The Barnacle Bustor is designed to be used to remove.
thick buildup of muztals, bainacles or other encrustation
‘from steel, concrete, pilings, seawalls, bulkheads and ships
Bamacle Buster
Ics furnished with a one piece stainless steel housing
and attached steel knockers. The standard unit comes with
Piated hardened steel cutters. Its also available with a
heavy duty quick change assembly. Unit comes with 25/8"
=11 threaded center hole (14mm available) which attaches
‘to standard pneumatic or hydraulic powered tools. 1,000 10
2.000 RPM is suggested for underwater use.
{As the tool moves acrosethe surfaco, the outside knocker
bare shatter bamacles and other heavy growth. Tho
rotating hardened steel cutters follow up with a chipping
‘and scraping action which removes the remaining mater
leaving a clean surface, Water passing through the tool keeps the cutting wheels clean, The tool is.
‘ecologically safe since 1c adds no harmful chemicals 1o the environment, Rotary action displaces water
‘creating a vacuum under the tool. This results in Barnacle Buster being pressed and held against the
ship of work surface. Slight pressure on either side of the tool allows the operator to guide itn any
direction,
ee
50631. Cutters (Setof 49) Std. Unit
50683 Spacers Sex of 49) Std. Unit. SwitlOff Too!
50630 Completa 6" Uni, Hoavy Duty Quick Change
50631 Heavy Duty Quick Change Cutter Assembly.
50670 Complete 6" Unie with 8 Pointed Tungsten Carbide Cutters
50671 Tungsten Carbide Tipped 8 Tooth Cutter Set (21) /
sosea Axles (Sec of 7) fics allo" Units
50685. Inner Retaining Cup, Locks Asles in Place
50685 5/51) Nut
SSNacINUD
Mie
‘50600