AWS 01.1iD1.1M-2010
45
46
47
43
49
4.10
41
412
4.13
414
415
5.
52
53
List of Tables
Effective Size of Plare-Groove Welds Filled Flush...
Z Loss Dimension (Nontubular)
Allowable Stresses
Equivalent Suength Coefficients for Obliquely Loaded Fillet Welds
Fatigue Stress Design Parameters
Allowable Stresses in Tubular Connection Welds
Suess Categories for Type and Location of Material for Cieular Sections
Fatigue Category Limitations on Weld Size or Thickness and Weld Profile (Tubular Connections).
Z Loss Dimensions for Calculating Prequalified PIP T:,¥-, and K-Tubular Connection Minimum
Weld Sizes
Terms for Stengt of Connections (Circular Sections).
Prequalified Base Metal—Filler Metal Combinations for Matching Strength
Prequalified Minimum Preheat and Interpass Temperature .
Filler Metal Requirements for Exposed Bare Applications of Weathering Steels
Minimum Prequalified PIP Weld Size (E)
Joint Detail Applications for Prequalified CIP T, ¥-, and K-Tubular Connections.
Prequalified Joint Dimensions and Groove Angles for CJP Groove Wells in Tubular, ¥, and
K-Connections Made by SMAW, GMAW-S, and FCAW, 7 sos
Prequalified WPS Requirements. sn
Prequalified WPS Variables.
WPS Qualitication—Production Welding Positions Qualified by Pate, Pipe, and Box Tube Tests
WPS Qualification—CIP Groove Welds: Number and Type of Test Specimens and Range of
‘Thickness and Diameter Qualified
[Number and Type of Test Specimens and Range of Thickness Qualified WPS Qualification,
PIP Groove Welds,
Number and Type of Test Specimens and Range of Thickness Qualified WPS Qualification;
Fillet Welds
PQR Essential Variable Changes Requiring WPS Requalifcaton for SMAW. SAW, GMAW,
FCAW, and GTAW.
POR Supplementary Essential Variable Changes for CVN Testing Applications Requiing WPS
Requalification for SMAW, SAW, GMAW, FCAW, and GTAW
PQR Essential Variable Changes Requiring WPS Requalification for ESW or EGW
‘Table 3.1, Table 4.9, and Unlisted Steels Qualified by POR
Cove-Approved Base Metals and Filler Metals Requiring Qualification per ClUS€ 4 ose
Welder and Welding Operator Qualification Production Welding Positions Qualified by
Plate, Pipe, and Box Tube Tests
‘Welder and Welding Operator Qualification —Number and Type of Specimens and Range of
‘Thickness and Diametee Qualified
‘Welding Personnel Performance Essential Variable Changes Requiring Requalificaion
Electrode Classification Groups. oo
CN Test Requirements -
CYN Test Temperature Redaction
Allowable Atmospheric Exposure of Low Hydrogen Electrodes,
Minimum Holding Time a
Altemate Stress-Relief Heat Treatment
Page No.
26
27
37
39
41
4
2
68
7
1
wT
n
3
74
138
139
141
M4
M42
145
146
\a7
148
150
151
135
155
136
156
208,
208
208