You are on page 1of 4

Question One

Determine what type of filter in the following circuit. Calculate the corner or cutoff frequency.

Solution:

The transfer function is

But

Then

Or

Since H(0) = 1 and H(∞) = 0, we conclude that the circuit is a second-order lowpass filter The magnitude
of H is
The corner frequency is the same as the half-power frequency, i.e., where H is reduced by a factor of
1√2. then

Or

Substituting the values of R, L, and C, we obtain

Assuming that ωc is in krad/s,

Question Two

If the bandstop filter in the above figure is to reject a 200-Hz sinusoid while passing other frequencies,
calculate the values of L and C. Take R = 150 & and the bandwidth as 100 Hz.

Solution:
We use the formulas for a series resonant circuit

But

Rejection of the 200-Hz sinusoid means that f0 is 200 Hz, so that ω0 will be

Question Three

(a) Find L2 in the high-pass circuit shown, if |𝐻𝑣 (𝜔)| = 0.50 at a frequency of 50 MHz.

(b) At what frequency is |𝐻𝑣 | = 0.90?

Solution

a-
Then

And

b-

You might also like