Professional Documents
Culture Documents
& Technology
(NUST-PNEC)
Name:
Roll No:
Semester:
Section :
Subject: FE ANALYSIS
2019
Problem No 01.
For a steel Plate of 250x100x50 mm with a hole of 25mm radius at the center
of plate exerted by a load of 7000N on face while fixed at opposite end face.
Young Modulus and Poisson ratio are 2E11 and 0.3 respectively. Analyze
stress and strain variation at hole and surface.
Simulate the given model of chair when you sit on it and exerting one third of your
weight on back. For analysis assume that the chair is fixed at legs and load is
uniformly distributed on surface. (Use your own weight for downward load).