Professional Documents
Culture Documents
A-12
Long sensing distance/BGS reflective/Micro spot type
minimizing effect of the ambient objects with narrow sensing width Transparent glass
Transparent glass sensing type / Micro spot type sensing type (D)
Proximity
● Stable sensing for transparent object(LCD, PDP, glass etc) sensor
Commonness Ø5.0/4.5/6.5mm
● Compact size: W20×H32×L10.6mm (F)
Rotary
● Protection structure IP65(IEC standard) encoder
Specifications
SSR/
Power
controller
Type Transparent glass sensing type BGS reflective type Micro spot type
NPN open collector output BJG30-DDT BJ30-BDT BJ50-BDT BJ100-BDT BJN50-NDT BJN100-NDT
Model
(J)
Counter
PNP open collector output - BJ30-BDT-P BJ50-BDT-P BJ100-BDT-P BJN50-NDT-P BJN100-NDT-P
Sensing type Diffuse reflective BGS reflective Narrow beam reflective
(K)
30mm 15mm 10 to 30mm 10 to 50mm 10 to 100mm Timer
(Non-glossy (Transparent (Non-glossy (Non-glossy (Non-glossy
Sensing distance 30 to 70mm 70 to 130mm
white paper glass 50×50mm, white paper white paper white paper
100×100mm) t=3.0mm) 50×50mm) 50×50mm) 100×100mm) (L)
Panel
Transparent glass, meter
Sensing target Translucent, opaque materials Translucent, opaque materials
opaque materials, translucent
Min. diameter of Approx. Approx. Approx. Approx. Approx. (M)
- Tacho/
transmitting spot Ø5.0mm Ø4.5mm Ø6.5mm Ø2.0mm Ø2.5mm Speed/ Pulse
meter
Min. sensing target - Approx. min. Ø0.2mm(Copper wire)
Max. 25% at Max. 20% at (N)
Hysteresis Max. 20% at sensing distance Max. 10% at sensing distance sensing distance sensing distance Display
unit
Response time Max. 1ms Max. 1.5ms Max. 1ms
Power supply 12-24VDC ±10%(Ripple P-P: Max.10%) (O)
Sensor
Current consumption Max. 30mA controller
Light source Infrared LED(850nm) Red LED(660nm) Red LED(650nm)
(P)
Sensitivity adjustment - Built-in the adjustment VR Switching
mode power
Operation mode Light ON fixed Light ON/Dark ON selectable by VR supply
NPN open collector output
●Load voltage: Max. 26.4VDC NPN or PNP open collector output (Q)
Control output ●Load voltage: Max. 26.4VDC ●Load current: Max. 100mA Stepper
●Load current: Max.100mA motor&
●Residual voltage - NPN: Max. 1V, PNP: Min. 2.5V Driver&Controller
●Residual voltage: Max. 1V
Protection circuit Reverse polarity protection, output short-circuit protection, interference prevention function(Except BGS reflective type) (R)
Graphic/
Indicator Operation indicator: red, Stability indicator: green Logic
panel
Insulation resistance Min. 20MΩ(at 500VDC megger)
(S)
Noise resistance ±240V the square wave noise(pulse width:1㎲) by the noise simulator Field
network
Dielectric strength 1,000VAC 50/60Hz for 1minute device
Vibration 1.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
Shock 500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times (T)
Software
Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx(Receiver illumination)
Environ-
(U)
Ambient humidity 35 to 85%RH, storage: 35 to 85%RH Other
Protection IP65(IEC standard)
Material Case: PC+ABS, LED Cap: PC, Sensing part: PMMA
Cable Ø3.5mm, 3-wire, Length: 2m(AWG24, Core diameter: 0.08mm, Number of cores: 40, Insulator out diameter: Ø1mm)
Accessories Mounting bracket, Bolt Mounting bracket, Bolt, VR adjustment driver
Approval
Unit weight Approx. 45g Approx. 50g Approx. 45g
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
A-13
BJ Series
Feature data
Through-beam type
● BJ15M-TDT-(C)-(P) / BJ10M-TDT-(C)-(P) / BJ7M-TDT-(P)
Parallel shifting characterisitic Angle characteristic
Measuring method Data Measuring method Data
