The document provides instructions for reading and writing to an MPC56xxx CPU using a CarProTool programmer. To read, connect the programmer to the CPU, select the CPU name and bank, then click read and save the data file. To write, open the saved file, select auto-verify, and click write to program the CPU and automatically verify the data. A video further demonstrates the process.
The document provides instructions for reading and writing to an MPC56xxx CPU using a CarProTool programmer. To read, connect the programmer to the CPU, select the CPU name and bank, then click read and save the data file. To write, open the saved file, select auto-verify, and click write to program the CPU and automatically verify the data. A video further demonstrates the process.
The document provides instructions for reading and writing to an MPC56xxx CPU using a CarProTool programmer. To read, connect the programmer to the CPU, select the CPU name and bank, then click read and save the data file. To write, open the saved file, select auto-verify, and click write to program the CPU and automatically verify the data. A video further demonstrates the process.
1. Connect all test points like on connection diagrams
2. Connect external small black power adapter to CPT 3. Connect RJ48 Cable to CPT Programmer 4. Select correct CPU name and CPU bank (CRASH DATA available in bank1 64kb) 5. Click on Read button ( wait about 20 sec. for read data ) 6. Click save button and save file on your hdd
How to write data with verification to CPU MPC56xxx by
CarProTool Programmer 1. Disconnect and connect again RJ48 Cable in CPT 2. Click Open button and add correct file to buffer 3. Select Auto Verify (available in Write button from right site) 4. Click Write button ( wait for write data and verification)
Watch video: https://youtu.be/zHfFndONsPM
Best Regards CarProTool Support Team
ASTEL S. C. 04-667 Warsaw, Trakt Lubelski 246, Poland +48 509 399 633