Once a year
C) Once in 3 months
D) Once in month
Once in 3
कॉलोनी देखभाल सिमित के िनरी ण की अविध। months/ 3 महीने
62 ए) 6 महीने म एक बार म एक बार
ब) वष म एक बार
ग) 3 महीने म एक बार
घ) महीने म एक बार

When should Colony Care Committee will hold meeting


A) Once in 6 months
B) Once a year
C) Once in 3 months
D) Once in 2 months
Once in 2 months
63 कॉलोनी की देखभाल सिमित की बैठक कब होनी चािहए?
A) 6 महीने म एक बार
B) वष म एक बार
C) 3 महीने म एक बार
D) 2 महीने म एक बार
How many numbers of members constitutes from each of the two
recognised unions for Colony care Committee?
A) 1
B) 2
C) 3
D) 4
1
64
कॉलोनी देखभाल सिमित के िलए दो मा यता ा यूिनयन म से िकतने सद य ह?
A) 1
B) 2
C) 3
D) 4
What should be applied to the sides and bottoms of the open well after
cleaning?
A) Fat lime
B) Hydraulic Lime
C) Quick Lime
D) Slaked Lime
Quick Lime /
विरत चूना
65 सफाई के बाद खुले कु एं के िकनार और बॉटम पर या लगाया जाना चािहए।
A) मोटा चूना
B) हाइ ोिलक चूना
C) विरत चूना
D) चूना चूना

Engineering (Works) Question Bank 2020 Page 17


ZRTI Bhusawal

The ground around the well for a how many meters radius of should be kept
clean to guard against pollution.
A) 25 m
B) 40 m
C) 60 m
D) 50 m
50 Meter
िकतने मीटर के दायरे के कु एं के चार ओर के मैदान को दूषण से बचाने के िलए साफ
66 रखना चािहए।
A) 25 मी
B) 40 मीटर
C) 60 मी
D) 50 मीटर

PASSENGER AMENITIES
An abbreviation for PAMS is ________________.
A) Platform Amenities Management System
B) Platform Action Management System
C) Passenger Amenities Management System
Passenger
D) Passenger Action Management System
Amenities
67 Management
PAMS का संि नाम
System
A) Platform Amenities Management System
B) Platform Action Management System
C) Passenger Amenities Management System
D) Passenger Action Management System
The capacity of station platform in discharging passengers at suburban and
non-suburban are
A) 60/min and 40/min
B) 60/min and 30/min
C) 55/min and 35/min
D) 50/min and 30/min 60/min and
40/min /
उपनगरीय और गैर-उपनगरीय म याि य के िनवहन म टेशन लेटफॉम की मता है 60 / िमनट और 40
68 A) 60 / िमनट और 40 / िमनट / िमनट
B) 60 / िमनट और 30 / िमनट
C) 55 / िमनट और 35 / िमनट
D) 50 / िमनट और 30 / िमनट

What is the height for medium level platform for BG.


A) 760 mm
B) 455 mm
C) 840 mm
D) 355 mm 455 mm / 455
69 िममी
बीजी के िलए म यम तर के मंच के िलए ऊंचाई या है।
A) 760 िममी
B) 455 िममी
C) 840 िममी

Engineering (Works) Question Bank 2020 Page 18


ZRTI Bhusawal

D) 355 िममी
In case of island platform, what should be the slope of platform surface
away from the centre of the platform up to the coping on either side?
A) 1 in 100
B) 1 in 40
C) 1 in 80
D) 1 in 60

1 in 60 /60 म 1
70
ीप लेटफ़ॉम के मामले म, लेटफ़ॉम के क से लेटफ़ॉम की सतह का ढलान दोन तरफ
या होना चािहए?
A) 100 म 1
B) 40 म 1
C) 80 म 1
D) 60 म 1
What is the Height of each letter in principal and secondary name boards?
A) 200 mm
B) 300 mm
C) 350 mm
D) 250 mm
300 mm / 300
िममी
71 मुख और मा यिमक नाम बोड म येक अ र की ऊँचाई या है?
A) 200 िममी
B) 300 िममी
C) 350 िममी
D) 250 िम.मी.
What should be the Platform number sign and board colours?
A) White Figure on Blue Background
B) Red Figure on White Background
C) Blue Figure on White Background
D) Black Figure on White Background White Figure on
Blue Background
/ लू बैक ाउं ड पर
72 लेटफ़ॉम नंबर साइन और बोड रं ग या होना चािहए? हाइट िफगर
A) लू बैक ाउं ड पर हाइट िफगर
B) सफे द पृ भूिम पर लाल िच ा
C) सफे द पृ भूिम पर नीला िच
D) हाइट बैक ाउं ड पर लैक िफगर

Water Supply
Which test is utilized to assess the yield of the test well?
A) Samples of strata
B) Samples of underground water
73 C) Recuperation Test Recuperation Test
D) Diameter of Well / रीकू परेशन टे ट

परी ण की उपज का अ छी तरह से आकलन करने के िलए िकस परी ण का उपयोग


िकया जाता है?

Engineering (Works) Question Bank 2020 Page 19


ZRTI Bhusawal

क) समता के नमूने
बी) भूिमगत पानी के नमूने
ग) रीकू परेशन टे ट
डी) वेल का ास
What should be the minimum residual pressure at ferrule points for two
storey buildings for designing the distribution system?
A) 10 m
B) 15 m
C) 12 m
D) 16 m
12 meter / 12
िवतरण णाली को िडजाइन करने के िलए दो मंिजला इमारत के िलए फे िबदु पर मीटर
74
यूनतम अविश दबाव या होना चािहए?
A) 10 मी
B) 15 मीटर
C) 12 मीटर
D) 16 मी
What should be fitted to the connection for saving long length of service
pipelines?
A) Non Return valve
B) Pressure Valve
C) Scour Valve
D) Control Valve
Control Valve /
सेवा पाइपलाइन की लंबाई को बचाने के िलए कने शन के िलए या िफट होना िनयं ण वा व
75
चािहए।
ए) नॉन िरटन वा व
बी) दबाव वा व
सी) कॉर वा व
डी) िनयं ण वा व
What should be the Minimum space between two adjoining pumps or
motors for small/medium units as well as for large units?
A) 0.6 m and 1 m
B) 0.5 m and 1 m
C) 0.6 m and 1.2 m
D) 0.5 m and 1.2 m
0.6 meters and 1
meter / 0.6 मीटर
छोटी / म यम इकाइय के साथ-साथ बड़ी इकाइय के िलए दो िनकटवत पंप या मोटस और 1 मीटर
76 के बीच यूनतम थान या होना चािहए?
ए) 0.6 मीटर और 1 मीटर
बी) 0.5 मीटर और 1 मीटर
सी) 0.6 मीटर और 1.2 मीटर
डी) 0.5 मीटर और 1.2 मीटर
77 PSC pipes cater pressure
A) 10 kg per cm2
B) 3 kg per cm2 2 to 20 kg per cm2
C) 24 kg per cm2
D) 2 to 20 kg per cm2

Engineering (Works) Question Bank 2020 Page 20


ZRTI Bhusawal

PSC PIPES म अिधकतम दबाव


A) 10 kg per cm2
B) 3 kg per cm2
C) 24 kg per cm2
D) 2 to 20 kg per cm2
Where should the Scour valves on mains for clearing sediments and
emptying the pipes are provided?
A) Depressions
B) Summits
C) Marshy Places
D) Abrupt Change in gradient
Depressions /
तलछट को साफ करने और पाइप को खाली करने के िलए मेन पर कॉर वा व कहां से अवसाद
78 उपल ध कराए जाने चािहए?
ए) अवसाद
बी) िशखर स मेलन
ग) माश थान
डी) िे डएंट म अचानक पिरवतन
What is used to check concentration of residual chlorine.
A) Baking Soda
B) Copper Sulphate
C) Orthotolodine
79 D) Litmus Paper
Orthotolodine
solution /
अविश लोरीन की सां ता जांचने के िलए या योग िकया जाता है। ऑथ टोलोडीन
ए) बेिकग सोडा
B) कॉपर स फे ट
C) ऑथ टोलोडीन
डी) िलटमस पेपर

Laying and maintenance of sanitary arrangements


What should be the scale of the alignment of the sewer line should be
prepared on survey plan. (m to a cm)
A) 50 m to 1 cm
B) 25 m to 1 cm
C) 200 m to 1 cm
D) 100 m to 1 cm
100
80
सव ण योजना पर सीवर लाइन के संरेखण का पैमाना या होना चािहए। (सेमी से मी)
A) 50 मीटर से 1 सेमी
B) 25 मीटर से 1 सेमी
C) 200 मीटर से 1 सेमी
D) 100 मीटर से 1 सेमी

Engineering (Works) Question Bank 2020 Page 21


ZRTI Bhusawal

How many people the septic tank is serving if the detention period of 24 to
48 hours?
A) 50
B) 100
C) 150
D) 200
50
सेि टक टक का उपयोग िकतने लोग कर रहे ह, अगर िहरासत की अविध 24 से 48 घंटे
81
है?
A) 50
B) 100
C) 150
D) 200
Maximum and minimum Velocity of flow of effluent in drain?
A) 3m/s and 1.5m/s
B) 1m/s and 0.5m/s
C) 2m/s and 1m/s
D) 2m/s and 1.5m/s
2m/s and 1m/s
2 मीटर / सेकंड और
82
नाली म वाह के वाह का अिधकतम और यूनतम वेग? 1 मीटर / सेकंड
ए) 3 मीटर / सेकंड और 1.5 मीटर / सेकंड
बी) 1 मीटर / सेकंड और 0.5 मीटर / सेकंड
ग) 2 मीटर / सेकंड और 1 मीटर / सेकंड
डी) 2 मीटर / सेकंड और 1.5 मीटर / सेकंड
What is the Minimum diameter of sewer line except for hilly areas?
A) 100 mm
B) 200 mm
C) 150 mm
D) 75 mm
200 mm / 200
िममी
83 पहाड़ी े को छोड़कर सीवर लाइन का यूनतम ास या है?
A) 100 िममी
B) 200 िममी
C) 150 िममी
D) 75 िममी
Which pipe is suitable For Velocity greater than 2.4 m/s ?
A) C.I. Pipes
B) Asbestos Pipes
C) PVC Pipes
D) G.I. Pipes
C.I. Pipes / C.I.
पाइ स
84 2.4 m / s से अिधक वेग के िलए कौन सा पाइप उपयु है?
A) C.I. पाइ स
बी) ए बे टस पाइ स
सी) पीवीसी पाइप
D) जी.आई. पाइ स

Engineering (Works) Question Bank 2020 Page 22


ZRTI Bhusawal

What is used to detect the presence of H2S gas in Manhole?


A) PH Paper
B) Safety Lamps
C) Inhaling
D) Lead Acetate Paper
Lead Acetate
Paper
85 मैनहोल म H2S गैस की उपि थित का पता लगाने के िलए या योग िकया जाता है?
A) PH पेपर
बी) सुर ा लप
ग) साँस लेना
डी) लीड एसीटेट पेपर
How much deep below the flow line in the Tank the pans are dipped in case
of aqua privy latrines. A) 5 to 10 cm
B) 2.5 to 5 cm
C) 5 to 7.5 cm
D) 7.5 to 10 cm
7.5 to 10 cm. /7.5
टक म वाह रे खा के नीचे िकतना गहरा है, ए ा ि वी लैि न के मामले म पैन डू बा आ से 10 सेमी
86
है?
ए) 5 से 10 सेमी
बी) 2.5 से 5 सेमी
सी) 5 से 7.5 सेमी
डी) 7.5 से 10 सेमी

Acquisition Management and Disposal of land


Sr. No. Question Answer
Land acquisition officer is nominated by whom?
(A) collector of district
(B) DRM
(C) GM
(D) SSP

87
भूिम अिध हण अिधकारी िकसके ारा नािमत िकया जाता है?
(ए) िजले के कले टर collector of
district
(B) डी.आर.एम.
(C) जी.एम.
(D) एस.एस.पी.
Where the Land plans record are maintained ?
(A)divisional office
(B) Zonal Office
88 (C) ADEN Office divisional office /
(D) IOW Office मंडल कायालय

भूिम योजना का िरकॉड कहां रखा जाता है?

Engineering (Works) Question Bank 2020 Page 23


ZRTI Bhusawal

(ए) मंडल कायालय


(ख) आंचिलक कायालय
(ग) एडीईएन कायालय
(डी) आईओड यू कायालय
Whose Special sanction is required before laying pipe line on railway land for
conveyance of petrol?
(A) PCE
(B) Sr. DEN
(C) ADEN
(D) IOW

89 पे ोल के संवहन के िलए रे लवे भूिम पर पाइप लाइन िबछाने से पहले िकसकी िवशेष
मंजूरी आव यक है?
(A) पीसीई
PCE / पीसीई
(B) सीिनयर डीईएन
(C) ADEN
(D) IOW

Preparation of plans
Work that to be dismantled should be represented by which line?
(A) thin dotted line
(B) thin Straight line
(C) thick dotted line
(D) thick Straight line

90 काय िजसे िवघिटत िकया जाना है उसे िकस रे खा ारा दशाया जाना चािहए?
thin dotted line /
(ए) पतली िबदीदार रेखा
पतली िबदीदार रे खा
(बी) पतली सीधी रे खा
(C) मोटी िबदीदार रेखा
(D) मोटी सीधी रेखा
New additional work should be represented by which line?
(A)Red line.
(B) Yellow Line
(C) Blue Line
(D) Green Line

91 नए अितिर काय को िकस लाइन ारा दशाया जाना चािहए?


(ए) लाल रे खा।
Red line
(B) पीली रे खा
(C) लू लाइन
(D) ीन लाइन
Size of A4 size sheet is:
92 (A) 210 x 297 mm
(B) 594 x 841 mm 210 x 297 mm
(C) 420 x 594 mm
(D) 297 x 420 mm

Engineering (Works) Question Bank 2020 Page 24


ZRTI Bhusawal

A4 आकार शीट का आकार है:


(ए) 210 x 297 िममी
(B) 594 x 841 िममी
(C) 420 x 594 िममी
(D) 297 x 420 िममी

Storage and use of Explosive


The destruction of explosive should be in all case be supervised by whom?
(A) PWI
(B) IOW
(C) Sr.Den
(D) AEN

िव फोटक के िवनाश के सभी मामल म िकसकी िनगरानी होनी चािहए?


93
(ए) पीड लूआई
AEN / एईएन
(बी) आईओड यू
(ग) सीिनयर डी.ई.एन.
(डी) एईएन

Duties
Each Blank muster sheet should be initialled on top by the whom?
(A) PWI
(B) IOW
(C) Sr.Den
(D) AEN
AEN / एईएन
येक लक म टर शीट को िकसके ारा शीष पर आरं भ िकया जाना चािहए?
94
(ए) पीड लूआई
(बी) आईओड यू
(ग) सीिनयर डी.ई.एन.
(डी) एईएन

Construction of Buildings, Platform, etc.


With whose prior approval Addition and alterations to standard type
quarters should can be carried?
(A) Chief Engineer
(B) IOW
(C) Sr.Den
(D) AEN
Chief Engineer /
मु य अिभयंता
िजनकी पूव वीकृ ित के साथ मानक कार के ाटर म पिरवधन और पिरवतन िकए जा
95
सकते ह
(A) मु य अिभयंता
(B) आईओड यू
(C) सीिनयर

Engineering (Works) Question Bank 2020 Page 25


ZRTI Bhusawal

(D) एईएन

INSPECTION AND MAINTENANCE OF BUILDINGS


Colony care Committee should be formed in colony having more than how
many quarters normally.
(A) 100
(B) 10000
(C) 500
(D) 1000
1000
कॉलोनी देखभाल सिमित का गठन कॉलोनी म होना चािहए, जो सामा य प से िकतने
ाटर से अिधक है।
96
(A) 100
(B) 10000
(C) 500
(D) 1000
Duration of Whitewashing in Running Room kitchen.
(A) Once in 3 months
(B) Once in 2 months
(C) once a year
(D) Once in 6 months Once in 6 months
/ 6 महीने म एक
रिनग म की रसोई म हाइटवॉिशग की अविध। बार
97
(ए) 3 महीने म एक बार
(बी) 2 महीने म एक बार
(ग) वष म एक बार
(D) 6 महीने म एक बार
Duration of Colour washing of running room exterior to be done, where
rainfall is not less than 1500mm per year.
(A) 3 months
(B) 2 months
(C) once a year
(D) 6 months
once a year / वष
रिनग म के बाहरी रं ग की धुलाई की अविध, जहां वषा 1500 िममी ित वष से कम म एक बार
नह है।
98
(ए) 3 महीने
(बी) 2 महीने
(ग) वष म एक बार
(D) 6 महीने

PASSENGER AMENITIES
Standard slope for installation of escalators at important stations in degrees
(A) 60 degrees.
99 (B) 45 degrees.
30 degrees.
(C) 30 degrees.
/ 30 िड ी से।
(D) 50 degrees.

