Professional Documents
Culture Documents
Timken Industrial Seal Catalog - Large Bore 10093
Timken Industrial Seal Catalog - Large Bore 10093
At Timken, customers turn to us to for innovative solutions that solve their most critical
issues. When they do, they benefit from more than a century of knowledge in managing
friction and transmitting power for a variety of industries and applications. We’ve applied
this technical know-how to offer OEMs, distributors and end-users a complete line of
products and services – from bearings, maintenance tools and condition monitoring
products to engineered surfaces, training programs, bearing and chock repair, and more.
Now, from the people that brought you Timken industrial seals for small bore applications
comes the latest addition to our seal family – a complete line of high performance oil seals
and bearing isolators for large bore applications. Like all of our products and services, our
seals are backed by our leading technical support and a vast distribution network. Turn to
Timken today for a full line of Timken industrial seals that help improve bearing, equipment
and bottom-line performance.
Single Lip Seal: Single Lip Split Special Purpose Protector Seal:
All-purpose seal Seal: Engineered Seal: Designed for Used in highly con-
available in a wide for ease of installa- use in high speed taminated operating
range of sizes. tion on large shafts. applications with environments to
Suitable for most Does not require spherical and tapered protect bearings on
sealing applications. costly teardown to roller bearings. both rotating and
replace seal. stationary shafts.
Dual Lip Seal: Bearing Isolator: Uniquely designed
Used for difficult Bonded Seal: Keeps bearings using microcellular
sealing problems or Best choice for protected from technology.
applications involv- applications with contaminants in
ing the separation low performance applications where
of two fluids or requirements. long life and superior
exclusion of foreign Economically priced. protection from
materials. debris are required.
Using This Catalog
The following pages contain the information you need to make accurate decisions about
the seals best suited for your standard applications. Our technical manual includes:
• Organization by seal type, with special • General engineering information, including
sections for single lip, dual lip and special nomenclature, technical specifications,
purpose seals. These three sections tolerance charts and more.
include critical information for easy and • Installation instructions, with diagrams, and
accurate seal selection. troubleshooting tips for common problems.
How to Order
Timken high performance industrial seals and bearing isolators for large bore applications
are available through our trusted network of authorized distributors. Timken works closely
with distributors to deliver unparalleled value and innovation to end users in a variety of
industrial markets.
When ordering oil seals for standard or special applications, please provide as much
information about the end user as possible, including:
• Customer name • Intended use/ • Functional test • Eccentricity
and address application: requirements requirements
• Part name and • Quantity • Suggested design • Temperature
numbers shown • Packaging • Fixed dimensions requirements
on customer’s requirements • RPMs/FPMs • Medium to
drawing • Material • Shaft type be sealed
requirements • Housing type • Type of bearing
Turn to Timken today for a full line of industrial seals that help improve bearing,
equipment and bottom-line performance.
60
30
0
Timken ES Hydrogenated Nitrile (HNBR)
Elastomer
Technology 300
As a technology leader in friction management solutions,
200
we invest in our own research and development and
100
partner with trusted suppliers to develop the highest
quality materials for all of our products. Our new line 0
Timken (V) Fluoroelastomer (FKM)
of seals is no exception. Elastomer
1
Engineering Data
Shaft-to-Bore Misalignment
Shaft-to-bore misalignment is the distance by which
Figure 1: Clockwise Lead a shaft is off center relative to its bore. To measure
this, calculate the distance between the shaft center
line and the bore centerline, as shown in Figure 5.
“X”
Bore
Shaft Bore
Figure 2: Clockwise Lead
3
Engineering Data Engineering Data
a dial indicator against the shaft surface while it is Standard Oil Seals 7 48 0.50
slowly rotated. The resulting measurement is called PS-I Oil Seals 150† 1,034 10
a total indicator reading, or TIR. See Figure 6. Bearing Isolators Ambient Ambient Ambient
* Maximum operating pressure decreases as surface speed
increases. Please consult your Timken sales representative for
“Y” = Dynamic Runout
specific application operating pressures.
“Y” † Retaining plate required at pressures greater than 75psi.
Center of rotation of shaft
Shaft Shaft and Bore Tolerances
Bore Seal performance depends on close tolerances in the
finished dimensions of the shaft, housing bore and
oil seal. Tables 5, 6 and 7 give more information on
proper tolerances.