24
20
BJ15M-TDT-(C)-(P)
20 BJ10M-TDT-(C)-(P) BJ15M-TDT-(C)-(P)
BJ7M-TDT(-P) 16
Sensing distance L(m)
Retroreflective type
● BJ3M-PDT-(C)-(P)
Parallel shifting characterisitic Sensor angle characteristic Reflector angle characteristic
Measuring method Data Measuring method Data Measuring method Data
6.0
5.0 4.5
5.0
Sensing distance L(m)
0 0.0 0.0
160 80 0 80 160 10° 5°0° 5° 10° 40° 20° 0° 20° 40°
ℓ1 ℓ1 Left Center Right Left Center Right
Sensing area(mm) Operation angle(θ) Operation angle(θ)
1600 160
Sensing distance L(mm)
800 Standard
Standard Standard
ℓ1 sensing 1200 ℓ1 sensing ℓ1 sensing 120
target target 600 target
800 80
400
L 400 L L
40
200
200 20
0
0 20 10 0 10 20 0
40 20 0 20 40 ℓ1 ℓ1 40 20 0 20 40
ℓ1 ℓ1 ℓ1 ℓ1
Sensing area(mm) Sensing area(mm) Sensing area(mm)
●B
JG30-DDT ● BJN50-NDT-(P) ●BJN100-NDT-(P)
Sensing area characteristic Sensing area characteristic Sensing area characteristic
Measuring method Data Measuring method Data Measuring method Data
30 120 180
160
25 100
Sensing distance L(mm)
140
Sensing distance L(mm)
A-14
Long sensing distance/BGS reflective/Micro spot type
Feature data (A)
35 60 110
(C)
55 100 Door/Area
30 50 sensor
90
45
Sensing distance L(mm)
50
controller
30
40 80
(I)
SSR/
20 30 60 Power
controller
20 40
10
10 20 (J)
Counter
0 0 0
White Corrugated Black Rubber SUS PCB Acryl White Corrugated Black Rubber SUS PCB Acryl White Corrugated Black Rubber SUS PCB Acryl
paper cardboard paper (black) (green) (transparent) paper cardboard paper (black) (green) (transparent) paper cardboard paper (black) (green) (transparent)
Sensing target(material) Sensing target(material) Sensing target(material) (K)
Timer
meter
50 100
30
40 80 (M)
Tacho/
20 30 60 Speed/ Pulse
meter
20 40
10 (N)
10 20 Display
unit
0 0 0
White Red OrangeYellowGreen Blue Navy Violet Black White Red OrangeYellowGreen Blue Navy Violet Black White Red OrangeYellowGreen Blue Navy Violet Black
(O)
Sensing target(colored paper) Sensing target(colored paper) Sensing target(colored paper) Sensor
controller
Connections (P)
Switching
mode power
● Through-beam type ●Retroreflective type ● Diffuse/Narrow beam/ supply
A-15
BJ Series
Control output diagram
● NPN open collector output ● PNP open collector output
Photoelectric sensor circuit Connection Photoelectric sensor circuit Connection
(Brown)+V (Brown)+V
Load
Main circuit
Over
Main circuit
(Black)output Max.100mA
current
+ 12-24VDC protection + 12-24VDC
Over - ±10% (Black)output -
current Max.100mA ±10%
protection Load
(Blue)0V (Blue)0V
Operation mode
Operation mode Light ON Dark ON
Received light Received light
Receiver operation
Interrupted light Interrupted light
Operation indicator ON ON
(red LED) OFF OFF
ON ON
Transistor output
OFF OFF
32
32
25
25
15
15
M8 M8
2.7
3
Cable: Ø3.5, 2m
<Emitter> <Receiver> <Emitter> <Receiver>
32
25
25
8
8
15
15
2.7
Cable: Ø3.5, 2m M8
Optical axis
of emitter
35
25
32
35
18
Stability indicator(green)
16.7
20
8.5
of receiver M3Bolt M8
Optical axis
of emitter 24.6 29.5
25
32
8
42.5
15
2.7
A-16
Long sensing distance/BGS reflective/Micro spot type
(A)
● Reflector ● Bracket A ● Bracket B(sold separately) Photo
electric
(accessory: MS-2A, sensor
1.2
3
(C)
14
Door/Area
8
36 14 sensor
60.5
52
M3 Bolt 22 8
26.5 Ø3.4 (D)
Proximity
sensor
R25
2.5
R25
34 2-Ø3.8 (E)
42.5
18
25
35
6
Pressure
40.5 8.5 sensor
12.5
1.2
(F)
Rotary
10° 20° encoder
(G)
Connector/
Socket
(I)
SSR/
A B Power
controller
MST-50-10 50 50 (J)
Counter
B
※The waveforms of “Operation indicator” and “Transistor output” are for Light ON operation.