Engineering (Works) Question Bank 2020 Page 26


ZRTI Bhusawal

मह वपूण टेशन पर ए के लेटर की थापना के िलए मानक ढलान (िड ी म)


(ए) 60 िड ी।
(B) 45 िड ी से।
(C) 30 िड ी से।
(D) 50 िड ी से।
What is the Number of booking counter for category B station based on
minimum essential amenities.
(A) 8
(B) 15
(C) 12
(D) 10
10
यूनतम आव यक सुिवधा के आधार पर ेणी बी टेशन के िलए बुिकग काउं टर की
100 सं या या है।
(A) 8
(B) 15
(C) 12
(D) 10
WATER SUPPLY
In verticality of tube well what is the maximum deviation for every 30m of
boring is acceptable.
(A)75 mm
(B) 25 mm
(C) 50 mm
(D) 100 mm
100mm / 100
िममी
ूबवेल की ऊ वाधरता म बोिरग के येक 30 मीटर के िलए अिधकतम िवचलन या
वीकाय है।
101
(A) 75 िममी
(B) 25 िम.मी.
(C) 50 िम.मी.
(D) 100 िममी
During Chlorination, what is the minimum contact time is provided before
delivery of water.
(A) 30 to 60 minutes
(B) 60 to 90 minutes
(C) 10 to 30 minutes
(D) 20 to 45 minutes
30 to 60 minutes
/ 30 से 60 िमनट
लोरीनेशन के दौरान, पानी की िडलीवरी से पहले यूनतम संपक समय या है।
102
(A) 30 से 60 िमनट
(B) 60 से 90 िमनट
(C) 10 से 30 िमनट
(D) 20 से 45 िमनट

Laying and maintenance of sanitary arrangements

Engineering (Works) Question Bank 2020 Page 27


ZRTI Bhusawal

What is the Distance between two Manholes of upto 300 mm diameter of


sewer line?
(A) 60 m.
(B) 15 m.
(C) 30 m.
(D) 45 m.
45 m. /45 मी.

सीवर लाइन के 300 िममी ास तक के दो मैनहोल के बीच की दूरी या है?


103
(ए) 60 मीटर।
(B) 15 मी।
(C) 30 मी।
(D) 45 मी।
Minimum thickness of lead at the face of socket is not less than how many
mm.
(A) 3 mm.
(B) 20 mm.
(C) 12 mm.
(D) 6 mm.
6 mm. / 6 िम.मी.
सॉके ट के चेहरे पर लीड की यूनतम मोटाई िकतने िममी से कम नह है।
104
(ए) 3 िममी।
(B) 20 िम.मी.
(C) 12 िम.मी.
(D) 6 िम.मी.

Engineering (Works) Question Bank 2020 Page 28


ZRTI Bhusawal

Answer Key Spell – 1 paper 1st


1 B 27 A 53 C 79 C
2 C 28 A 54 B 80 D
3 A 29 C 55 A 81 A
4 D 30 C 56 D 82 C
5 D 31 D 57 B 83 B
6 B 32 A 58 B 84 A
7 A 33 D 59 A 85 D
8 D 34 C 60 C 86 D
9 A 35 B 61 B 87 A
10 D 36 C 62 C 88 A
11 C 37 B 63 D 89 A
12 D 38 C 64 A 90 A
13 A 39 B 65 C 91 A
14 A 40 A 66 D 92 A
15 A 41 D 67 C 93 D
16 B 42 B 68 A 94 D
17 B 43 C 69 B 95 A
18 D 44 D 70 D 96 D
19 C 45 A 71 B 97 D
20 D 46 C 72 A 98 C
21 A 47 B 73 C 99 C
22 D 48 A 74 C 100 D
23 D 49 C 75 D 101 D
24 C 50 D 76 A 102 A
25 D 51 C 77 D 103 D
26 A 52 A 78 A 104 D

Engineering (Works) Question Bank 2020 Page 29


ZRTI Bhusawal

Decoding
Sr. No. Full form of following
105 RPF - Railway protection force
106 GRP- Government railway police
107 RPUP- Railway property unlawful possession

Short Answer
Sr. No. Plantation and horticulture
108 Felling of Trees.
109 Harvesting of Matured Trees.
110 Nursery
111 Auction and Tender Notice for sell of natural product.
112 Fixing of reserve price of lots.

Acquisition Management and Disposal of land


113 Ownership of railway land.
114 Principles or aspects of acquiring lands.
115 Demarcation of land boundaries.
116 Boundary stones.
117 Annual license fee.

Preparation of plans
118 Titles and numbering of drawing sheets.
119 Symbols and colour on Drawing.
120 Care and filling of tracing.

Storage and use of Explosive


121 Disposal of explosive.
122 Misfires
123 Carriage of explosives.
124 Destruction of black powder of Explosives.

Police Jurisdiction and Security of Railway materials


125 GRP
126 RPF
127 Cognizable offence
128 Non Cognizable offence.

Engineering (Works) Question Bank 2020 Page 30


ZRTI Bhusawal

Duties

129 Essential Duties of SSE/JE (Works)


130 Essential Duties of AEN
131 Duties of AEN for execution and monitoring of works.
132 Relinquishment of charge by SSE ( Works )
133 AEN's duties while accompanying inspection by higher officials

Construction of Buildings, Platform, etc.


134 Basic amenities in Staff quarters.
135 Green Building.
136 Rain water Harvesting
137 Building Registers.
138 Responsibilities of staff occupying quarters.
139 Benefits of Green Building.

Inspection And Maintenance Of Buildings


140 Petty repair book
141 Colony care Committee
142 SIG
143 periodical maintenance work
144 Standard measurement registers for building.

Inspection Of Steel Structure And Timber Works


145 Handing over of commissioned assets by construction organisation to open line.
146 Details of inspection of structural steel work.
147 Periodical inspection of Structural steel and timber work.
148 Structural steel and timber work inspection register.

Sanitary Arrangements and Hygienic Conditions


149 Comment on Railway Sanitation Committee.
150 Classification of conservancy work.
151 Comment on Service Improvement Group.
152 Briefly explain items coming under the purview of colony care committee
153 Comment on protection of wells used for drinking.

Passenger Amenities
154 Discuss different types of platform sign boards with their colour schemes.
155 Give brief idea of passenger amenities booklets
156 What are the design parameters for booking offices
157 Write in short about designing parameters for platform.
158 Discuss factors on basis on which FOB or Subways are provided.

WATER SUPPLY
Engineering (Works) Question Bank 2020 Page 31
ZRTI Bhusawal

Briefly discuss data required for preparation of scheme for new water supply or augmentation of
159 existing water supply.
160 Discuss various methods for improving yield in open wells.
161 What are the different failure of wells and their remedial measures?
162 Discuss different points to be paid attention while installing a pump.
163 Discuss different conveyance of water from source.

Laying and maintenance of sanitary arrangements


164 Factors affecting quantity of sewage.
165 Comment on material choice for sewage.
166 Differentiate between Aqua privies and Bio Latrines.
167 Discuss recommended Toilet system
168 Comment on Periodical cleaning of drainage system.

Long Answer
Sr. No. Plantation and horticulture
169 Write Down various steps involved in sales of natural product?
170 Write Down the procedure of planting and caring of new trees or young tree?
171 Write in brief about the hedges and lawn for officers and senior supervisor quarters?
172 Write about register of sales of natural product?

Acquisition Management and Disposal of land


173 Write down preventive measures to avoid encroachment and trespassing?
174 Write down various steps involve for prevention and removal of encroachments?
175 Steps to control unauthorised use of railway land?
176 Define classification of encroachments in various categories?
177 Licensing of railways land to well fare organisation and private schools?

Preparation of plans
178 List of information to be provided for detailing of drawing?

Storage and use of Explosive


179 Various instructions laid down for destruction of various parts of explosives?
180 Write precaution to be taken during blasting operation?
181 General use of explosives in construction works?

Duties
182 Duties of SSE/JE (Works)
183 Duties of AEN
184 Inspection to be carried out by SSE (Works)
185 SSE (Works) duties regarding establishment matters.

Engineering (Works) Question Bank 2020 Page 32


ZRTI Bhusawal

Construction of Buildings, Platform, etc.


186 What are the points to be considered while planning of Railway staff colonies?
187 Detail about orientation of buildings while planning of Railway staff colonies.
188 General design requirement of buildings.
189 Special features of Earthquake Resistant Buildings.
190 Strategies for Green Building.

Inspection And Maintenance Of Buildings


191 List out various requisites for ensuring leak proof of a building explaining each of them in brief.
Show by neat sketches general arrangement at junction of roof and parapet wall. Mention the
192 various parts including Water proofing treatment and DPC in the sketch.
Draw sketches for the following (A) Water proofing of roofs using mud phuska (B) General
193 arrangement at expansion joint ( C) general arrangements at junction of roofs and parapet wall.
194 Write in details about course of action for roofs leaking at isolated points.
195 Explain Lime Concrete Terracing with sketch.

Sanitary Arrangements and Hygienic Conditions


196 Explain Colony Care Committee with its agenda.
197 Comment on Sanitary protection of installation.
198 What are the Sanitary arrangements in station yards, service buildings and colony. Explain?
199 Agenda of Inspection done by Sanitation Committees?
What are the precautions taken against infectious diseases to maintain hygienic conditions in
200 station buildings, yards and railway colonies?

Passenger Amenities
Discuss in detail parameters required while designing station complexes, station buildings,
201 approach roads and circulating area.
What are the items concerning Engineering department as per provision of "The Persons With
202 Disabilities Act”. Discuss in details.
203 Discuss passenger amenities at model/ adarsh station.
Discuss minimum recommended and desirable amenities for booking facilities, drinking water,
204 waiting hall, urinals, latrines, platform shelters and seating arrangements.
Discuss categorisation of stations along with parameters to be kept in mind while providing
205 lighting, latrines, urinals, water supply, platform covers, etc. amenities.

WATER SUPPLY
206 Discuss in detail various sources of water supply.
Discuss method and process of water purification and treatment. Also give brief introduction
207 about RO process.
Discuss responsibilities of Engineering Department in maintenance and operation of water supply
208 installations.
209 Discuss water supply distribution system in detail.
210 What are the different types of pipe fittings? Discuss.

Laying and maintenance of sanitary arrangements

Engineering (Works) Question Bank 2020 Page 33


ZRTI Bhusawal

211 Discuss various sanitary fittings along with specifications


Explain inspection and maintenance of Sewerage system along with the precautions to be taken
212 during cleaning of manholes
213 Discuss various techniques of sewage disposal
214 Discuss various parameters of the sewerage scheme report
What are the parameters which influence designing of sewers and quantity of sewage ? Also
215 discuss importance of alignment of sewer and velocity of flow.

Engineering (Works) Question Bank 2020 Page 34


ZRTI Bhusawal

Questions (Spell 1)
Paper-2
Sr. No. Engineering code (Project development process) Answer
In reconnaissance survey which measuring instrument is used?
(a) theodolite
(b) Dumpty level
(c) Total station
(d) No instrument is used

टोही सव ण म िकस मापक यं का उपयोग िकया जाता है? No instrument is


1 (a) िथयोडोलाइट used/ िकसी उपकरण
(b) ड टी तर का उपयोग नह िकया
(c) कु ल टेशन जाता है
(d) िकसी उपकरण का उपयोग नह िकया जाता है
Preliminary survey will solely decide whether a line Is to be built or not.
(a) reconnaissance survey
(b) preliminary survey
(c) Final location survey
(d) none of these.

ारंिभक सव ण पूरी तरह से तय करे गा िक एक लाइन का िनमाण िकया जाना है या नह । Final location
2. survey/ अंितम थान
(ए) टोही सव ण
(b) ारंिभक सव ण सव ण
(c) अंितम थान सव ण
(d) इनम से कोई नह ।
What percentage is minimum acceptable rate of return by applying DCF
technique for financial appraisal?
(a) 10%
(b) 2.0%
(c) 5%
(d) 12.5%

िव ीय मू यांकन के िलए डीसीएफ तकनीक लागू करके िरटन की यूनतम वीकाय दर


या है?
3. (ए) १०%
(बी) 2.0%
(ग) ५% 10%
(d) 12.5%
What should be the useful life of assets taken For financial appraisal?
(a)5
(b) 10
4.
(c) 20
(d) 30
30
िव ीय मू यांकन के िलए ली गई संपि का उपयोगी जीवन या होना चािहए?

Engineering (Works) Question Bank 2020 Page 35


ZRTI Bhusawal

(a)5
(b) 10
(c) 20
(d) 30
All doubling should be taken over by open line organisation within how
many Months of the date of opening to goods traffic, ballasting and other
residual works.
(a) 12
(b) 3
(c) 9
(d) 6

माल यातायात, िग ी और अ य अविश काय के िलए खोलने की तारीख के िकतने


महीने के भीतर ओपनलाइन संगठन ारा सभी दोहरीकरण को िलया जाना चािहए।
(a) १२
5.
(b) ३
(c) 9
(d) 6 6 months

Completion report for the work should be given in which form?


(a) E-1720
(b) E-1702
(c) E-702
(d) E-1706

काय के िलए पूणता िरपोट िकस प म दी जानी चािहए?


6. (ए) ई -1720
(b) ई -1702
(c) ई -702 E-1706
(d) ई -1706
For opening of passenger traffic at least how many month notice should
be given to who this is given for the date on which it is desired that the
inspection should takes place.
(a) one and CRS
(b) two and CCRS
(c) one and ACRS
(d) one and CCRS

या ी यातायात को खोलने के िलए कम से कम िकतने महीने का नोिटस िदया जाना


चािहए यह िकसके िलए िदया गया है, िजस पर यह वांिछत है िक िनरी ण हो।
7. (A) एक और सीआरएस
(b) दो और CCRS One and ACRS/ एक
(c) एक और ACRS और ACRS
(d) एक और CCRS
Who will be the in-charge of the engineering survey of the project will also
be in overall in-charge of the traffic survey of the project.
8.
(a) DY.CE
(b) PCE
(c) ADEN PCE
(d) Sr.DEN(Co)

Engineering (Works) Question Bank 2020 Page 36


ZRTI Bhusawal

जो पिरयोजना के इं जीिनयिरग सव ण के भारी ह गे, पिरयोजना के यातायात


सव ण के सम भारी भी ह गे।
(a) डी. सी ई.
(b) पी. सी. ई
(c) ए. डी. ई. एन
(D) सीिनयर डी. ई. एन (को)
For working financial appraisal of railway project reference may be made
to which chapter of which code?
(a) First and IRFC
(b) Second and IRFC
(c) Third and IRPWM
(d) second and IRWM-2000

रेलवे पिरयोजना के िव ीय मू यांकन का काय करने के िलए संदभ िकस कोड के िकस
अ याय म बनाया जा सकता है? Second and Indian
9. (ए) थम और आईआरएफसी Railway financial
(b) दूसरा और IRFC code / दूसरा और
(c) तीसरा और IRPWM IRFC
(d) दूसरा और IRWM-2000
FULL FORM OF PFA
(a) Principle Finance Advisor
(b) Principle Finance Assistant
(c) Principle Finance Administrator
(d) Principle Finance Auditor
10. पीएफए के पूण फाम
(a) Principle Finance Advisor
(b) Principle Finance Assistant Principle finance
(c) Principle Finance Administrator advisor
(d) Principle Finance Auditor

Engineering survey
Which survey is detailed examination of route or routes obtained?
(a) Preliminary
(b) Reconnaissance
(c) Detailed
(d) Final location

माग या माग की िव तृत जांच के िलए िकस सव ण का उपयोग िकया जाता है?
11 (a) ारंिभक
(b) टोही Preliminary/
(c) िव तृत ारंिभक
(d) अंितम थान

Engineering (Works) Question Bank 2020 Page 37


ZRTI Bhusawal

Staking out of the alignment with the theodolite is required in which


survey.
(a) Preliminary
(b) Reconnaissance
(c) Detailed
(d) Final location

िकस सव ण म िथयोडोलाइट के साथ संरेखण का टैिकग-आउट आव यक है।


12 (a) ारंिभक
(b) टोही
(c) िव तृत Detailed/ िव तृत
(d) अंितम थान
Which survey is used to obtain Proper working details and accurate
costing is done in which Survey.
(a) Preliminary
(b) Reconnaissance
(c) Detailed
(d) Final location

कौन सा सव ण उिचत काय िववरण ा करने के िलए है और सटीक लागत िनधारण


िकया जाता है।
13 ( ारं िभक
(b) टोही Final location
(c) िव तृत survey / अंितम थान
(d) अंितम थान
The whole data plotted on a sheet after final location survey called:
(a) Preliminary Plan and Section
(b) Cross-Sections
(c) Detailed plan and section
(d) Detailed sections

अंितम थान सव ण के बाद एक शीट पर पूरा डाटा लॉट िकया जाता है


14 (ए) ारं िभक योजना और अनुभाग Detailed plan and
(b) ॉस-से शन section / िव तृत
(c) िव तृत योजना और अनुभाग योजना और अनुभाग
(d) िव तृत अनुभाग
Survey which is normally based on contour survey
(a) Preliminary
(b) Reconnaissance
(c) Detailed
(d) Final location

सव ण जो आम तौर पर समो सव ण पर आधािरत होता है


15
(a) ारंिभक
(b) टोही
Reconnaissance
(c) िव तृत survey / टोही
(d) अंितम थान

Engineering (Works) Question Bank 2020 Page 38


ZRTI Bhusawal

In a preliminary survey bench mark should similarly be left at an interval of


about how many meters?
(a) 50
(b) 100
(c) 250
(d) 500

एक ारंिभक सव ण बच माक म लगभग िकतने मीटर के अंतराल पर छोड़ा जाना


चािहए?
16
(a) 50
(b) 100
(c) 250 500
(d) 500
The centre line finally located should be marked out by pegs at how many
meters?
(a) 10
(b) 500
(c) 20
(d) 100

अंत म ि थत क रे खा को िकतने मीटर पर खूंटे से िचि नत िकया जाना चािहए?