Table 5: Shaft Diameter Tolerances for Oil Seals
Shaft Diameter Recommended Tolerance
inch mm inch mm
Up thru 4.000 Up thru 101.60 ±0.003 ±0.08
4.001 - 6.000 101.61-152.40 ±0.004 ±0.10
Figure 6 — Dynamic Runout 6.001-10.000 152.41-254.00 ±0.004 ±0.13
10.001 & Up 254.01 & Up ±0.006 ±0.15
Pressure Data
Table 3 shows the maximum operating pressure The recommended bore diameter tolerances shown
suitable for standard oil seals, and Table 4 shows in Table 6 apply only to housings made from ferrous
maximum pressure limits for a variety of sealing options. materials. For recommendations on seals made from
If an application generates higher surge pressures than non-ferrous materials, submit full details to your
what are listed, full details should be submitted for Timken sales representative.
design consideration and engineering recommendations.
Custom seals can be developed, although features Bore depth standard tolerance is +/- 0.016" (0.4 mm).
such as ability to take greater eccentricities may be Table 6: Housing Bore Tolerances for Oil Seals
sacrificed to gain pressure capabilities. If possible, Housing Bore Diameter Recommended Bore
machine designs should include vents to allow the seal (Nominal) Diameter Tolerance
inch mm inch mm
to operate more efficiently.
Thru 1.000 Thru 25.40 ±0.001 ±0.03
Table 3: Operating Pressure Limits For Standard Oil Seals
1.001 - 3.000 25.41 - 76.20 ±0.001 ±0.03
Shaft Speed Maximum* Pressure 3.001 - 4.000 76.21 - 101.60 ±0.0015 ±0.04
f/m (feet m/s (meters psi (pounds kPa
bar 4.001 - 4.375 101.61 - 111.13 ±0.0015 ±0.04
per minute) per second) per sq.in) (kilopascals)
4.376 - 6.000 111.14 - 152.40 ±0.0015 ±0.04
0-100 0 0-5.1 7 48 0.50 6.001 - 7.000 152.41 - 177.80 ±0.002 ±0.05
1001-2000 5.2-10.2 5 35 0.35 7.001 - 8.000 177.81 - 203.20 ±0.002 ±0.05
2001 & up 10.3 & up 3 21 0.20 8.001 - 9.000 203.21 - 228.60 ±0.002 ±0.05
* Split oil seals are not recommended for applications involving fluid 9.001 - 10.000 228.61 - 254.00 ±0.002 ±0.05
pressure. 10.001 - 20.000 254.01 - 508.00 +0.002 +0.05
-0.004 -0.10
20.001 - 30.000 508.01 - 762.00 +0.002 -0.15
-0.006 +0.05
30.001 - 40.000 762.01 - 1016.00 +0.002 -0.15
-0.006 +0.05
40.001 - 60.000 1016.01 - 1524.00 +0.002 -0.25
-0.010 +0.05
Recommended Bore Finish = 100 microinches Ra (2.54 micrometers)
4 or smoother.
Engineering Data Engineering Data
Table 7: Shaft and Bore Tolerances for Bearing Isolators Conversion Formulas
Shaft Diameter Recommended Tolerance Conversion Formulas
inch mm inch mm Multiply By To Obtain
Thru 6.000 Thru 152.40 ±0.002 ±0.05 Inch (in) 25.4 millimeter (mm)
6.001 & Up 152.41 & Up ±0.003 ±0.08 millimeter (mm) 0.0394 Inch (in)
bar 100 kilopascal (kPa)
Shaft Diameter Recommended Tolerance bar 14.504 psi (lb/sq. in)
inch mm inch mm kilopascal (kPa) 0.010 bar
kilopascal (kPa) 0.145 psi (lb/sq. in)
Thru 6.000 Thru 152.40 ±0.001 ±0.03
psi (lb/sq. in) 0.0689 bar
6.001 - 10.000 152.41 - 254.00 ±0.002 ±0.05
psi (lb/sq. in) 6.895 kilopascal (kPa)
10.001 & Up 254.01 & Up ±0.003 ±0.08
NOTE
Recommendations printed in this catalog pertaining to shaft finishes, misalignment, runout, speeds, temperatures and tolerances are generally applicable.
The combination of a selected seal with a certain application, and the operating circumstances involved, could modify the performance of the seal and/or
the equipment. To get the most out of your Timken seals, submit full information to ensure that the seal(s) you receive are suitable for your application.
5
Oil Seals Installation Instructions Installation Instructions Seals
Equipment Inspection and Preparation • Both the shaft and bore should be clear of any
Before installing any lip seal, equipment should be defects, such as spiral-machining marks, burrs,
thoroughly inspected. Follow the specifications below sharp edges, nicks, scratches and corrosion.
for best results: • Typically, the shaft has a wear groove created from
Shaft Surface Finish [Roughness Average or AA previous seals. Make sure the new sealing lip
(Arithmetic Average)] does not seal in the same location.
