You are on page 1of 2

Qatar University, College of Engineering

ELEC 351: Signals and Systems (Fall 2021)


Assignment #1

Due Date: September 21st, 2021


_____________________________________________________________________________________________________
PS: You have the freedom to work in a group (max 3 students) or to submit your individual report. I highly
recommend that you solve these problems personally.

Problem 1:
Sketch each of the following signals. For each case, show that if the signal is periodic/aperiodic and whether
it is even or odd or neither. If the signal is periodic specify its fundamental period.
1) 𝑥(𝑡) = 4sin⁡(2𝜋𝑡)
1
2) 𝑥(𝑡 ) =
|𝑡|
−2𝑡
3) (𝑡 ) = { 3𝑒 ⁡⁡⁡⁡⁡𝑡 ≥ 0
0⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡𝑡 < 0

Problem 2:
A continuous-time signal is shown in the following Figure. Sketch each of the following signals. Show
intermediate sketch graphs that describe the steps.

24

1) 𝑥(𝑡 − 2)
2) 2𝑥(3𝑡 − 1)
3) 𝑥 (𝑡 )[𝛿(𝑡 + 2) + 𝛿 (𝑡 − 15) + 3𝛿 (𝑡 − 13)]
𝑖𝑚𝑝𝑢𝑙𝑠𝑒⁡𝑎𝑡⁡𝑡 = −2
𝑖𝑚𝑝𝑢𝑙𝑠𝑒⁡𝑎𝑡⁡𝑡 = 15
𝑖𝑚𝑝𝑢𝑙𝑠𝑒⁡𝑎𝑡⁡𝑡 = 13

Problem 3:
Determine the value of Average Power P and Total Energy E for each of the following signals and specify
which one is power and which one is energy signal:
1) 𝑥(𝑡 ) = cos⁡(3𝜋𝑡)
−2𝑡
2) 𝑥(𝑡 ) = { 2𝑒 ⁡⁡⁡⁡⁡𝑡 ≥ 0
0⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡𝑡 < 0
𝑡
3) 𝑥(𝑡 ) = {𝑒 ⁡⁡⁡⁡⁡⁡⁡⁡⁡0 ≤ 𝑡 ≤ 2
0⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡⁡𝑒𝑙𝑠𝑒
Problem 4:
1) Consider the following system

𝑓 (𝑡 )

x(t) h1 (t) h2 (t) y(t)

Where, ℎ1 (𝑡) = 𝑒 −2𝑡 𝑢(𝑡), 𝑥 (𝑡) = 𝑡𝑒 −𝑡 𝑢(𝑡) and ℎ 2 (𝑡) is the impulse response of the following system

𝑦 (𝑡) = 𝑓 (𝑡) − 2𝑓(𝑡 − 1)

Find the output signal⁡𝑦(𝑡) .

2) Consider the LTI system with impulse response as


1

ℎ (𝑡) = ∑ (−1) 𝑘𝛿(𝑡 − 4𝑘)


𝑘=−1
Find and sketch the output of the above system for the following input signal x(t) :

You might also like