17
(a) 10
(b) 500
(c) 20 20
(d) 100
At how many meter interval a large peg is used which have number
braded on stamped on them?
(a) 10
(b) 50
(c) 100
(d) 500

िकतने मीटर अंतराल पर एक बड़े खूंटे का उपयोग िकया जाता है, िजस पर सं या
अंिकत होती है?
18
(a) १०
(b) 50
(c) 100 100
(d) 500
Masonry pillars should built at the tangent point of curve and along the
centre line at interval of not less than ……. meters
19
(a) 500
(b) 1000
(c) 100 500
(d) 10
The degree of curvature should be taken as the angle at the centre
subtended by an arc of how many meters in length?
20
(a) 30
(b) 20
(c) 30.5 30.5meter
(d) 100

Engineering (Works) Question Bank 2020 Page 39


ZRTI Bhusawal

व ता की िड ी को क म कोण के प म िलया जाना चािहए, जो लंबाई म िकतने


मीटर के चाप ारा ित थािपत िकया जाता है?
(a) 30
(b) 20
(c) 30.5
(d) 100
Compensation on gradient for BG in percentage for curvature.
(a) 1
(b) 2
(c) 3
(d) 4

ितशत म ॉड गेज के िलए ड


े मुआवजा।
21
(ए) १
(b) २
(c) 3 4
(d) 4

Execution of works
Material modification need approval of the estimate by whom?
(a) sanctioning authority
(b) competent authority
(c) FA and CAO
(d) Railway board

साम ी संशोधन को अनुमान की वीकृ ित की आव यकता िकसके ारा है?


22 (a) ािधकारी को मंजूरी देना
(b) स म ािधकारी Sanctioning
(c) एफए और सीएओ authority
(d) रेलवे बोड
Execution of work can be carried out by …………………………..
23
(a) verbal order
(b) written order
(c) verbal order by competent authority Written order
(d) none of these
How much percentage is supervision charge for the deposit work as
the total cost.
(a) 10%
(b) 5 %
(c) 2%
(d) 12.5%

कु ल लागत के जमा काय के िलए पयवे ण ितशत िकतना है।


24 (a) 10%
(b) 5%
(c) 2% 12.5%
(d) 12.5%

Engineering (Works) Question Bank 2020 Page 40


ZRTI Bhusawal

Introduction of any new station or omission of any station is classified in


which type of Modification.
(a) station modification
(b) material modification
(c) estimate modification
(d) none of these

िकसी भी टेशन को जोड़ने या हटाने का वग करण िकस कार के संशोधन म िकया


जाता है।
25 (ए) टेशन संशोधन
(बी) साम ी संशोधन Material
(c) अनुमान संशोधन modification
(d) इनम से कोई नह
Progress report of all works during the month in a division to be submitted
to …………..
26
(a) DY.CE
(b) ADEN
(c) DEN PCE
(d) PCE
The introduction or omissions of any work or facility involving how
much amount comes under material modification?
(a) 2 lakhs
(b) 5 lakhs
(c) 10 lakhs
(d)1 lakhs

िकसी भी काय या सुिवधा को शािमल करने या हटाने से साम ी संशोधन के तहत


िकतनी रािश आती है?
27 (a) 2 लाख
(b) 5 लाख
(c) 10 लाख 5 lakhs / 5 लाख
(d) 1 लाख
The scope of the term material modification can be extended by whom on
his discretion under some conditions.
(a) DRM
(b) GM
(c) DY.CE
(d) PFA

साम ी संशोधन के दायरे को कु छ शत के तहत िकसके िववेक से बढ़ाया जा सकता है।


28 (a) डी.आर.एम.
(b) जी.एम.
(c) डी. सी.ई GM/ जी.एम
(d) पीएफए

Engineering (Works) Question Bank 2020 Page 41


ZRTI Bhusawal

Any particulars to the progress of works are entered in which book by


upper subordinate?
(a) work
(b) order
(c) pink
(d) note

ऊपरी अधीन थ ारा िकस पु तक म िकसी िवशेष काय की गित दज की जाती है?
29 (a) काम
(b) आदेश
(c) गुलाबी Note
(d) नोट
For all important works which book should be opened for all instruction
issued to executive, subordinate or contractor?
(a) work
(b) order
(c) pink
(d) note

कायकारी, अधीन थ या ठे केदार को जारी िकए गए सभी िनदश के िलए सभी


मह वपूण काय के िलए कौन सी पु तक खोली जानी चािहए?
30 (a)एक काम
(b) आदेश
(c) गुलाबी Order/ आदेश
(d) नोट

New building material


31 The cost of fly ash brick compared Traditional clay brick. More/ अिधक है
(a) more
(b) less
(c) equal to
(d) none of these

पारंपिरक िम ी की ट की तुलना म लाई ऐश ट की लागत।


(a) अिधक है
(b) कम है
(ग) के बराबर
(d) इनम से कोई नह
32 Full form of HDF…………………………. High density fibre
(a) High density fibre board board
(b) Hard density fibre board
(c) heavy density fibre board
(d) none of these
HDF का फु ल फॉम
a) High density fibre board
(b) Hard density fibre board
(c) heavy density fibre board
(d) none of these

Engineering (Works) Question Bank 2020 Page 42


ZRTI Bhusawal

Full form of LDF…………………………. Low density fibre


(a) low density fibre board board
(b) loose density fibre board
(c) less density fibre board
(d) none of these
LDF का फु ल फॉम
33
(a) low density fibre board
(b) loose density fibre board
(c) less density fibre board
(d) none of these
Circuit board is made by which type of laminates. Industrial laminates
(a) particle laminates
(b) hylum laminates
(c) industrial laminates
(d) none of these

सिकट बोड िकस कार के लेिमने स ारा बनाया जाता है।


34 (ए) कण लेिमने स
(b) िहिलयम लेिमने स
(c) औ ोिगक लेिमने स
(d) इनम से कोई नह
Full form of AAC……………….. Auto claved
(a) Auto claved agitation concrete aerated concrete
(b) Auto claved aerated concrete
(c) Automatic claved aerated concrete
(d) none of these
AAC का फु ल फॉम
35
(a) Auto claved agitation concrete
(b) Auto claved aerated concrete
(c) Automatic claved aerated concrete
(d) none of these
Maximum percentage of water absorbed by Good building stone are: 5%
(a) 2%
(b) 3%
(c) 5%
(d) 10%

गुड िबि डग टोन ारा अवशोिषत पानी का अिधकतम ितशत ह:


36 (ए) 2%
(बी) ३%
(ग) ५%
(d) 10%
What is the other Name of Toughened? Tampered glass/
(a) tampered glass टे पड – लास
(b) chromatic glass
(c) special class
37 (d) float glass

Toughened-glass का दूसरा नाम या है?


(a) टे पड – लास

Engineering (Works) Question Bank 2020 Page 43


ZRTI Bhusawal

(b) ोमैिटक- लास


(c) िवशेष वग
(d) लोट लास
Glass is used in ICU is a type of. Chromatic glass/
(a) tampered glass ोमैिटक- लास
(b) chromatic glass
(c) special class
(d) float glass
ICU म िकस लास का उपयोग िकया जाता है।
38 (a) टे पड – लास
(b) ोमैिटक- लास
(c) िवशेष वग
(d) लोट लास
Mechanical strength of fly ash brick is compared than traditional clay brick. More/ से अिधक है
(a) more than
(b) less than
(c) equal to
(d) none of these
पारंपिरक िम ी ट की तुलना म लाई ऐश ट की यांि क शि ।
39 (a) से अिधक है
(b) से कम है
(ग) के बराबर
(d) इनम से कोई नह
40 Reduction of water cement ratio by vacuum in concrete increases 10-50%
compressive strength up to how much percentage?
(a) 2%
(b) negligible effect
(c) 10-50%
(d) up to 90%
कं ीट म वै यूम ारा पानी सीमट अनुपात को कम करने से िकतने ितशत तक
कं िे सव ताकत बढ़ जाती है?
a) 2%
(b) नग य भाव
(c) 10-50%
(d) up to 90%

Schedule of dimensions
41 Maximum gradient in station yard for existing work. 1 in 400 / 400 म 1
(a) 1 in 1200
(b) 1 in 260
(c) 1 in 400
(d) ruling gradient
मौजूदा काम के िलए टेशन याड म अिधकतम ढाल।
(a) 1200 म 1
(b) 260 म 1
(c) 400 म 1
(d) िमक िे डएंट

Engineering (Works) Question Bank 2020 Page 44


ZRTI Bhusawal

Maximum gradient in station yard for new works 1 in 1200 / 1200 म


(a) 1 in 1200 1
(b) 1 in 260
(c) 1 in 400
(d) ruling gradient
नए काय के िलए टेशन याड म अिधकतम ढाल
42 (a) 1200 म 1
(b) 260 म 1
(c) 400 म 1
(d) स ा ढ़ ेिडएंट
Maximum clearance of check rail at level crossing 57 mm /57 िममी
(a) 48mm
(b) 51mm
(c) 44mm
(d) 57mm
लेवल ॉिसग पर चेक रे ल की अिधकतम िनकासी
43 (a) 48 िममी
(b) 51 िममी
(c) 44 िममी
(d) 57 िममी
Minimum clearance of check rail at level crossing 51 mm / 51 िममी
(a) 48mm
(b) 51mm
(c) 44mm
(d) 57mm
लेवल ॉिसग पर चेक रे ल की यूनतम िनकासी
44 (a) 48 िममी
(b) 51 िममी
(c) 44 िममी
(d) 57 िममी
Minimum clearance of check rail at curve 44 mm / 44 िममी
(a) 48mm
(b) 51mm
(c) 44mm
(d) 57mm

व पर चेक रेल की यूनतम िनकासी


45 (a) 48 िममी
(b) 51 िममी
(c) 44 िममी
(d) 57 िममी
Formation width on curve ………………………. Increases/ बढ़ता है
(a) increases
(b) decreases
(c) remain the same
46 (d) none of these

व पर संरचना चौड़ाई
(a) बढ़ता है

Engineering (Works) Question Bank 2020 Page 45


ZRTI Bhusawal

(b) घट जाती है
(c) समान रहते ह
(d) इनम से कोई नह
Full for of MMD……………………………… Maximum moving
(a) Maximum moving dimension dimension
(b) minimum moving dimension
(c) Maximum moving diameter
(d) Maximum modifying dimension
MMD का फु लफॉम
47
(a) Maximum moving dimension
(b) minimum moving dimension
(c) Maximum moving diameter
(d) Maximum modifying dimension
Minimum radius of curve ………………… 175 m /175 मी
(a) 175m
(b) 440m
(c) 875m
(d) 1000m

व की यूनतम ि या
48 (a) 175 मी
(b) 440 मी
(c) 875 मी
(d) 1000 मी
Full form of CRS……………………………… Commissioner of
(a) Commissioner of railway safety railway safety
(b) Commissioner of rail safety
(c) Commission of railway safety
(d) Commissioning of railway safety
CRS का फु लफॉम
49
(a) Commissioner of railway safety
(b) Commissioner of rail safety
(c) Commission of railway safety
(d) Commissioning of railway safety
Formation width for double line BG in cutting 13160 mm /13160
(a) 7850mm िममी
(b) 12160mm
(c) 13160mm
(d) 5300mm

काटने म डबल लाइन बीजी के िलए गठन की चौड़ाई


50 (a) 7850 िममी
(b) 12160 िममी
(c) 13160 िममी
(d) 5300 िममी
Formation width for double line BG in embankment 13160 mm /13160
51
(a) 7850mm िममी
(b) 12160mm
(c) 13160mm
(d) 5300mm

Engineering (Works) Question Bank 2020 Page 46


ZRTI Bhusawal

तटबंध म डबल लाइन बीजी के िलए गठन की चौड़ाई


(a) 7850 िममी
(b) 12160 िममी
(c) 13160 िममी
(d) 5300 िममी
Formation width for single line BG in embankment 7850 mm /7850
(a) 7850mm िममी
(b) 12160mm
(c) 13160mm
(d) 5300mm

तटबंध म िसगल लाइन बीजी के िलए गठन की चौड़ाई


52
(a) 7850 िममी
(b) 12160 िममी
(c) 13160 िममी
(d) 5300 िममी
Formation width for single line BG in cutting 7850 mm/ 7850
(a) 7850mm िममी
(b) 12160mm
(c) 13160mm
(d) 5300mm

काटने म िसगल लाइन बीजी के िलए गठन की चौड़ाई


53
(a) 7850 िममी
(b) 12160 िममी
(c) 13160 िममी
(d) 5300 िममी
Minimum Horizontal distance from centre of track to face of passenger 1670 mm /1670
platform coping: िममी
(a) 1670mm
(b) 1680mm
(c) 1675mm
(d) 1905mm

ैक सटर से या ी लैट-फॉम के कोिपग के मुख तक यूनतम िै तज दूरी


54 (a) 1670 िममी
(b) 1680 िममी
(c) 1675 िममी
(d) 1905 िममी
Maximum Horizontal distance from centre of track to face of passenger 1680mm / 1680
platform coping………………………. िममी
(a) 1670mm
(b) 1680mm
(c) 1675mm
(d) 1905mm
55

ैक सटर से या ी लैट-फॉम के कोिपग के मुख तक अिधकतम ैितज दूरी


(a) 1670 िममी

Engineering (Works) Question Bank 2020 Page 47


ZRTI Bhusawal

(b) 1680 िममी


(c) 1675 िममी
(d) 1905 िममी
Maximum Horizontal distance from centre of track to face of passenger 1905 mm / 1905
platform wall………………………. िममी
(a) 1670mm
(b) 1680mm
(c) 1675mm
(d) 1905mm
या ी लेटफ़ॉम की दीवार के सामने ैक के क से अिधकतम ैितज दूरी ………………………।
56
(a) 1670 िममी
(b) 1680 िममी
(c) 1675 िममी
(d) 1905 िममी
Minimum Horizontal distance from centre of track to face of passenger 1675 mm / 1675
platform wall………………………. िममी
(a) 1670mm
(b) 1680mm
(c) 1675mm
(d) 1905mm
या ी लेटफ़ॉम की दीवार के सामने ैक के क से यूनतम ैितज दूरी ………………………।
57
(a) 1670 िममी
(b) 1680 िममी
(c) 1675 िममी
(d) 1905 िममी
Minimum slope of Diamond crossing 1 in 85 / 85 म 1
(a) 1in85
(b) 1 in 440
(c) I in 400
(d)1 in 1200

डायमंड ॉिसग की यूनतम ढलान


58
(a) 85 म 1
(b) 440 म 1
(c) 400 म 1
(d) 1200 म 1
Minimum horizontal distance of any building on a passenger platform from 5180 mm
centre line track from platform level to 305 mm above platform level increasing
(a) 5330mm uniformly to 5330
(b) 5330 mm decreasing uniformly to 5180 mm. mm./ 5180 िममी
(c) 5180 mm increasing uniformly to 5300 mm. समान प से 5300
(d) 5180 mm increasing uniformly to 5330 mm. िममी तक बढ़ रहा है।

लेटफ़ॉम लेवल से लेकर लेटफ़ॉम लेवल से 305 िममी ऊपर के लेटफ़ॉम क


ै से िकसी पैसजर
लेटफ़ॉम पर िकसी भी िबि डग की यूनतम ैितज दूरी
59
(a) 5330 िममी
(b) 5330 िममी घटकर समान प से 5180 िममी।
(c) 5180 िममी समान प से 5300 िममी तक बढ़ रहा है।
(d) 5180 िमलीमीटर समान प से 5330 िममी तक बढ़ रहा है।

Engineering (Works) Question Bank 2020 Page 48


ZRTI Bhusawal

Investment planning and work budget


Full form of OLWR…………………………… Open line works
(a) Open line works revenue revenue
(b) Old line works revenue
(c) Open land works revenue
(d) Open line works record

OLWR का फु लफॉम
60
(a) Open line works revenue
(b) Old line works revenue
(c) Open land works revenue
(d) Open line works record
For new lines construction plan head is………. 11
(a) 11
(b) 12
(c) 14
(d)16

नई लाइन के िनमाण के िलए लान हेड सं या या है?


61
(a) 11
(b) 12
(c) 14
(d) 16
For other specified works plan head comes under…………… 64
(a) 35
(b) 61
(c) 15
(d) 64
िनिद काय िकस लान हेड सं या के अंतगत आते ह
62
(a) 35
(b) 61
(c) 15
(d) 64
For doubling works plan head comes under……………… 15
(a) 35
(b) 61
(c) 15
(d) 64
दोहरीकरण काय िकस लान हेड सं या के अंतगत आते ह
63
(a) 35
(b) 61
(c) 15
(d) 64
When should the preliminary works programme for the upcoming year be First week of
submitted by the railway board? September
(a) last week of September
(b) First week of April
64
(c) First week of march
(d) First week of September

रे लवे बोड ारा अगले वष के िलए ारं िभक काय काय म कब तुत िकया जाना चािहए?