Software
A-17
BJ Series
Switching of operation mode Sensitivity adjustment
Turn the switching volume of operation Order Position Description
Light ON
mode to end of right(L direction), it is Turn the adjustment VR to the right of
operation (A)
D L set as Light ON. min. and check position(A) where the
1
operation indicator is turned ON in “Light
Turn the switching volume of operation MIN. MAX. ON status”.
Dark ON
mode to end of left(D direction), it is set Turn the adjustment VR more to the right
operation
D L as Dark ON. of position(A), check position(B) where
(A) (C) the operation indicator is turned ON. And
※For through-beam type, the switching volume of operation turn the adjustment VR to the left, check
mode is built-in the receiver. 2 position(C) where the operation indicator is
(B) turned OFF in “Light OFF status”.
MIN. MAX. ※If the operation indicator is not turned ON
Optical axis adjustment although the adjustment VR is turned to
●Through-beam type the max. position, the max. position is (C).
1. Place the emitter and the Set the adjustment VR at the center of (A)
Receiver Optimal and (C). To set the optimum sensitivity,
receiver facing each other and Adjust
sensitivity
Right/Left check the operation and lighting of
supply the power. Emitter s (A) (C) stability indicator with sensing target or
2. After adjusting the position of axi 3
without it. If the stability indicator is not
tic
the emitter and the receiver Op
turned ON, please check the sensing
and check their stable MIN. MAX. method again because sensitivity is
Adjust Up/Down
indicating range, mount them unstable.
in the middle of the range. ※No sensitivity adjustment function available for BJG30-
3. After mounting this unit, check the operation of the sensor DDT models.
and lighting of the stability indicator in both status. (None Light ON status Light OFF status
or sensing target status)
※When the sensing target is translucent or small(under Through-
sensing target of ‘ Specifications’), it may not be beam
detected by the sensor because the light can penetrate it. type Emitter
Sensing
Receiver
Emitter Receiver target
● Retroreflective type
1.Place the sensor and the
reflector(or reflective tape) facing Adjust Retro-
each other and supply the power. Right/Left reflective
type Sensing
2.After adjusting the position of the Receiver Reflector
Sensor
target Background
object
sensor and reflector(or reflective
tape) and check their stable Reflector(MS-2)
Diffuse/
Reflective tape
indicating range, mount them in (MST Series) Narrow
the middle of the range. (None or Adjust Up/Down beam/ Sensing
sensing target status) BGS Sensor target
Background
Background
3.After mounting this unit, check the operation of the reflective object object
sensor and in both status. (None or sensing target status) ※Set the sensitivity to operate in stable light ON area and
● Diffuse/Narrow beam/BGS reflective type the reliability for the environment(temperature, voltage,
dust etc) is increased. In unstable light ON area, be sure
After place a sensing target, adjust
that the variation of environment.
the sensor to up or down, right or
※Do not apply excessive force on the adjustment VR, it
left.
may be broken.
Then, fix the sensor in the center
Sensing
※Please use reflective tape(MST Series) for where a
of position where the stability is
target reflector is not installed.
operating.
Reflective efficiency by reflective
● Object(Copper wire) detection <Micro spot type> tape model
[Figure 1] [Figure 2] MST-50-10
60%
(50×50mm)
When copper
wire is moved. Approx. 0 to 15° MST-100-5
80%
(100×100mm)
MST-200-2
140%
(200×200mm)
Copper
Copper
※ Reflective efficiency may vary depending on usage
wire
wire environment and installation conditions.
The sensing distance and minimum sensing target size
※Mount the sensor slanted at an angle ranged 0 to 15˚ shown increase as the size of the tape increases.
Please check the reflection efficiency before using
above as [Figure 2] for stable detection to detect as shown
reflective tapes.
in [Figure 1]. ※For using reflective tape, installation distance should be
min. 20mm.
A-18