You are on page 1of 1

03/05/2018 Ignition Switch Replacement :: Security & Keyless Entry :: Accessories :: Honda Fit 2007-2018 Repair Manual :: Second

:: Second generation…

Honda Fit: Ignition Switch Replacement


Second generation (2007-2018) / Honda Fit 2007-2018 Repair Manual / Accessories / Security & Keyless Entry / Ignition Switch Replacement

NOTE: SRS components are located in the area. Review the SRS component locations, and precautions and procedures before
doing repairs or servicing.
1. Do the battery terminal disconnection procedure.
2. Remove the steering column covers.
3. Disconnect the 7P connector (A) from the ignition switch (B).

A
4. Remove the two screws and the ignition switch.
5. Install the parts in the reverse order of removal.
6. Do the battery terminal reconnection procedure.

http://www.hfitinfo.com/hofi-544.html 1/1

You might also like