Engineering (Works) Question Bank 2020 Page 49


ZRTI Bhusawal

(ए) िसतंबर के अंितम स ाह


(b) अ ैल का पहला स ाह
(c) माच का पहला स ाह
(d) िसतंबर का पहला स ाह
Works once introduced through a works programme and taken up after Every year/ हर साल
the estimates have been sanctioned by the competent authority. Till when
it should continue to be included they are finally completed.
(a) every year
(b) up to three year
(c) up to five year
(d) none of these

एक बार एक काय काय म के मा यम से पेश िकया गया और स म ािधकारी ारा


अनुमान को वीकृ त िकए जाने के बाद िलया गया। कब तक इसे शािमल करना जारी
रखना चािहए तब तक वे अंत म पूरा हो जाते ह।
65 (ए) हर साल
(b) तीन साल तक
(ग) पाँच वष तक
(d) इनम से कोई नह
When every year the railway board should convey to each railway in June/July
respect of each plan head the total outlay within which the works
programme should be framed by railway. जून / जुलाई
(a)June/July
(b) march/April
(c) august/September
(d) November/December

हर साल कब तक रे लवे बोड को येक योजना के संबंध म येक रे लवे को बताना


चािहए िक कु ल पिर य िजसके भीतर काय काय म को रेलवे ारा तैयार िकया जाना
चािहए।
66 (क) जून / जुलाई
(b) माच / अ ल ै
(c) अग त / िसतंबर
(d) नवंबर / िदसंबर

Soil Mechanics
Plate load test is carried out to know the
A) BEARING CAPACITY OF SOIL
B) SHEAR STRENGTH OF SOIL
C) COMPRESSIVE STRENGTH OF SOIL
D) NONE

लेट लोड टे ट या जानने के िलये िकया जाता है?


67 A) िम ी की सहनशि
B) िम ी की ताकत Bearing capacity of
C) िम ी की दबाव की शि soil
D) कोई नह िम ी की सहनशि

Engineering (Works) Question Bank 2020 Page 50


ZRTI Bhusawal

What do we call the numerical difference between liquid limit and plastic
limit?
A) LIQUIDITY LIMIT
B) SHRINKAGE LIMIT
C) PLASTICITY INDEX
D) NONE

हम तरल सीमा और लाि टक सीमा के बीच सं या मक अंतर को या कहते ह?


68 ए) िलक़ु इड सीमा
बी) िशरीके ज सीमा Plasticity Index
ग) लाि टसीटी सूचकांक
D) कोई नह
Sheep foot roller is suitable for
A) COHESIONLESS SOIL
B) HARD SOIL
C) COHESIVE SOIL
D) BLACK COTTON SOIL

सीप-फु ट रोलर के िकस के िलए उपयु है?


69 क) िबना जुताई की िम ी Cohesive Soil /
बी) कडक िम ी सामंज यपूण सोइल
ग) सामंज यपूण सोइल
डी) लैक कॉटन सोइल
What do we call the ability of the soil to support the load of the structural
foundation without the failure or deformation?
A) SHEARING CAPACITY
B) FLEXURE STRENGTHs
C) COMPRESSION CAPACITY
D) BEARING CAPACITY

िवफलता या िव पण के िबना संरचना मक न व के भार का समथन करने के िलए हम


िम ी की मता को या कहते ह?
70
A) SHEARING CAPACITY
B) FLEXURE STRENGTHs Bearing capacity
C) COMPRESSION CAPACITY
D) BEARING CAPACITY
OMC stands for
A) ORIGINAL MOISTURE CONTENT
B) OPTIMUM MOISTURE CAPACITY
C) OPTIMUM MOIST CONTENT
D) OPTIMUM MOISTURE CONTENT

OMC का फु लफोम
71 Optimum Moisture
A) ORIGINAL MOISTURE CONTENT
B) OPTIMUM MOISTURE CAPACITY Content
C) OPTIMUM MOIST CONTENT
D) OPTIMUM MOISTURE CONTENT

Engineering (Works) Question Bank 2020 Page 51


ZRTI Bhusawal

MDD stands for


A) MINIMUM DRY DENSITY
B) MAXIMUM DEFORMATION DENSITY
C) MAXIMUM DRY DENSITY
D) NONE
MDD का फु लफोम
72 Maximum Dry
A) MINIMUM DRY DENSITY
B) MAXIMUM DEFORMATION DENSITY Density
C) MAXIMUM DRY DENSITY
D) NONE
Generally what should be the thickness of blanketing material layer?
A) 100
B) 150
C) 200
D) 250

आम तौर पर कं बल साम ी परत की मोटाई या होनी चािहए?


73 A) 100
B) 150 250mm
C) 200
D) 250
Which test is preferred in Laboratory to determine the Max. Dry density as
per RDSO guidelines
A) SAND REPLACEMENT METHOD
B) CORE CUTTER METHOD
C) WATER DISPLACEMENT METHOD
D) NONE
आरडीएसओ िदशािनदश के अनुसार अिधकतम शु क घन व िनधािरत करने के िलए
योगशाला म कौन सा परी ण पसंद िकया जाता है
74 ए) रे त-सुधार िविध Sand Replacement
बी) कोर कटर िविध Method
ग) पानी की माप िविध
D) कोई नह
What percentage is the ration Field dry density to MDD obtained in
Laboratory?
A) 95%
B) 90%
C) 100%
D) 98%

योगशाला म ा एमडीडी के िलए े का सूखा घन व िकतना ितशत है?


75
A) 95%
B) 90% 98%
C) 100%
D) 98%
For proper drainage cross slope for formation top shall be
76
A) 1 IN 40
B) 1 IN 30 1 in 30 /1 म 30
C) 1 IN 20
D) NONE

Engineering (Works) Question Bank 2020 Page 52


ZRTI Bhusawal

गठन के िलए उिचत जल िनकासी ॉस ढलान के िलए होगा


A) 1 म 40
B) 1 म 30
C) 1 म 20
D) कोई नह

SURVEYING
What is the size of plane table?
A) 600mmX600mm
B) 600mmX900mm
C) 750mmX600mm
D) 750mmX750mm
लेन टेबल का आकार या है?
77 A) 600 िममी X600 िममी
B) 600 िममी X900 िममी 750mmx600mm
C) 750 िममी X600 िममी
डी) 750 िममी X750 िममी
What do we call the distance between two consecutive contours?
A) Contour Interval
B) Contour lines Contour Interval
C) Contour difference
D) Contour clearance
/
हम दो लगातार कं टूर के बीच की दूरी को या कहते ह?
78 क) कं टूर इं टरवल
बी) कं टूर लाइन कं टू र इं टरवल
सी) कं टूर अंतर
डी) कं टूर लीयरस
What should be the RB If WCB of a line is 270 degree?
A) N90E
B) N90W
C) S90E
D) NONE

यिद एक लाईन का WCB 270 िड ी है तो RB या होना चािहए?


79 ए) एन 90 ई
बी) एन 90 ड यू N90W or S90W
सी) एस 90 ई
D) कोई नह
ESTIMATE AND CONTRACTS

The contractor shall not employ children below what age as labourers?
80
A) 18
B) 21 14 Years
C) 18
D) 14

Engineering (Works) Question Bank 2020 Page 53


ZRTI Bhusawal

ठे के दार िकस उ से कम उ के ब को मजदूर के प म िनयु नह करे गा?


A) 18
B) 21
C) 18
D) 14
Full form of GCC
A) GENERAL CONDITIONS OF CONTRACT
B) GENERAL CRITERIA OF CONTRACT
C) GENERAL CONTRACT CONDITIONS
D) NONE

81 जीसीसी का फु ल फॉम
A) GENERAL CONDITIONS OF CONTRACT General Conditions
B) GENERAL CRITERIA OF CONTRACT of Contract
C) GENERAL CONTRACT CONDITIONS
D) NONE
What do we call An agreement enforceable by Law ?
A) TENDER
B) CONTRACT Contract
C) ACT
D) LAW
/
हम कानून ारा लागू एक समझौते को या कहते ह?
82 ए) िनिवदा
ख) अनुबधं अनुबंध
सी) अिधिनयम
D) LAW
What do we call The tenders which are receive after opening of tenders?
A) DELAYED TENDERS
B) REJECTED TENDERS Late Tender
C) LATE TENDERS
D) NONE
/
टडर खोलने के बाद हम जो िनिवदाएँ ा होती ह, उ ह हम या कहते ह?
83 ए) िवलंिबत िनिवदाएं
ख) अ वीकृ त िनिवदाएं लेट टडस
ग) लेट टडस
D) कोई नह
Full form of EMD
A) EARLY MONEY DEPOSIT
B) EASY MONEY DEPOSIT
C) EARNEST MONEY DEPOSIT
D) EARNED MONED DEPOSIT
EMD का पूण प
A) EARLY MONEY DEPOSIT
84 Earnest Money
B) EASY MONEY DEPOSIT
C) EARNEST MONEY DEPOSIT Deposit
D) EARNED MONED DEPOSIT

Engineering (Works) Question Bank 2020 Page 54


ZRTI Bhusawal

In stores what do well that contracts where quantity is not specified?


A) PETTY CONTRACT
B) ZONAL CONTRACT Rate Contract
C) RATE CONTRACT
D) NONE
/
टोर म उस कॉ ै ट को या कहते ह जहां मा ा िनिद नह है?
85 A) पेटी अनुबंध
B) ज़ोनल अनुबंध रे ट अनुबंध
C) रेट अनुबंध
D) कोई नह
Which deposits are to be paid by contractors is taken for the due
fulfilment of contract?
A) EAREST
B) SECURITY
C) PERFORMANCE Security
D) ADVANCE

अनुबंध की देय पूित के िलए ठे केदार ारा कौन सी जमा रािश का भुगतान िकया /
जाना है?
86 A) बयाना
B) सुर ा सुर ा
C) दशन
D) अि म
The amount of Earnest Money to be deposited with tender is what
percentage of tender value of work?
A) 5%
B) 10%
C) 3%
D) 2%

टडर के साथ जमा की जाने वाली बयाना की रािश, काय के टडर मू य का िकतना
ितशत है?
87 A) 5%
B) 10% 2%
C) 3%
D) 2%
When the period of Zonal contract start each year. 1st July to 30th
A) 1ST JANUARY TO 31ST DECEMBER June
B) 1ST APRIL TO 31ST MARCH
C) 1ST OCTOBER TO 30TH SEPTEMBER
D) 1ST JULY TO 30TH JUNE /

कब हर साल ज़ोनल अनुबंध की अविध शु होती है।


88 A) 1st जनवरी से 31th िदस बर 1st जूलाई 30th जून
बी) 1st अ लै से 31th माच तक तक
C) 30 िस मबंर को 1st अ टूबर
th

D) 1st जूलाई 30th जून तक

Engineering (Works) Question Bank 2020 Page 55


ZRTI Bhusawal

What do we call when disputes are Resolved by non-judicial means?


A) ARBITRATION
B) APPELATE
C) QUASI JUDICIAL Arbitration
D)NONE

जब गैर- याियक साधन ारा िववाद को हल िकया जाता है तो हम उसे या कहते /


ह?
89 क) म य थता
बी) अपीलीय म य थता
C) ासी यूिडिशयल
डी) कोई नह

SURVEYING
The two point problem and three point problem are methods for what?
A) INTERSECTION
B) ORIENTATION
C) RESECTION & ORIENTATION
D) NONE

दो िबदु सम या और तीन िबदु सम या िकसके िलए तरीके ह?


90 ए) अंतःकरण RESECTION &
बी) अिभिव यास ORIENTATION
ग) लकीर और अिभिव यास
D) कोई नह
In Levelling Operation, if the first reading is more than the second, it
represents what?
A) RISE
B) FALL
C) SAME LEVEL
D) NONE

लेविलग ऑपरेशन म, यिद पहला रीिडग दूसरे से अिधक है, तो यह या दशाता है?
91 क) ऊचाई
ख) गेहरई RISE
सी) एक ही तर
D) कोई नह
Bowditch Rule is applied to a closed traverse for adjustment of which
error?
A) INSTRUMENTAL
B) HUMAN
C) CLOSING
D) NONE
92
िकस ुिट के समायोजन के िलए बॉि डच िनयम को लोज ॉव पर लागू िकया जाता CLOSING ERROR
है?
क) साधन

Engineering (Works) Question Bank 2020 Page 56


ZRTI Bhusawal

ब) मन
ग) लोिजग
D) कोई नह
What do we call The last reading of Levelling?
A) FORESIGHT FORESIGHT
B) BACKSIGHT
C) INTERMEDIATE
D) NONE /
लेविलग की आिखरी रीिडग को हम या कहते ह?
93 A) दूरदिशता
B) बैकसाइट दूरदिशता
C) अंतिरम
D) कोई नह
Which problem can be solved by Lehman's method.
A) TWO Point problem
B) THREE Point problem
C) BOTH (A) & (B) Point problem
D) NONE
THREE Point
लेहमन की िविध से िकस सम या का समाधान िकया जा सकता है। problem /
A) दो िबदु सम या
94 B) तीन िबदु सम या
C) BOTH (A) और (B) तीन िबदु सम या
D) कोई नह

In chain surveying the field work is limited to ________________


measurements.
95
A)LINEAR
B)ANGULAR LINEAR
C)BOTH LINEAR & ANGUAR
D) NONE

Engineering (Works) Question Bank 2020 Page 57


ZRTI Bhusawal

Answer Key Spell – 1 paper 2ND


1 D 26 D 51 C 76 B
2 C 27 B 52 A 77 C
3 A 28 B 53 A 78 A
4 D 29 D 54 A 79 B
5 D 30 B 55 B 80 D
6 D 31 A 56 D 81 A
7 C 32 A 57 C 82 B
8 B 33 A 58 A 83 C
9 B 34 C 59 C 84 C
10 A 35 B 60 A 85 C
11 A 36 C 61 A 86 B
12 D 37 A 62 D 87 D
13 D 38 B 63 C 88 D
14 C 39 A 64 D 89 A
15 B 40 C 65 A 90 C
16 D 41 C 66 A 91 A
17 C 42 A 67 A 92 C
18 D 43 D 68 C 93 A
19 A 44 B 69 C 94 B
20 C 45 C 70 D 95 A
21 D 46 A 71 D
22 A 47 A 72 B
23 B 48 A 73 D
24 D 49 A 74 A
25 B 50 C 75 D

Engineering (Works) Question Bank 2020 Page 58


ZRTI Bhusawal

Short Answer
Sr No. Project development process
96 Objectives of traffic survey
97 Completion report
98 Project development process
99 Techno-economic survey

Engineering survey
100 What is reconnaissance survey, describe it.
101 What is final location survey and describe it.
102 Characteristics of project area in engineering survey.
103 Preliminary survey and describe it.

Soil Mechanics
104 Write a short note on Bulking of Sand
105 Define (Any 5)
1) OMC
2) Water content
3) Void Ratio
4) Permeability
5) Plasticity Index
6) Coefficient of Index
7) Coefficient of Uniformity
8) Degree of Saturation
106 Differentiate between Compaction and Consolidation of Soil
107 Write a short note on Atterberg Limit
108 Write a short note on Bearing Capacity of soil

SURVEYING
109 Theodolite
110 Define Traverse. Differentiate between open & closed traverse
111 Describe the following terms
a) Bearing
b) Azimuth
c) Magnetic Bearing

Engineering (Works) Question Bank 2020 Page 59


ZRTI Bhusawal

d) Magnetic Declination
e) Latitude & Departure
112 Write a short note on Two Point Problem
113 Define Contours& write characteristics of Contour Line

ESTIMATE AND CONTRACTS


114 EMD & Security deposit
115 Explain procedure for recording of measurements in MB
116 Open Tender
117 Lump sum Contract
118 Deposit Work

New Building Materials


119 use of light weight concrete

120 What is concrete inter locking paver block

121 Uses of hard ply and soft ply wood

122 What is vacuum dewatering concrete

123 Fly ash bricks its uses and process

Investment planning and work budget


124 Various stages of investment planning and work programme

125 Integrated budget

126 Distribution of funds by the railway

Long Answer
Sr No. Project development process
127 Classification of survey
128 Terms of reference and estimates of gross earning of new line project
129 Assessment of goods traffic earning and expenses
130 Account verification of completion report
131 Opening of goods traffic in case of commissioning of new line

Engineering survey
132 Techno economic survey report

Engineering (Works) Question Bank 2020 Page 60


ZRTI Bhusawal

133 Standard of construction in project report


134 Route selection in railway project.

Soil Mechanics
135 Plate Load Test
Write various tests to calculate moisture content of soil. Describe any two
136 in detail.
137 Differentiate between
a) Shallow & Deep foundation
b) Void Ratio & Porosity
138 Describe various types of Rollers
139 Write a note on Indian Standard Soil Classification System (ISSCS)

SURVEYING
140 write a short note on Plane Table Surveying
141 Define (Any 5)
a) Bench Mark
b) Line of Collimation
c) Mean Sea Level
d) Reciprocal Levelling
e) Transiting
f) Closing errors
g) Offsets
h) Swinging the Telescope
i) Turning Point
j) Fly Levelling
k) Cross Staff
l) Chain Surveying
142 Describe various methods of Contouring
143 Write down various properties of Contour

ESTIMATE AND CONTRACTS


144 Describe various types of Estimates
145 Arbitration
146 describe various types of Contracts
147 Describe various classes of Tenders

Engineering (Works) Question Bank 2020 Page 61


ZRTI Bhusawal

148 Write various precautions to be observed while opening the tenders

New Building Materials


149 Various types of tiles and their uses

150 Various types of ceiling material and their use


What is auto clave block where it is used and effect of environmental
151 friendly
152 Types of laminates and their uses

153 Types of glass and their uses

Investment planning and work budget


154 Preparation of works programme

155 Financing of work budget

156 Scrutiny of scheme before preparation of works programme

157 Final works programme

Engineering (Works) Question Bank 2020 Page 62


ZRTI Bhusawal

Questions (Spell 2)
Paper-1
Objectives
Sr.No. Turn outs Answer
1. What is the Maximum degree of turn outs that can be laid in a straight 8 degree
section? /
(a)10 degree 8 िड ी
(b) 4 degree
(c) 8.5 degree
(d) 8 degree
टन आउट की अिधकतम िड ी या है िजसे एक सीधे खंड म रखा जा सकता है?
(ए) 10 िड ी
(b) 4 िड ी
(c) 8.5 िड ी
(d) 8 िड ी
2. Radius of turnout that can be laid in straight track is 218 m. Minimum
(a) maximum /
(b) minimum यूनतम
(c) data insufficient
(d) none of the above
टनआउट की ि या जो सीधे ैक म रखी जा सकती है, 218 मीटर है।
(a) अिधकतम
(b) यूनतम
(c) डेटा अपया
(d) उपरो म से कोई नह
3. What is the Minimum radius of turnout that can be laid in a straight track? 218 m
(a) 218
(b) 437.5
(c) 175
(d) 875

टनआउट का यूनतम ि या या है िजसे एक सीधे ैक म रखा जा सकता है?


