Professional Documents
Culture Documents
Limpiaores en Polea de Cabeza
Limpiaores en Polea de Cabeza
25800-250-3DT-MHCB-00101_Rev 00B
Figure 43 below show primary and secondary scraper typical set-out points.
Ploughs
A floating V-plough is provided before the tail pulley on all conveyors and at locations where material can get
entrapped between the pulley and the belt. The coarse ore conveyors (0220-CVB-001 and 0220-CVB-002) also
include a fixed diagonal plough upstream of a floating plough to remove large lumps. The floating V-ploughs are
only suitable for 100mm lumps at a belt speed of 6m/s.
Electronic documents, once printed, are uncontrolled and may become outdated.
Refer to electronic documents in Quebrada Blanca Phase 2 on Aconex for current revisions.
Confidential. © 2019, 2020 Bechtel Chile Ltda. All rights reserved.
Page 83 of 263