Table of Contents
AWS D1.1/01.1M12010
Page No.
Dedication .. v
Personnel. wi
Foreword. ww
List of Tables. xxiv
List of Figures. xxv
1. General Requirements 1
LL Scope. 1
1.2. Limitations 1
13. Definitions vl
14 Responsibilities. 2
15° Approval... 2
1.6 Welding Symbols nd
17. Safety Precautions 3
1.8 Standard Units of Measurement. 3
1.9 Reference Documents. ae}
2. Design of Welded Connections s
2 Scope. . ae
Part A—Common Requirements for Design of Welded Connections (Nontubular and Tubular Members) ...5
2.2 General ' sen
23 Contract Plans and Specifications 5
24 Effective Areas 6
Part B—Specific Requirements for Design of Nontubular Connections (Statically or Cyelically Loaded) ...8
23 General... . 8
2.6 Stresses... 8
27. Joint Configuration and Details 9
28 Joint Configuration and Details—Groove Welds. 10
2.9 Joint Configuration and Details—Fillet Welded Joints 10
2.10 Joint Configuration and Details—Plug and Slot Welds. n
2.11 Filler Plates n
212 Buill-Up Members 2
Part C—Specific Requirements for Design of Nontubular Connections (Cyclically Loaded) 2
2.13 General 2
2.14 Limitations R
2.15 Calculation of Stresses. 1B
2.16 Allowable Stresses and Stress Ranges. “13
2.17 Detailing, Fabrication, and Brection “
2.18 Prohibited Joints and Welds. 18
2.19 Inspection. 1S
ar D— Specie Reguements for Design of Tabla Connection (Stacally or Cell Lode). 18
2.20 General... 15
221 Allowable Stresses 1S
2.22 Memtfication "