(a) 218
(b) 437.5
(c) 175
(d) 875
4. In a straight line what is the maximum degree of turn outs In case 1 in 8.5? 8
(a) 8
(b) 10
(c) 4
(d) none of the above

एक सीधे ैक म 8.5 म 1 का टन-आउट की अिधकतम िड ी या है?


(a) 8

Engineering (Works) Question Bank 2020 Page 63


ZRTI Bhusawal

(b) 10
(c) 4
(d) उपरो म से कोई नह
5. In a straight track maximum degree of turn out in the case of 1 in 12. 4
(a) 8
(b) 10
(c) 4
(d) None of the above.

एक सीधे ैक म 12 म 1 का टन-आउट की अिधकतम िड ी या है?


(a) 8
(b) 10
(c) 4
(d) उपरो म से कोई नह
6. As per RDSO, what is the speed in case of 1 in 8.5 turnout with a straight 10
switch.
(a) 25
(b) 10
(c) 15
(d) 30
आरडीएसओ के अनुसार, एक सीधे ि वच के साथ 8.5 म 1 टन-आउट के मामले म गित
या है।
(a) २५
(b) १०
(c) 15
(d) 30
7. As per RDSO guide lines the permissible speed in case of 1 in 8.5 turnout 15
with curve switch?
(a) 25
(b) 10
(c) 15
(d) none of the above

RDSO के अनुसार कव ि वच टन-आउट के साथ 8.5 म 1 के मामले म अनुमेय गित है?


(िकमी ित घंटे)
(a) 25
(b) 10
(c) 15
(d) उपरो म से कोई नह
8. As per RDSO guide lines the permissible speed in case of 1 in 12 turn-out 15
with straight switch?
(a) 15
(b) 10
(c) 20
(d) none of the above

आरडीएसओ के अनुसार सीधे ि वच टन-आउट के साथ 12 म 1 के मामले म अनुमत


गित?
(a) 15

Engineering (Works) Question Bank 2020 Page 64


ZRTI Bhusawal

(b) १०
(c) 20
(d) उपरो म से कोई नह
9. As per RDSO guide lines the permissible speed in case of 1 in 12 turnout 30
with curve switch?
(a) 30
(b) 45
(c) 25
(d) none of the above

RDSO के अनुसार व ि वच टन-आउट के साथ 12 म से 1 के मामले म अनुमत गित?


(a) 30
(b) 45
(c) 25
(d) उपरो म से कोई नह
10. In the case of similar flexure Turn-out the relation between Dt, Ds and Dm Dt=Dm+Ds
when Turn-out curve tracks is from inside the main line curve?
(a) Dt=DmxDs
(b) Dt=Dm/Ds
(c) Dt=Dm+Ds
(d) Dt=Dm-Ds
इसी तरह के ले सचर टन-आउट के मामले म, मु य लाइन व के अंदर से टन-आउट
व ैक होने पर Dt, Ds और Dm के बीच या संबध ं है?
(a) Dt=DmxDs
(b) Dt=Dm/Ds
(c) Dt=Dm+Ds
(d) Dt=Dm-Ds
11 The effective radius of turn-out is given by which formula in the case of Rt=Rm x
similar flexural turn-out, When turn-out is from inside the main line curve? Rs/(Rm+Rs)
(a) Rt=Rm x Rs/(Rm-Rs)
(b) Rt=Rm - Rs/(Rm+Rs)
(c) Rt=Rm x Rs/(Rs)
(d) Rt=Rm x Rs/(Rm+Rs)

टन-आउट का भावी ि या इसी तरह के लचीले टन-आउट के मामले म िकस सू


ारा िदया जाता है, जब टन-आउट मु य लाइन व के अंदर से होता है?
(a) Rt=Rm x Rs/(Rm-Rs)
(b) Rt=Rm - Rs/(Rm+Rs)
(c) Rt=Rm x Rs/(Rs)
(d) Rt=Rm x Rs/(Rm+Rs)
12. When the turn-out curves takes off from outside the main curve the Rt=Rm x Rs/(Rs-
effective radius of turn-out in case of similar flexure turn-out is given by Rm)
which relation?
(a) Rt=Rm x Rs/(Rm+Rs)
(b) Rt=Rm + Rs/(Rm-Rs)
(c) Rt=Rm x Rs/(Rs-Rm)
(d) Rt=Rm /(Rm+Rs)

जब टन-आउट कव मु य व के बाहर से लेते ह, तो समान ले सचर टन-आउट के

Engineering (Works) Question Bank 2020 Page 65


ZRTI Bhusawal

मामले म टन-आउट का भावी ि या िकस सू ारा िदया जाता है?


(a) Rt=Rm x Rs/(Rm+Rs)
(b) Rt=Rm + Rs/(Rm-Rs)
(c) Rt=Rm x Rs/(Rs-Rm)
(d) Rt=Rm /(Rm+Rs)
13. In the case of contrary flexure turn-out the effective radius of t/out is given Rt=Rm x Rs/(Rm-
which formula? Rs)
(a) Rt= Rs/(Rm+Rs)
(b) Rt=Rm x Rs/(Rm-Rs)
(c) Rt=Rm - Rs/(Rm+Rs)
(d) none of the above

िवपरीत ले सचर टन-आउट के मामले म टन-आउट का भावी ि या िकस सू म


िदया गया है?
(a) Rt= Rs/(Rm+Rs)
(b) Rt=Rm x Rs/(Rm-Rs)
(c) Rt=Rm - Rs/(Rm+Rs)
(d) none of the above
14. Full-form of TTS? Theoretical toe of
(a) Theoretical toe at switch switch
(b) total toe of switch
(c) Theoretical toe of switch
(d) Theoretical turn- out of switch

टीटीएस का पूण प?
(a) Theoretical toe at switch
(b) total toe of switch
(c) Theoretical toe of switch
(d) Theoretical turn- out of switch
15. Full form of ATS? Actual toe of
(a) acting toe of switch switch
(b) actual thickness of switch
(c) accidental toe of switch
(d) Actual toe of switch

ATS का पूण प?
(a) acting toe of switch
(b) actual thickness of switch
(c) accidental toe of switch
(d) Actual toe of switch
16 Full form of JOH……………….. Junction of heads
(a)joint of head-way
(b) Joint of head
(c) Junction of heads
(d) junction of head-way

JOH का पूण प?
(a)joint of head-way
(b) Joint of head
(c) Junction of heads
(d) junction of head-way

Engineering (Works) Question Bank 2020 Page 66


ZRTI Bhusawal

17 Full form of ANC……………….. Actual nose of


(a) Acting nose of crossing crossing
(b) accidental nose of crossing
(c) Actual nose of crossing
(d) active nose of crossing
ANC का पूण प?
(a) Acting nose of crossing
(b) accidental nose of crossing
(c) Actual nose of crossing
(d) active nose of crossing
18 How many number approach sleepers are designed to roll out cant from 1 4
in 20 to level
(a) 8
(b) 6
(c) 4
(d) 0

कटर को 20 म से 1 तर तक रोल आउट करने के िलए िकतने लीपस िडज़ाइन िकए


गए ह?
(a) 8
(b) 6
(c) 4
(d) 0
19 How many number of exit sleepers are designed to roll out cant from 1 in 4
20 to level?
(a) 8
(b) 6
(c) 4
(d) 0

20 म से 1 तर तक कट को बाहर िनकालने के िलए िकतने एि जट लीपस िडज़ाइन


िकए गए ह?
(a) 8
(b) 6
(c) 4
(d) 0
20 Total number of sleepers required in 1 in 8.5 turn-out, In case of PSC 67
sleepers?
(a) 96
(b) 69
(c) 76
(d) 67

PSC लीपस के मामले म 8.5 म से 1 टन-आउट म आव यक लीपर की कु ल सं या?


(a) 96
(b) 69
(c) 76
(d) 67
21 Total number of sleepers required in 1 in 12 turn-out, In case of PSC 96
sleepers?

Engineering (Works) Question Bank 2020 Page 67


ZRTI Bhusawal

(a)96
(b) 69
(c) 76
(d) 67

पीएससी लीपस के मामले म 12 म से 1 म टन-आउट की आव यकता है?


(a)96
(b) 69
(c) 76
(d) 67
22. Full form of HOS is…………….. Heel of switch
(a) height of switch
(b) heal of switch
(c) Heel of switch
(d) head of switch

एचओएस का पूण प?
(a) height of switch
(b) heal of switch
(c) Heel of switch
(d) head of switch

CRS sanction
23. CRS sanction is given in the chapter of IRPWM? 13
(a) 17
(b) 13
(c) 12
(d) 8

आई.आर.पी.ड यू.एम. के िकस अ याय म सीआरएस की मंजूरी दी गई है?


(a) 17
(b) 13
(c) 12
(d) 8
CRS stands for……………………………. Commissioner of
(a) Commissioner of railway safety railway safety
(b) commission of railway safety
(c) Commercial of railway safety
(d) central of railway safety
24 CRS का पूण प?
(a) Commissioner of railway safety
(b) commission of railway safety
(c) Commercial of railway safety
(d) central of railway safety
CCRS stands for …………………………… Chief
25 (a) Chief Commissioner of railway safety commissioner of
(b) Chief commission of railway safety railway safety
(c) Chief Commercial of railway safety
(d) Chief central of railway safety

Engineering (Works) Question Bank 2020 Page 68


ZRTI Bhusawal

CCRS का पूण प?
(a) Chief Commissioner of railway safety
(b) Chief commission of railway safety
(c) Chief Commercial of railway safety
(d) Chief central of railway safety
CRS comes under the which ministry? Civil aviation
(a)ministry of railway
(b) ministry of home affairs
(c) civil aviation
(d)ministry of defence

26 सीआरएस िकस मं ालय के अंतगत आता है?


(a) रेल मं ालय
(b) गृह मामल का मं ालय
(c) नागिरक उ यन
(d) र ा मं ालय
CRS are empowered by which article number of Indian railway Act 1989? 24
(a) 42
(b) 24
(c) 13
(d) none of the above

सीआरएस को भारतीय रेलवे अिधिनयम 1989 के िकस अनु छेद सं या ारा अिधकार
27 ा है?
(a) 42
(b) 24
(c) 13
(d) उपरो म से कोई नह
The head quarter of CCRS? Lucknow
(a) Kolkata /
(b) Mumbai लखनऊ
(c) Delhi
(d) Lucknow

28 CCRS का हेड ाटर?


(a) कोलकाता
(b) मुंबई
(c) िद ली
(d) लखनऊ
In the case of heavy re-gardering of running line excess of how many mm 500
requires CRS sanction
(a) 5000
(b) 5
(c) 500
29 (d) 50

रिनग लाइन म भारी री-गािडग िकतने िममी से अिधक के मामले म सीआरएस की


मंजूरी की आव यकता होती है ?
(a) 5000

Engineering (Works) Question Bank 2020 Page 69


ZRTI Bhusawal

(b) 5
(c) 500
(d) 50
Permanent diversion more than how many km in length without any 2
station will require CRS sanction.
(a)2.5
(b)20
(c) 2
(d) 50

िबना िकसी टेशन के िकतने िकमी की लंबाई म थायी डायवजन सीआरएस की मंजरू ी
30 की आव यकता होगी।
(a)2.5
(b)20
(c) 2
(d) 50
Temporary diversion of more than how many km in length with station will Irrespective of
require CRS sanction? length
(a) 2 /
(b) 13 लंबाई चाहे जो भी
(c) 12 हो
(d) Irrespective of length

टेशन के साथ िकतने िकमी से अिधक की अ थायी डायवजन के िलए सीआरएस


31 वीकृ ित की आव यकता होगी?
(a) 2
(b) 13
(c) 12
(d) लंबाई चाहे जो भी हो
Which officer should submit application to CRS for work affecting running JAG
line? /
(a) Junior scale जे ए जी
(b) HAG
(c) SAG
(d) JAG
रिनग लाइन को भािवत करने वाले काय के िलए िकस अिधकारी को सीआरएस को
32 आवेदन तुत करना चािहए?
(a) जुिनयर के ल
(b) एच ए जी
(c) एस ए जी
(d) जे ए जी
How many days in advance an application should be send to CRS for works 30
requiring CRS sanction?
(a) 60
(b) 45
33 (c) 14
(d) 30
सीआरएस अनुमोदन की आव यकता वाले काय के िलए एक आवेदन अि म म िकतने
िदन के पहेले सीआरएस को भेजा जाना चािहए?
(a) 60

Engineering (Works) Question Bank 2020 Page 70


ZRTI Bhusawal

(b) 45
(c) 14
(d) 30
The prescribed form for application to CRS is given in which annexure of 13/2
IRPWM?
(a) 13/4
(b) 13/3
(c) 13/1
(d) 13/2

सीआरएस के िलए आवेदन के िलए िनधािरत फॉम आईआरपीड यूएम के िकस


34 पिरिश म िदया गया है?
(a) 13/4
(b) 13/3
(c) 13/1
(d) 13/2
If inspection is not to be done by CRS as intimated in correspondence with Safety, ADEN,DEN
the work can be commence by submission of which certificate given by
whom and countersigned by whom before opening or commencement.
(a) Safety, ADEN,DEN
(b) Safety, SSE,ADEN
(c) Safety, DEN,CE
(d) Safety, CE,CRS

यिद िनरी ण सीआरएस ारा नह िकया जाना है, जैसा िक काय के साथ प ाचार म
सूिचत िकया गया है, तो िकसके ारा िदए गए िकस माण प को तुत करने पर
शु िकया जा सकता है और िकसके जवाबी ह ता र िकए जा सकते ह, उसे खोलने या
35 शु करने से पहले।
(a) Safety, ADEN,DEN
(b) Safety, SSE,ADEN
(c) Safety, DEN,CE
(d) Safety, CE,CRS
If inspection is to be done by CRS as intimates in correspondence letter 14
than CRS should be intimated by at least how many days before it is
approved to open it.
(a) 60
(b) 31
(c) 30
(d) 14

यिद प ाचार प म सूिचत िकया जाता है िक सीआरएस ारा िनरी ण िकया जाना
है, तो सीआरएस को कम से कम िकतना िदन पहले इसे खोलने के संबंध म सूिचत
36 करना चािहए।
(a) 60
(b) 31
(c) 30
(d) 14

Engineering Indicators and Emergency Protection

Engineering (Works) Question Bank 2020 Page 71


ZRTI Bhusawal

In which colour Caution indicator board is painted? Yellow and black


(a)yellow and black
(b) black and yellow
(c) white and yellow
(d) white and black

37 िकस रं ग म सावधानी सूचक बोड िचि त है?


(a) पीला और काला
(b) काला और पीला
(c) सफे द और पीले
(d) सफे द और काला
Caution indicator shall be provided at how many meters in rear of speed 600,1200
indicator and at how many Meters when the trains are required to stop.
(a)1200,800
(b) 600,1200
(c) 600,800
(d) 800,1200

पीड इं िडके टर के िकतने मीटर पीछे और िकतने मीटर म जब गािड़य को रोकना


38 आव यक हो तो सावधानी सूचक बोड दान िकया जाएगा?
(a) 1200,800
(b) 600,1200
(c) 600,800
(d) 800,1200
Speed indicator board is in which shape and base colour and figure are in Equilateral
which colour indicating the speed. triangle, yellow ,
(a) Equilateral triangle, yellow , black black
(b) circle, yellow and black /
(c) rectangle, yellow and black समबा ि भुज,
(d) square ,yellow and black पीला, काला

पीड इंिडके टर बोड िकस आकार और आधार रं ग का है और आंकड़ा िकस रं ग म है जो


39 गित का संकेत देता है।
(a) समबा ि भुज, पीला, काला
(b) वृ , पीला और काला
(c) आयत, पीला और काला
(d) वग, पीला और काला
What is the Shape of stop indicator board? Rectangular
(a) circular /
(b) square आयताकार
(c) rectangular
(d) octagonal

40 टॉप इं िडके टर बोड की आकृ ित या है?


(a) वृ ाकार
(b) वग
(c) आयताकार
(d) अ कोणीय

Engineering (Works) Question Bank 2020 Page 72


ZRTI Bhusawal

What is the Size of stop indicator in mm? 1400 x 400


(a) 1400x200
(b) 1400x1200
(c) 400x800
(d) 1400x400
िममी म टॉप इंिडके टर का आकार या है?
41 (a) 1400x200
(b) 1400x1200
(c) 400x800
(d) 1400x400

Full form of BSLB? Block Section


(a) Back Section Limit Board Limit Board
(b) Before Section Limit Board
(c) Block Section Limit Board
(d) below Section Limit Board

BSLB का फु ल फॉम
42 (a) Back Section Limit Board
(b) Before Section Limit Board
(c) Block Section Limit Board
(d) below Section Limit Board

In caution indication of two hole of 130mm diameter are meant for Yellow light
showing what at night? /
(a) double yellow पीली रोशनी
(b) red light
(c) double red light
(d) yellow light

130 िममी ास के दो छेद के सावधानी संकेत म रात म या िदखाना है?


43 (a) डबल पीला
(b) लाल ब ी
(c) डबल रे ड लाइट
(d) पीली रोशनी

In case of emergency protection where shall the Right hand signal? 30 mtr in rear of
(a) 1200m in rear of the spot the spot
(b) 600m in rear of the spot /
(c) 800m in rear of the spot घटना थल के पीछे
(d) 30 mtr in rear of the spot 30 मीटर

44 आपातकालीन सुर ा के मामले म राइट हड िस ल कहां होगा?


(a) मौके के पीछे म 1200 मी
(b) मौके के पीछे 600 मी
(c) घटना थल के पीछे 800 मी
(d) घटना थल के पीछे 30 मीटर

Engineering (Works) Question Bank 2020 Page 73


ZRTI Bhusawal

Where the Flag man will take stand from the last detonator Not less than 45
(a)30m m
(b) less than 45m /
(c) Not less than 45 m 45 मीटर से कम
(d) 5m नह

45 लैग मैन को अंितम डेटोनेटर से कहां खड़ा होना चािहए


(a) 30
(b) 45 मी से कम है
(c) 45 मीटर से कम नह
(d) 5 मी
Work when are completed by sunset of the day of commencement are Short duration /
called what type of works. छोटी अविध
(a)half day duration
(b) short duration
(c) long duration
(d) None of these.

जब काम शु होने के िदन के सूया त तक पूरा हो जाता है तो उसे िकस कार के काय
46 कहा जाता है।
(ए) आधे िदन की अविध
(b) छोटी अविध
(c) लंबी अविध
(d) इनम से कोई नह ।

Horizontal And Vertical Curves


What is the maximum degree of curve for BG curved track?
(a)8
(b)12
(c) 4
(d)10

47 बीजी घुमावदार ैक के िलए व की अिधकतम िड ी या है?


(a)8 10 Degree
(b)12
(c) 4
(d)10
What is the Maximum cant excess permitted on BG route are
(a)75
(b)100
(c) 125
(d)65

48 बीजी माग पर अिधकतम अितिर कटन की अनुमित या है?


(a)75 75mm
(b)100
(c) 125
(d)65

Engineering (Works) Question Bank 2020 Page 74


ZRTI Bhusawal

What is the Radius of 3.5 degree curve?


(a) 550
(b) 440
(c) 500
(d) 375

49 3.5 िड ी व का ि या या है?
(a) 550 500m
(b) 440
(c) 500
(d) 375
What is the chord length for measuring Versine of a curve?
(a)30.5
(b)20
(c) 15
(d)10
50 एक व के विसन को मापने के िलए जीवा की लंबाई या है?
(a)30.5 20m
(b)20
(c) 15
(d)10
Check rail should be provided on the inside of the which rail of the curve. INNER
(a)INNER
(b)OUTER
(c) GUARD
(d)INNER AND OUTER BOTH /

51 व के िकस रेल के अंदर चेक रेल दान की जानी चािहए।


(a) आंतिरक
आंतिरक
(b) बाहरी
(c) गाड
(d) आंतिरक और बाहरी दोन
The formula for theoretical versine:
2
(a)125(C /R)
2
(b)12.5(C /R )
3
(c) 12.5(C /R)
(d)125 C/R
52 व के सै ांितक छं द का सू या है:
(a)125(C2/R) 2
125(C /R)
(b)12.5(C2/R )
(c) 12.5(C3/R)
(d)125 C/R
What is the value of super elevation at the beginning of transition curve? Zero
(a) ZERO
53 (b) EQUAL TO ACTUAL CANT
(c) HALF OF ACTUAL CANT
/
(d) 100

सं मण व की शु आत म सुपर ऐिलवेशन का मू य या है?

Engineering (Works) Question Bank 2020 Page 75


ZRTI Bhusawal

(A) शू य शू य
(B) के कायकलाप के िलए आव यक
(C) 100 वष का अिधकार
(D) 100
The super elevation remains constant along which curve?
(a) Translation
(b) Circular
(c) Both
(d) None
54 सुपर ऐिलवेशन िकस व मे ि थर रहता है?
(A) अनुवाद
CIRCULAR
(B) पिरप
(C) दोन
(D) कोई नह
Formula for calculating super elevation?
2
(a) (GV )/(125R)
2
(b) (GV )/(127R)
2
(c) (GV )/(R)
(d)(GV)/(127R)

55 सुपर ऊंचाई की गणना के िलए फॉमूला?


(a) (GV2)/(125R) 2
(GV )/(127R)
(b) (GV2)/(127R)
(c) (GV2)/(R)
(d)(GV)/(127R)
What is the value of G in super elevation?
(a)1673 mm 1750mm
(b)1676 mm
(c) 1750 mm
(d) None
/
सुपर एिलवेशन म G का मान या है?
56 (A) १६ c३ िममी
(B) १६ ७६ िममी
१७५० िममी
(C) १ ७५० िममी
(D) कोई नह

What is the minimum radius of the vertical curve on "A" route? 4000m
(a) 4000 m
(b) 3000 m
(c) 175 m
(d) 2500 m /

57 "ए" माग पर ऊ वाधर व का यूनतम ि या या है?


(a) 4000 मीटर
4000 मीटर
(b) 3000 मीटर
(c) 175 मीटर
(d) 2500 मीटर

Engineering (Works) Question Bank 2020 Page 76


ZRTI Bhusawal

Components of P.way
1in20
What is the Cant provided in sleepers?
(a) 1in100
(b) 1in200
(c) 1in260 /
(d) 1in20

58 लीपर म दान की गई कट या है?


(a) 100 म 1 20 म 1
(b) 200 म 1
(c) 260 म 1
(d) 20 म 1
What is the Maximum length of LWR? One Block Section
(a) 250mt
(b) 65mt
(c) 39mt
(d) One Block Section /

59 एल यलू आर की अिधकतम लंबाई या है?


(a) 250mt वन लॉक से शन
(b) 65mt
(c) 39mt
(d) वन लॉक से शन
What is the Ideal temperature range for maintenance of LWR?
(a) td-10 to td +30
(b) td +20 to td -30
(c) td +10 to td -30
(d) td +10 to td -20

एल यलू आर के रखरखाव के िलए आदश तापमान सीमा या है?


(a) td-10 to td +30
60
(b) td +20 to td -30 td+10 to td-30
(c) td +10 to td -30
(d) td +10 to td -20
What is the weight of concrete sleeper?
(a) 187 Kg
(b) 287 Kg
(c) 250 Kg
61 (d) NONE
287 Kg.
कं ीट लीपर का वजन िकतना है?
(a) 187 Kg
(b) 287 Kg

Engineering (Works) Question Bank 2020 Page 77


ZRTI Bhusawal

(c) 250 Kg
(d) NONE
60 Cms.
What is Spacing between sleepers when sleeper density is 1660/km?
(a) 65Cms
(b) 30Cms
(c) 60Cms /
(d) 40Cms

62 लीपर का घन व 1660 / िकमी होने पर लीपस के बीच अंतर होता है?


(a) 65 से. मी. 60 से. मी.
(b) 30 से. मी.
(c) 60 से. मी.
(d) 40 से. मी.
What do we call Wagon used for carriage of ballast?
(a) BOXN
(b) BTPN
(c) BCNL
(d) BOBYN

63 िग ी की गाड़ी के िलए इ तेमाल होने वाले वैगन को हम या कहते ह?


(a) BOXN BOBYN
(b) BTPN
(c) BCNL
(d) BOBYN
If Spacing between sleepers is 65cms than what is the sleeper density?
(a) 1330/KM
(b) 1540/KM
(c) 1660/KM
(d) NONE

64 यिद लीपर के बीच की दूरी 65 से. मी. है, तो लीपर का घन व या है?


(a) 1330 / KM 1540/Km
(b) 1540 / KM
(c) 1660 / KM
(d) NONE
How many Maximum numbers of sleepers which can be opened at time of
maintenance of LWR?
(a) 1
(b) 30
(c) 15
(d) 60

65 एल यलू आर के रखरखाव के समय िकतने लीपर को खोला जा सकता है?


(a) 1 30
(b) 30
(c) 15
(d) 60

Engineering (Works) Question Bank 2020 Page 78


ZRTI Bhusawal

What is the minimum Spacing between 'Distance Piece' on platform line?


(a) 30 Mts
(b) 20 Mts
(c) 15 Mts
(d) 45 Mts

66 लेटफ़ॉम लाइन पर 'िड टस पीस' के बीच यूनतम अंतर या है?


(a) 30 Mts 30 Mts.
(b) 20 Mts
(c) 15 Mts
(d) 45 Mts
Number of grooves on top of 60kg Rubber Pad?
(a) 5
(b) 6
(c) 7
(d) 9

67 60 िकलो रबर पैड के शीष पर खांचे की सं या?


(a) 5 6
(b) 6
(c) 7
(d) 9

Transportation
LEFT SIDE
Generally signals are provided at which side of line.
(a) BOTH SIDE
(b) LEFT SIDE
(c) RIGHT SIDE /
(d) NONE
68 आम तौर पर िस ल लाइन के िकस तरफ िदए जाते ह।
(ए) दोन साइड
बाएँ साइड
(बी) बाएँ साइड
(सी) दाएँ साइड
(डी) कोई नह
What is the shape of distant signal in semaphore signalling system. Fish Tailed
(a) CIRCULAR
(b) RECTANGULAR
(c) FISH TAILED
(d) NONE /

69 सेमाफोर िस िलग णाली म दूरी के संकेत का आकार या है।


(ए) गोलाकार आकार
फीस-टेल
(बी) आयताकार
(सी) फीस-टेल
(डी) कोई नह

Engineering (Works) Question Bank 2020 Page 79


ZRTI Bhusawal

Traffic gate is situated between which signals of station


(a) FIRST STOP
(b) OUTERMOST STOP
(c) DISTANT
(d) STARTER

70 ैिफ़क गेट टेशन के कौन से संकेत बीच ि थत होता है? OUTERMOST


(a) FIRST STOP STOP
(b) OUTERMOST STOP
(c) DISTANT
(d) STARTER
Neutral zone is available at which type of station. A class station
(a) A CLASS
(b) B CLASS
(c) C CLASS
(d) NONE /

71 यू ल जोन िकस टेशन पर उपल ध है।


(ए) ए लास
ए लास
(बी) बी लास
(सी) सी लास
(डी) कोई नह
There are how many systems of train working adopted on Indian Railways.
(a) 2
(b) 4
(c) 6
(d) 5
72 भारतीय रेलवे म ेन के िकतने िस टम अपनाए गए ह।
(a) 2 6
(b) 4
(c) 6
(d) 5
Temporary engineering fixed signal shall be used at how many distances to
protect train?
(a) 500 m
600m
(b) 400 m
(c) 1200 m
(d) 600 m
/
अ थाई इं जीिनयिरग िनि त िस ल का उपयोग ेन की सुर ा के िलए िकतनी दूरी पर
73 िकया जाएगा?
(a) 500 मीटर
600 मीटर
(b) 400 मीटर
(c) 1200 मीटर
(d) 600 मीटर
74 Semi-Automatic signal is distinguished by which illuminated letter 'A'
against black background. WHITE
(a) YELLOW
(b) WHITE
(c) RED

Engineering (Works) Question Bank 2020 Page 80


ZRTI Bhusawal

(d) GREEN

अध- वचािलत िस ल को काले रं ग की पृ भूिम के िखलाफ िकस रं ग के बु अ र 'ए'


से अलग िकया जाता है।
(a) YELLOW
(b) WHITE
(c) RED
(d) GREEN
Automatic signal shows which light in normal position?
(a) GREEN
(b) RED
(c) YELLOW
(d) NONE

सामा य ि थित म कौन सा काश वचािलत संकेत ारा िदखाया गया है?

75 (a) हरा
(b) लाल RED
(c) पीला
(d) कोई नह
Which Signal shows no light in on position?
(a) STARTER CALLING ON
(b) HOME
(c) DISTANT
(d) CALLING ON
/
कौन सा संकेत चालू ि थित पर काश नह िदखाता है?
76 (a) टाटर
(b) होम कॉिलग ओन
(c) िड टट
(d) कॉिलग ओन
The first detonator to be fixed at how many distance from obstruction
during emergency.
(a) 800 m
(b) 1200 m
(c) 30 m
(d) 600 m

77 आपातकाल के दौरान बाधा से िकतनी दूरी पर पहला डेटोनेटर रखा जाना है।
(a) 800 मीटर
600m
(b) 1200 मीटर
(c) 30 मीटर
(d) 600 मीटर

Accident

Engineering (Works) Question Bank 2020 Page 81


ZRTI Bhusawal

Duration of short hooter : 45 Seconds


(a) 30 SECONDS
(b) 60 SECONDS
(c) 45 SECONDS
(d) 10 SECONDS /

78 लघु टर की अविध:
(a) 30 सेकंड
45 सेकंड
(b) 60 सेकंड
(c) 45 सेकंड
(d) 10 सेकंड
Standard play in case of new wheel:
(a) 35 mm
(b) 38 mm 19mm
(c) 17.5 mm
(d) 19 mm
/
79 नए पिहया के मामले म मानक खेल:
(ए) ३५ िममी
(बी) ३८ िममी १९ िममी
(सी) १७.५ िममी
(डी) १९ िममी
At accident site while track measurement on curve, how much mm chord
is used for calculating Versine?
(a) 20
(b) 30.5
(c) 15
(d) 10

व पर ैक माप करते समय दुघटना थल पर, वरसाइन की गणना के िलए िकतना


80 िममी कॉड का उपयोग िकया जाता है?
(a) 20
(b) 30.5 20
(c) 15
(d) 10
For conducting departmental enquiry the orders to form the committee
will be given by whom?
(a) SR.DEN
(b) ADEN DRM
(c) GM
(d) DRM
/
81 िवभागीय जाँच कराने के िलए सिमित बनाने के आदेश िकसके ारा िदए जाएंगे?
(a) सी.डी ई एन
(b) ए डी ई एन डी आर एम
(c) जी एम
(d) डी आर एम

Engineering (Works) Question Bank 2020 Page 82


ZRTI Bhusawal

Diversion likely to be used for more than how many days is regarded as
Semi-Permanent Diversion.
(a) 3
(b) 5
(c) 10
(d) NONE

अध- थायी डाई हजन के प म िकतने िदन से अिधक के िकसी भी डाई हजन को
82 उपयोग िकए जाने की संभावना है।
(a) 3
(b) 5 10
(c) 10
(d) NONE
In terms of monetary loss, An accident causing damage how much loss to
railway property will be categorised as serious accident..
(a) 1 CRORE
(b) 5 CRORE 2 crore
(c) 2 CRORE
(d) 10 CRORE
मौि क हािन के संदभ म, एक दुघटना के कारण रेलवे की संपि को िकतना नुकसान /
83 होता है, इसे गंभीर दुघटना के प म वग कृ त िकया जाएगा।
(a) 1 करोड़
(b) 5 करोड़ 2 करोड़
(c) 2 करोड़
(d) 10 करोड़
What do we call the point noted first at an accident site while track
measurement?
(a) POM
(b) POD POM
(c) POS
(d) NONE
/
84 ै माप करते समय हम एक दुघटना थल पर पहले उ लेिखत िबदु को या कहते ह?

(ए) पीओएम
(बी) पीओडी पीओएम
(सी) पीओएस
(डी) कोई नह
What should be the steepest gradient In semi-permanent diversion?
(a) 1 IN 150
(b) 1 IN 200 1 in 100
(c) 1 IN 400
(d) 1 IN 100
/
85 अध- थायी मोड़ म सबसे सरल ढाल या होना चािहए?
(a) 150 म 1
(b) 200 म 1 100 म 1
(c) 400 म 1
(d) 100 म 1

Engineering (Works) Question Bank 2020 Page 83


ZRTI Bhusawal

Senior subordinate enquiry should commence within how many days.


(a) D+1
(b) D+2
(c) D+3
(d) D+5

86 विर अधीन थ जांच िकतने िदन के भीतर शु होनी चािहए।


(a) D + 1
(b) D + 2 D+1
(c) D + 3
(d) D + 5
ACD is
(a) ANTI CORROSION DEVICE
(b) AUTOMATIC CORROSION DETECTOR
(c) ANTI COLLISION DEVICE
(d) NONE
87 ऐ. सी. डी को पूण करे?
(a) ANTI CORROSION DEVICE Anti-Collision
(b) AUTOMATIC CORROSION DETECTOR Device
(c) ANTI COLLISION DEVICE
(d) NONE
POM is
(a) POINT OF MOUNT
(b) POINT OF MEASUREMENT
(c) PLACE OF MOUNT
(d) PIECE OF MEASUREMENT
88 पी. ओ. एम को पूण करे?
(a) POINT OF MOUNT Point Of Mount
(b) POINT OF MEASUREMENT
(c) PLACE OF MOUNT
(d) PIECE OF MEASUREMENT
POD is
(a) POINT OF DETECTION
(b) POINT OF DROP
(c) PLACE OF DERAILMENT
(d) POINT OF DERAILMENT
89 पी. ओ. डी को पूण करे?
(a) POINT OF DETECTION Point Of Drop
(b) POINT OF DROP
(c) PLACE OF DERAILMENT
(d) POINT OF DERAILMENT
What is the Permissible limit of twist in straight track?
(a) 4mm/mt
(b) 3mm/mt 2mm/mt
(c) 2mm/mt
90 (d) 1mm/mt
/
ेट ैक म ि व ट की अनुमेय सीमा या है?
(a) 4 िम.मी. / मीटर
(b) 3 िम.मी. / मीटर

Engineering (Works) Question Bank 2020 Page 84


ZRTI Bhusawal

(c) 2 िम.मी. / मीटर 2 िम.मी. / मीटर


(d) 1 िम.मी. / मीटर

Turnout Answer
91 CRS comes under the ministry of ……………… ministry of civil
(a) Ministry of railways (b) Ministry of home affairs aviation
(c) Ministry of civil aviation (d) None of these.

92 Alteration to point and crossing in running line will require …………. (a) CRS sanction
CRS sanction
(b)safety certificate by ADEN
(c) safety certificate by DEN
(d) None of these.

Engineering (Works) Question Bank 2020 Page 85


ZRTI Bhusawal

Answer Key Spell – 2 paper 1ST


1 D 24 A 47 D 70 B
2 B 25 A 48 A 71 A
3 A 26 C 49 C 72 C
4 A 27 B 50 B 73 D
5 C 28 D 51 A 74 B
6 B 29 C 52 A 75 B
7 C 30 C 53 A 76 D
8 A 31 D 54 B 77 D
9 A 32 D 55 B 78 C
10 C 33 D 56 C 79 D
11 D 34 D 57 A 80 A
12 C 35 A 58 D 81 D
13 B 36 D 59 D 82 C
14 C 37 A 60 C 83 C
15 D 38 B 61 B 84 A
16 C 39 A 62 C 85 D
17 C 40 C 63 D 86 A
18 C 41 D 64 B 87 C
19 C 42 C 65 B 88 A
20 D 43 D 66 A 89 B
21 A 44 D 67 B 90 C
22 C 45 C 68 B 91 C
23 B 46 B 69 C 92 A

Engineering (Works) Question Bank 2020 Page 86


ZRTI Bhusawal

Decoding
93 GFN Glass Filled Liner
94 ERC Elastic Railway Clip
95 CTR Complete Track Renewal
96 TSR Through Sleeper Renewal
97 LWR Long Welded Rail
98 SWR Short Welded Rail
99 SEJ Switch Expansion Joint

Short Answer
Turn out
100 Similar flexure t/out
101 Contrary flexure t/out
102 Type of switch
103 Define the following
(a) TTS
(b) ATS
(c) Check rail

Components of P.way
104 List various works done under LWR Regular Maintenance.
105 Write about functioning of fastenings.
106 Write characteristics of Elastic Fastenings.
107 Write a note on LWR.
108 Write ideal requirement of sleeper.

Transportation
109 Essentials of Absolute block system
110 Difference between catch and slip siding
111 Essentials of Automatic block system
112 Difference between GR and SR
113 Facing and trailing points

Curves
114 Types of gradients
115 super elevation and its functions
116 Cant deficiency and cant excess
117 Types of curves
118 Grade Compensation

Engineering (Works) Question Bank 2020 Page 87


ZRTI Bhusawal

Long Answer
Turn out
119 Contrary and similar flexure t/out
120 Different component of t/out and terms related to t/ out
CRS
121 Which works required for CRS sanction.
122 Works require CRS sanction in engineering deparment.
123 Procedure for obtaining CRS section.
Curves
124 List various methods of laying of curve. Describe any one method.
125 What is transition curve and how its length is calculated.
Components of P.way
126 Write various characteristics & functions of Ballast.
127 Write various methods of isolation.
128 Write about various types of sleepers.
129 Write a note on SWR.

Transportation
Draw a diagram of B class on Double line in Multi Aspect Signalling System in which
130 show the following (A) Station Section (B) Station Limit ( C) Block Section
131 write in detail about the movement of ODC
P.Way
132 Explain various parameters for measurement of track at Accident Site.

Engineering (Works) Question Bank 2020 Page 88


ZRTI Bhusawal

Spell 2 Paper 2
Bridge
1 When should be the Special Inspection of distress bridge of category-I by inspector Once in a
concerned will be done? month
a) Once in 6 months /
b) Once in 3 months महीने म एक
c) Once in a month बार
d) Once in 2 months

संबंिधत िनरी क ारा ण े ी -1 के संकट पुल का िवशेष िनरी ण कब िकया जाना चािहए।
a) 6 महीने म एक बार
b) 3 महीने म एक बार
C) महीने म एक बार
d) 2 महीने म एक बार
2 When should be the Special Inspection of distress bridge of category-2 by inspector once in a
concerned will be done? three month
a) Once in a month /
b) Once in 2months 3 महीने म एक
c) Once in 3 months बार
d) Once in 6 months

संबंिधत िनरी क ारा ण े ी -2 के संकट पुल का िवशेष िनरी ण कब िकया जाना चािहए?
a) महीने म एक बार
b) एक बार 2 महीने म
c) 3 महीने म एक बार
d) 6 महीने म एक बार
3 When should be the Special Inspection of distress bridge of category-I by DEN & Sr. once in a
DEN concerned will be done? three month
a) Once in a month /
b) Once in 2months 3 महीने म एक
c) Once in 3 months बार
d) Once in 6 months

सी. डी.ई.एन & डी.ई.एन ारा संबंिधत ेणी I के संकट सेतु का िवशेष िनरी ण कब िकया जाना
चािहए?
a) महीने म एक बार
बी) एक बार 2 महीने म
c) 3 महीने म एक बार
d) 6 महीने म एक बार
4 When should be the Special Inspection of distress bridge of category-2 by DEN & Sr. Once in a
DEN concerned will be done? year
a) Once in 6 months /
b) Once in a month वष म एक बार
c) Once in 3 months
d) Once in a year

Engineering (Works) Question Bank 2020 Page 89


ZRTI Bhusawal

सी. डी.ई.एन & डी.ई.एन ारा संबंिधत ेणी -2 के संकट पुल का िवशेष िनरी ण कब िकया
जाना चािहए?
a) 6 महीने म एक बार
b) महीने म एक बार
c) 3 महीने म एक बार
घ) वष म एक बार
5 A bridge having how much linear waterway or how much total waterway is called as 300 meters
an important bridge. and 1000
a) 600 m and 500 sqm sqm
b) 300 m and 1000 sqm /
c) 300 m and 500 sqm 300 मीटर की
d) 200m and 800 sqm 1000 वगमीटर

एक पुल िजसके पास िकतना रैिखक जलमाग या िकतना कु ल जलमाग है उसे एक मह वपूण पुल
कहा जाता है।
a) 600 मीटर और 500 वगमीटर
b) 300 मीटर की 1000 वगमीटर
c) 300 मीटर और 500 वगमीटर
d) 200 मीटर और 800 वगमीटर
6 What should be the frequency of painting of steel of steel girder bridge depending 1 to 6 years
on climate?
a) 1 to 6 years
b) 1 to 5 years
c) 1 to 3 years
d) 1 to 4 years

जलवायु के आधार पर टील गडर ि ज के टील की पिटग की आवृि या होनी चािहए?


a) 1 से 6 वष
बी) 1 से 5 साल
ग) 1 से 3 साल
d) 1 से 4 साल
7 What should be the Speed restriction imposed on train moving on RH girder? 15 to 20
a) Stop dead and 10kmph kmph
b) 25 to 50 kmph /
c) 15 to 20 kmph 15 से 20
d) 30 kmph िकमी ित घंटा

आरएच गडर पर चलती ेन म गित ितबंध या होना चािहए?


a) मृत और 10 िकमी ित घंटा बंद करो
b) 25 से 50 िकमी ित घंटा
c) 15 से 20 िकमी ित घंटा
d) 30 िकमी ित घंटा
8 What is the inspection schedule of ADEN's bridges? Once in a
a) Once in a year year
b) Once in 2 years /
c) Once in 3 months वष म एक बार
d) Once in 6 months

Engineering (Works) Question Bank 2020 Page 90


ZRTI Bhusawal

ए. डी. ई. एन ि ज का िनरी ण काय म या है?


a) वष म एक बार
b) 2 साल म एक बार
c) 3 महीने म एक बार
d) 6 महीने म एक बार
9 What do we call a Long bridge over a deep valley Viaduct
a) Aquaduct /
b) Through bridge वायड ट
c) viaduct
d) Deck bridge

हम एक गहरी घाटी पर एक लंबे पुल को या कहते ह


a) ए ाड ट
b) पुल के मा यम से
c) वायड ट
d) डेक ि ज
10 The bridge shall be inspected by IOW/PWI when before monsoon. Once in a
a) Once in a year year
b) Once in 2 years /
c) Once in 3 months वष म एक बार
d) Once in 6 months

मानसून से पहले कब IOW / PWI ारा पुल का िनरी ण िकया जाएगा।


a) वष म एक बार
b) 2 साल म एक बार
c) 3 महीने म एक बार
d) 6 महीने म एक बार

Tunnels
When should be The structural portion of the tunnel is inspected in detail by IOW. (Once a year)
a)Once in a month
b)Once in 2months
c) Once in 3 months
d) Once in 6 months
11
कब होना चािहए IOW ारा सुरंग के संरचना मक िह से का िव तार से िनरी ण िकया गया है।
a) महीने म एक बार
b) एक बार 2 महीने म
c) 3 महीने म एक बार
d) 6 महीने म एक बार
To carry out thorough inspection of the sides and roof of the tunnels requisite (Open
staging what shall be used. Wagon, Dip
a) Push trolley lorry, or Rail
12 b) Open wagon Motor)
c) Rail dolley
d) Dip lorry

प और सुरंग की छत का पूरी तरह से िनरी ण करने के िलए आव यक है िक या उपयोग


िकया जाएगा।

Engineering (Works) Question Bank 2020 Page 91


ZRTI Bhusawal

a) पुश ॉली
b) ओपन वैगन
c) रेल डॉली
d) िडप लॉरी
During inspection of tunnel walls and roofing, cracks in the masonry should be (RED)
marked by which paint. /
a) White लाल
b) Black
c) Red
d) Yellow

सुरंग की दीवार और छत के िनरी ण के दौरान, िचनाई म दरार िकस पट ारा िचि नत की


13
जानी चािहए।
a) सफ़े द
b) काला
c) लाल
d) पीला
For tunnels more than how many meters, level of pollution and temperature ( 200 metre)
condition should be enquired from the gang and key man working in that location of
tunnel in view of passenger comfort.
a)100 m
b) 50 m
c) 10 m
d) 250 m

िकतने मीटर से अिधक सुरंग के िलए, दूषण के तर और तापमान की ि थित को या ी आराम


के म ने जर सुरंग के उस थान पर काम करने वाले िगरोह और मुख ि से पूछताछ की जानी
14
चािहए।
a) 100 मीटर
b) 50 मी
c) 10 मी
d) 250 मी
How many hour’s exposure need to be considered for the design of ventilation (8 Hours)
system. /
a)10 hours 8 घंटे
b) 6 hours
c) 12 hours
d) 8 hours
15
विटलेशन िस टम के िडजाइन के िलए िकतने घंटे के दशन पर िवचार करने की आव यकता है।
a) 10 घंटे
b) 6 घंटे
c) 12 घंटे
d) 8 घंटे
16 What is the Ratio of train frontal area to tunnel cross-section? (0.5 to 0.6)
a) 0.5 to 0.6
b) 0.2 to 0.3
c) 0.3 to 0.4
d) 0.6 to 0.7

Engineering (Works) Question Bank 2020 Page 92


ZRTI Bhusawal

सुरंग पार अनुभाग की ेन ललाट े का अनुपात या होना चािहए?


a) 0.5 से 0.6
b) 0.2 से 0.3
c) 0.3 से 0.4
d) 0.6 से 0.7
What method or material is used to seal the cracks where seepage is light. (Lead Wool)
a) Pointing
b) Grouting
c) Lead wool
d) Bituminous

जहां सीपेज ह का है, वहां दरार सील करने के िलए िकस िविध या साम ी का उपयोग िकया
17 जाता है।
a) इशारा करता है
b) ाउिटग
c) लीड ऊन
d) िबटुिमनस
Who should be posted round the clock at nominated vulnerable cuttings during the (Stationary
monsoon period. Watchman)
a) PWI In charge /
b) Stationary Watchman ि थर
c) IOW चौकीदार
d) Sectional PWI
िज ह मॉनसून अविध के दौरान नामांिकत असुरि त किटग म चौबीस घंटे तैनात िकया जाना
18 चािहए।
क) पीड लूआई भारी
b) ि थर चौकीदार
ग) IOW
घ) अनुभागीय पीड लूआई

Establishment
Every year how many days of Average Pay Leave is credited to leave account of an 30 Days
employee.
a) 10 DAYS
b) 30 DAYS
c) 20 DAYS
d) 15 DAYS

19 हर साल औसत वेतन छु ी के िकतने िदन िक एक कमचारी के खाते म जोडी जाती है?
a) 10 िदन
b) 30 िदन
ग) 20 िदन
d) 15 िदन
Average Pay Leave is credited to employee's account how many times a year. Twice
20 a) Twice /
b) Every Month दो बार
c) Thrice
d) Once

Engineering (Works) Question Bank 2020 Page 93


ZRTI Bhusawal

औसत वेतन अवकाश कमचारी के खाते म वष म िकतनी बार जमा िकया जाता है।
A) दो बार
B) हर महीने
C) तीन बार
D) एक बार
An employee can accumulate how many numbers of Average Pay Leave in his 300 +15 days
account in entire service. /
a) 285 +15 days 300 +15 िदन
b) 275 +15 days
c) 300 Days
d) 300 +15 days
एक कमचारी पूरी सेवा म अपने खाते म औसत वेतन अवकाश की िकतनी सं या जमा कर सकता
21
है।
a) 285 +15 िदन
b) 275 +15 िदन
c) 300 िदन
d) 300 +15 िदन
When SF-5 is issued? major
a) major penalty penalty
b) minor penalty /
c) Revocation मुख दंड
d) Suspension

22 एसएफ -5 कब जारी िकया जाता है?


A) मुख दंड
B) मामूली जुमाना
C) िनरसन
D) िनलंबन
When SF-4 is issued? Revocation
a) major penalty /
b) minor penalty िनरसन
c) Revocation
d) Suspension
23 एसएफ -4 कब जारी िकया जाता है?
A) मुख दंड
B) मामूली जुमाना
C) िन त
D) िनलंबन
When SF-2 is issued? deemed
a) major penalty suspension
b) minor penalty /
c) Revocation समझा
d) deemed Suspension स पशन

24 एसएफ -2 कब जारी िकया जाता है?


A) मुख दंड
B) मामूली जुमाना
C) िन त
D) समझा स पशन

Engineering (Works) Question Bank 2020 Page 94


ZRTI Bhusawal

When SF-1 is issued? Suspension


a) major penalty /
b) Revocation िनलंबन
c) minor penalty
d) Suspension

25 एसएफ -1 कब जारी िकया जाता है?


A) मुख दंड
B) िनरसन
C) मामूली जुमाना
D) िनलंबन
Study leave of maximum how many years is sanctioned for doctors and for other 3 yrs and
railways employees. 2yrs
a) 1 yr. and 2yrs /
b) 3 yrs. and 2yrs 3 वष और 2
c) 2 yrs and 3yrs वष
d) 2 yrs and 1yr

डॉ टर और अ य रे लवे कमचािरय के िलए अिधकतम िकतने वष के िलए अ ययन अवकाश


26 वीकृ त है।
A) 1 वष और 2 वष
B) 3 वष और 2 वष
C) 2 वष और 3 वष
D) 2 वष और 1 वष
There are total how many numbers of major penalties and minor penalties as per 5 nos. and 4
DAR rule 1968. nos.
a) 4 nos. and 4 nos. /
b) 5 nos. and 5 nos. 5 न. और 4 न.
c) 4 nos. and 5 nos.
d) 5 nos. and 4 nos.
27
डीएआर िनयम 1968 के अनुसार कु ल िकतने मुख दंड और मामूली दंड ह।
a) 4 न. और 4 न.
b) 5 न. और 5 न.
c) 4 न. और 5 न.
d) 5 न. और 4 न.
On duty which type of passes are provided at railway board level. Gold pass
a) Platinum pass /
b) Silver pass गो ड पास
c) Gold pass
d) bronze pass

28 ूटी पर िकस कार के पास रेलवे बोड तर पर दान िकए जाते ह?


a) लेिटनम पास
b) िस वर पास
c) गो ड पास
d) कां य पास

Engineering (Works) Question Bank 2020 Page 95


ZRTI Bhusawal

What is the Colour of first class-A PTO and First class PTO? white and
a) yellow and green green
b) pink and white /
c) white and green सफे द और हरे
d) green and white

29 थम ेणी-ए पीटीओ और थम ेणी पीटीओ का रं ग या है?


a) पीला और हरा
b) गुलाबी और सफे द
c) सफे द और हरे
d) हरा और सफे द
Who is the chairman of PREM & PNM At railway board level? CRB &
a) CRB & Member staff resp. Member
b) GM & PCPO resp. staff
c) Member staff & CRB resp.
d) PCPO and GM resp.

30 रेलवे बोड तर पर PREM & PNM के अ य कौन ह?


क) सीआरबी और सद य टाफ स मान।
बी) जीएम और पीसीपीओ स मान।
ग) सद य टाफ और सीआरबी स मान।
डी) पीसीपीओ और जीएम स मान
Who is the Chairman of JCM and number of member in it? cabinet
a) Joint Secretary, 12 . secretary, 24
b) Cabinet Secretary, 24 /
c) Joint Secretary, 24. कै िबनेट सिचव,
d) Cabinet Secretary, 12 . 24

31 JCM के अ य कौन ह और इसम िकतने सद य ह?


a) संयु सिचव, 12
b) कै िबनेट सिचव, 24
c) संयु सिचव, 24
d) कै िबनेट सिचव, 12
How many days of Maternity leave admissible to a female railway employee? 180 days
a) 160
b) 140
c) 180
d) 120
32 एक मिहला रेलवे कमचारी को िकतने िदन का मातृ व अवकाश िदया जा सकता है?
a) 160
b) 140
c) 180
d) 120
Power of appointment for group C employee on compassionate grounds lies with GM
33 whom? /
a) CRB जी.एम.
b) GM
c) Member staff
d) PCPO

Engineering (Works) Question Bank 2020 Page 96


ZRTI Bhusawal

अनुकंपा के आधार पर ुप सी कमचारी के िलए िनयुि की शि िकसके पास है?


a) सी.आर.बी.
b) जी.एम.
c) सद य टाफ
d) पीसीपीओ
How many days of Paternity leave admissible to a male railway employee? 15
a) 16
b) 14
c) 18
d) 15

34 पु ष रेलवे-कमचारी को िपतृ व अवकाश िकतने िदन के िलए वीकाय है?


a) 16
b) 14
c) 18
d) 15
How many month is the Validity of half set privilege pass?. 4
a) 6
b) 4
c) 8
d) 5
35 आधे सेट िवशेषािधकार पास की वैधता िकतने महीने है?
a) ६
b) 4
c) 8
d) ५
Who is the chairman of PNM at Zonal level? GM
a) CRB /
b) GM जी.एम
c) Member staff
d) PCPO

36 जोनल तर पर पीएनएम के अ य कौन ह?


a) सी.आर.बी.
b) जी.एम.
c) सद य टाफ
d) पीसीपीओ
Who is the chairman of PNM at divisional level? DRM
a) Sr. DEN
b) DEN
c) DRM
d) PCPO

37 मंडल तर पर पीएनएम के अ य कौन ह?


a) सीिनयर डी.ई.एन
b) डी.ई.एन
c) डी. आर. एम
d) पीसीपीओ

Engineering (Works) Question Bank 2020 Page 97


ZRTI Bhusawal

At divisional level in every how many months the meeting of PNM should take Two months
place? /
a) Two months दो महीने
b) Three months
c) Four months
d) Five months

38 मंडल तर पर, पीएनएम की बैठक िकतने महीन म होनी चािहए?


A) दो महीने
B) तीन महीने
C) चार महीने
D) पांच महीने
JCM is having how many tier of working. Three
a) Two /
b) Three तीन
c) Four
d) Five

40 जे. सी. एम. के काम करने के िकतने तर है।


a) दो
b) तीन
c) चार
d) पाँच
PNM is having _________ tier of working. Three
a) Two /
b) Three तीन
c) Four
d) Five
41 पी.एन. एम. काम के करने के िकतने तर है।
a) दो
b) तीन
c) चार
d) पाँच
When SF-7 is issued? appointing
a) major penalty enquiry
b) appointing enquiry officer officer
c) Revocation /
d) Suspension जाँच अिधकारी
िनयु करना
42 एसएफ -7 कब जारी िकया जाता है?
a) मुख दंड
b) जाँच अिधकारी िनयु करना
c) िनरसन
d) िनलंबन
43 When SF-11 is issued? minor
a) minor penalty penalty
b) appointing enquiry officer /
c) Revocation मामूली जुमाना
d) Suspension

Engineering (Works) Question Bank 2020 Page 98


ZRTI Bhusawal

एसएफ -11 कब जारी िकया जाता है?


a) मामूली जुमाना
b) जाँच अिधकारी िनयु करना
c) िनरसन
d) िनलंबन

Store and Accounts


44 When should Each stock holder should verify his stock? 6 months
(a) once in a year /
(b) once in two years छह महीने म
(c) once in three years एक बार
(d) once in six months

येक टॉक धारक को अपना टॉक कब स यािपत करना चािहए?


(a) वष म एक बार
(b) दो साल म एक बार
(c) तीन साल म एक बार
(d) छह महीने म एक बार
45 What do we call those stocks which have not been issued to any inventor during Movable
past 24 months but can be used in near future? surplus store
(a) movable MAS store /
(b) movable consumable store चल अिधशेष
(c) surplus store भंडार
(d) movable surplus store

हम उन शेयर को या कहते ह जो िपछले 24 महीन के दौरान िकसी भी सूची को जारी नह


िकए गए ह, लेिकन िनकट भिव य म उपयोग िकए जा सकते ह?
(ए) चल एमएएस टोर
(b) चल उपभो य टोर
(ग) अिधशेष दुकान
(d) चल अिधशेष भंडार
46 Full form of DMTR? Daily
(a) Detonator material transaction register material
(b) Dead material transaction register transaction
(c) Daily material transaction register register
(d) Duty material transaction register
DMTR का फु ल फॉम?
(a) Detonator material transaction register
(b) Dead material transaction register
(c) Daily material transaction register
(d) Duty material transaction register
47 How many railway materials have been classified in major groups and main groups. 10,76
(a) 10,76
(b) 10,67
(c) 76,10
(d)67,10
िकतने रे लवे सामि य को मुख समूह और मु य समूह म वग कृ त िकया गया है।
(a) 10,76

Engineering (Works) Question Bank 2020 Page 99


ZRTI Bhusawal

(b) 10,67
(c) 76,10
(d) 67,10
48 Full form of PCMM………… Principle
(a) Principle Chief Mechanical Management Chief
(b) Principle Chief Modification Management Material
(c) Principle Chief Material Manager Management
(d) Principle Chief Material Management
PCMM का फु ल फॉम?
(a) Principle Chief Mechanical Management
(b) Principle Chief Modification Management
(c) Principle Chief Material Manager
(d) Principle Chief Material Management

49 The assistant engineer should check about how much percentage of the equipment 20%
once a year?
(a) 10%
(b) 20%
(c) 25%
(d)100%
सहायक अिभयंता को वष म एक बार उपकरण का िकतना ितशत िनरी ण करना चािहए?
(a) 10%
(b) 20%
(c) 25%
(d) 100%
50 According to ABC analysis item which represents 20% of total issue will be classified B
as which category? /
(a) A बी
(b) B
(c) C
(d)None of these

एबीसी िव ेषण आइटम के अनुसार जो कु ल जारी िकए गए आइटम का 20% ितिनिध व करता
है, उसे िकस ेणी म वग कृ त िकया जाएगा?
(a) ए
(b) बी
(c) सी
(d) इनम से कोई नह
51 Full form RMC………………. Railway
(a) Railway material consignment material
(b) Rail material consignment consignment
(c) Railway material consignee
(d) Railway movable consignment
पी. सी.एम.एम. का फु ल फॉम?
(a) Railway material consignment
(b) Rail material consignment
(c) Railway material consignee
(d) Railway movable consignment
52 Full form MAS………………. Material at
(a) Management at site site

Engineering (Works) Question Bank 2020 Page 100


ZRTI Bhusawal

(b) Manager at site


(c) Material at site
(d) None of these
एम. ए. एस. का फु ल फॉम?
(a) Management at site
(b) Manager at site
(c) Material at site
(d) None of these
53 What is Form no. of MAS account? E 1737
(a)S-1667 /
(b) E-1737 ई -1737
(c) S-1737
(d)none of these

MAS खाते का फॉम नंबर या है?


(क) एस 1667
(b) ई -1737
(c) S-1737
(d) इनम से कोई नह
54 When should the Verification of MAS store? Once a year
(a) once in a year /
(b) once in two years वष म एक बार
(c) once in three years
(d) once in six months

MAS टोर का स यापन कब होना चािहए?


(a) वष म एक बार
(b) दो साल म एक बार
(c) तीन साल म एक बार
(d) छह महीने म एक बार
55 When should the Verification of imprest store is done? Once in two
(a) once in a year year
(b) once in two years /
(c) once in three years दो साल म एक
(d) once in six months बार

सबसे इ े ट टोर का स यापन कब िकया जाना चािहए?


(a) वष म एक बार
(b) दो साल म एक बार
(c) तीन साल म एक बार
(d) छह महीने म एक बार
56 When the Verification of tools and plant should is done? Once in
(a) once in a year three year
(b) once in two years /
(c) once in three years तीन साल म
(d) once in month एक बार

उपकरण और संयं का स यापन कब िकया जाना चािहए?


(a) वष म एक बार

Engineering (Works) Question Bank 2020 Page 101


ZRTI Bhusawal

(b) दो साल म एक बार


(c) तीन साल म एक बार
(d) महीने म एक बार
57 Who should arrange Surplus stock disposal? DEN
(a) ADEN /
(b) DEN डी. ई.एन.
(c) SSE
(d) Chief Engineer

अिधशेष टॉक िनपटान की व था कौन करे?


(a) ए. डी. ई.एन.
(b) डी. ई.एन.
(c) एस.एस.ई.
(d) मु य अिभयंता
58 Transfer of store from one department to other department is carried out by RE-9B
making which form?
(a) DS 8
(b) RE- 9B
(c) RE- 9V
(d) RE-9A

एक िवभाग से दूसरे िवभाग म टोर का थानांतरण िकस फाम से िकया जाता है?
(a) DS 8
(b) RE- 9B
(c) RE- 9V
(d) RE-9A
Financial code
59 What is Voted expenditure? to be passed
(a) Sanction of competent authority in parliament
(b) to be passed in parliament /
(c) to be obtained from contingency fund of India संसद म पािरत
(d) to be passed from CRB होना
मतदान य या है?
(ए) स म ािधकारी की वीकृ ित
(b) संसद म पािरत होना
(c) भारत की आकि मक िनिध से ा िकया जाएगा
(घ) सीआरबी ारा पािरत िकया जाना
60 Consolidated fund of India is created based on which article of the constitution of 266(I)
India.
(a) 266(I)
(b) 267(I)
(c) 268(I)
(d) 269(I)

भारत का समेिकत कोष भारत के संिवधान के िकस अनु छेद के आधार पर बनाया गया है।
(a) 266(I)
(b) 267(I)
(c) 268(I)
(d) 269(I)

Engineering (Works) Question Bank 2020 Page 102


ZRTI Bhusawal

61 Contingency fund of India is created based on which article of the constitution of 267(II)
India.
(a) 266(II)
(b) 267(II)
(c) 268(II)
(d) 269(II)

भारत की आकि मक िनिध भारत के संिवधान के िकस अनु छेद के आधार पर बनाई गई है?
(a) 266(II)
(b) 267(II)
(c) 268(II)
(d) 269(II)
62 Number of demands of grant in railways budgets? 16
(a) 15
(b) 16
(c) 17
(d) 18

रेलवे बजट म अनुदान की मांग की सं या?


(a) 15
(b) 16
(c) 17
(d) 18
63 Repair and maintenance of permanent way and works comes under which demand 4
number?
(a) 4
(b) 5
(c) 6
(d) 7
थायी माग और काय की मर मत और रखरखाव िकस मांग सं या के अंतगत आता है?
(a) 4
(b) 5
(c) 6
(d) 7
64 Repair and maintenance of motive power comes under which demand number. 5
(a) 4
(b) 5
(c) 6
(d) 7

ेरक शि की मर मत और रखरखाव िकस मांग सं या के अंतगत आता है।


(a) 4
(b) 5
(c) 6
(d) 7
65 Repair and maintenance of carriage and wagon comes under which demand 6
number.
(a) 4
(b) 5
(c) 6
(d) 7

Engineering (Works) Question Bank 2020 Page 103


ZRTI Bhusawal

गाड़ी और वैगन की मर मत और रखरखाव िकस मांग सं या के अंतगत आता है।


(a) 4
(b) 5
(c) 6
(d) 7
66 Appropriation to railway fund comes under which demand number. 14
(a) 14
(b) 15
(c) 16
(d) 17

रेलवे फं ड का िविनयोग िकस मांग सं या के अंतगत आता है।


(a) 14
(b) 15
(c) 16
(d) 17
67 Re-appropriation of fund with in the same demand can be done by whom? railway
(a) railway minister board
(b)railway board
(c) general manger
(d) DRM

उसी माँग म िनिध का पुन: िविनयोग िकसके ारा िकया जा सकता है?
(a) रेल मं ी
(b) रेलवे बोड
(c) महा बंधक
(d) डी.आर.एम.
68 Re-appropriation of fund one subhead of demand to another subhead of demand general
but within the same demand can be done by whom? manager
(a) railway minister
(b)railway board
(c) general manager
(d) DRM

माँग के एक उप-उपबंध के िलए िनिध के एक उपशाखा का पुन: िविनयोग लेिकन उसी माँग के
भीतर िकसके ारा िकया जा सकता है?
(a) रेल मं ी
(b) रेलवे बोड
(c) महा बंधक
(d) डी.आर.एम.
69 What do we call the first review of budget when conducted in the month of august? august
(a) preliminary review review
(b) august review
(c)first review
(d) revised estimate

अग त के महीने म बजट की पहली समी ा को हम या कहते ह?


(ए) ारं िभक समी ा
(बी) अग त समी ा
(c) पहली समी ा

Engineering (Works) Question Bank 2020 Page 104


ZRTI Bhusawal

(घ) संशोिधत अनुमान


70 Appropriation acts comes under which article of the constitution of India? 114(I)
(a) 114(I)
(b) 115(I)
(c) 124(I)
(d) 125(I)

िविनयोग अिधिनयम भारत के संिवधान के िकस अनु छेद के अंतगत आता है?
(a) 114(I)
(b) 115(I)
(c) 124(I)
(d) 125(I)

Engineering (Works) Question Bank 2020 Page 105


ZRTI Bhusawal

Answer Key Spell – 2 paper 2ND

1 C 26 B 51 A
2 C 27 D 52 C
3 C 28 C 53 B
4 D 29 C 54 A
5 B 30 A 55 B
6 A 31 B 56 C
7 C 32 C 57 B
8 A 33 B 58 B
9 C 34 D 59 B
10 A 35 B 60 A
11 A 36 B 61 B
12 B 37 C 62 B
13 C 38 A 63 A
14 D 39 A 64 B
15 D 40 B 65 C
16 A 41 B 66 A
17 C 42 B 67 B
18 B 43 A 68 C
19 B 44 D 69 B
20 A 45 D 70 A
21 D 46 C
22 A 47 A
23 C 48 D
24 D 49 B
25 D 50 B

Engineering (Works) Question Bank 2020 Page 106


ZRTI Bhusawal

Decoding
Bridges
71 URN Unique rating number
72 CRN Condition rating number
73 ORN Overall rating number
74 PSC Pre stressed concrete
75 CBE Chief bridge engineer

Establishments
76 PMC Private medical certificate
77 WRIIL Work related illness and injury leave
78 PTO Privilege ticket order
79 PNM Permanent negotiating machinery
80 JCM Joint consultative machinery
81 PREM Participation of railway employee in management
82 HWPR Hours of work and period of rest

Short Answer
Stores
83 Imprest store
84 Stock verification
85 How to control inventory
86 Charge of store
87 Category of store

Bridge
88 Classification Of bridges.
89 Loss of camber in steel girders.
90 Responsibility of the Engineering Officials.
91 Corrosion and its prevention.
92 Types of bearings.
General precautions to be taken while carrying out maintenance
93
work on bridges.
Define Distressed Bridge and Classification of a bridge as
94 “Distressed”.
95 Numerical Rating System of bridges.
96 Imposition of speed restriction on distressed bridges.
97 Maintenance of bed blocks.
98 Rivers and Flood Register.
99 Marginal Bunds.
100 Closure Bunds.
101 Assisted Cut-offs.

Engineering (Works) Question Bank 2020 Page 107


ZRTI Bhusawal

102 Protection of Approach Banks.

Tunnel

103 Discuss action to be taken in the case of boulder drop in cuttings?


104 Write points to be noted during inspection of cuttings?

Establishment
105 PMC
106 PREM
107 JCM
108 HOER Rules
109 Major and minor penalties
110 Leave rules
111 Imposition of minor penalties.
112 Minimum wages acts.
113 New pension scheme.
114 Payment of wages act.
Financial code
115 Consolidated fund of India
116 Canons of financial propriety
117 Contingency fund of India
118 Voted expenditure and charged expenditure
119 Appropriation bills

Long Answer
Stores
120 Classification of store
121 What is non-stock items and stock items
122 Stock verification
123 What is MAS account and check of MAS account
Definition of scrap and type of scrap and what is the source of
124 scrap in IR

Bridges
125 Cement Pressure Grouting.
Various methods of corrosion protection of steel along with their
126 relative advantages and disadvantages.
127 Epoxy grouting.
128 Shotconcreting/ Guniting.
129 Jacketing.
130 Launching of girder with rail cluster method.
Write different types of river training works generally adopted on
131 the Indian Railway.
132 Erection of girder using any one method.

Engineering (Works) Question Bank 2020 Page 108


ZRTI Bhusawal

133 Flood records during and after monsoon.

Tunnel

134 Explain details of inspection to be carried out in tunnels?


135 Explain in detail leakage in tunnels and their method of correction?

Establishment
136 Write various types of leave rules?
137 Describe pass rule?
138 What are the various types of conduct rules?
139 Describe in details discipline and appeal rule 1968?

Financial code
140 Write in details about demands of grants?
141 Explain in details about Public Account Committee?

Engineering (Works) Question Bank 2020 Page 109

You might also like