• When drive features such as keyways or splines
• With the exception of PS-1 (Model 61), all seals are present, they must be covered using an instal-
should have a surface finish within 10-20 µ in. lation tool similar to the one shown in Figure 9
(0.25-0.50 µm). below, and using “Installation Method D” shown
• For PS-1 (Model 61), the surface finish should be in Figure 10 on the next page. If the use of a tool
within 4-8 µ in (0.10-0.20 µm). is prohibited by the size of the shaft, use one of
the following options:
• The surface finish direction of all seals must be
perpendicular to the shaft axis of rotation. • Polyethylene tape
• Brass shim stock with smooth edges
Bore Surface Finish, Ra ([Roughness Average or AA
(Arithmetic Average)] • Wooden plug with smooth edges
• With the exception of PS-1 (Model 61), all seals Sealing Lip
should have a surface hardness between 30-40
Rockwell C. Figure 9: Seal Cross Section
• For PS-1 (Model 61), the surface hardness must • Inspect the sealing lip for any signs of damage,
be within 50-70 Rockwell C. such as cuts, indentations and nicks.
Additional Specifications • Make sure that the spring (finger or garter type)
is retained within the seal (bonded or assembled).
• Both the shaft and bore should include an edge
• Inspect the seal OD, looking for any signs of
relief (preferably an edge chamfer), as shown in
damage, such as cuts (in rubber seals), indentations
Figures 7 and 8. See Tables 8 and 9 for specific
and nicks.
values.
6
Seals Installation Instructions Installation Instructions Oil Seals
Installation Method C Installation Method D • Beginning with the split ends, insert the seal
Thru Bore: Thru Bore: into the housing bore. Make sure the splits ends
Installation tool bottoms Mounting thimble assists
on shaft in compressing seal lip for of the seal are touching.
easier installation
• Working downwards on both sides, continue
Figure 10: Installation Methods inserting the seal into the housing bore, finishing
Solid Seal Installation at the bottom.
Install the seal(s) using one of the proper installation • Once the seal is properly seated in the housing
methods shown in Figure 10. When using installation bore, it should protrude from the housing surface
tooling, the diameter, or contact area, should not be by 0.015" (0.381 mm), as shown in Figure 13. The
more than 0.010" (0.254 mm) smaller than the bore 0.015" protrusion is built into the width of the seal.
diameter. If the use of an installation tool is prohibited The depth of the bore housing should be machined
by the size of the seal, then: to the seal width specified on the packaging.
• Rest a block of wood (piece of 2" x 4" or similar)
on the seal and use a mallet to drive the seal into
position. Do not hit the seal directly with the
mallet, as it may cause damage.
• When using this method, 1
follow a star pattern (as 8 5
Seal Preparation
Timken metallic and non-metallic bearing isolators are
unitized, and any attempts to take them apart will not
only cause seal damage, but will void the warranty
on the product.
Removal
To remove an old isolator from your equipment, start
from the back side of the seal and perform installation
instructions in reverse. If access to the back side of
the isolator is difficult, pry it from the housing a little
Figure 14: Seal Installation on Shaft at a time. Be careful not to damage the shaft or
housing bore during seal removal.
8
Seal & Material Selection Seal & Material Selection Guide
Stainless Steel
Over 12 inches
Reciprocating
6-12 inches
7000-12000
Timken ES
0-3 inches
3-6 inches
1000-2000
2000-3000
3000-5000
5000-7000
Timken N
Timken V
Sillicone
Ambient
GYLON
Bronze
150 psi
Rotary
0-1000
100%
PTFE
0.010
0.015
0.020
0.093
0.100
0.125
7 psi
25%
50%
Seal Type
Model 57 X X X X X X X X X X X X X X X
Model 58 X X X X X X X X X
Model 63 X X X X X X X X X X X X X X X X
Model 53 X X X X X X X X X X X X X X X X X X
Model 23 X X X X X X X X X X
Model 26 X X X X X X X X X X X X X X X X X X X X
(solid)
Model 26 X X X X X X X X X X X X X X X X X
(split)
Model 59 X X X X X X X X X X X X X X X X X X X
Model 87 X X X X X X X X X X X X X X X X X X X X
Model 64 X X X X X X X X X X X X X X X X X X X X X
Model 145# X X X X X X X X X X X X X N/A N/A N/A X X
Model 143# X X X X X X X X X X X X X N/A N/A N/A X X
P/S® X X X X X X X Under X X X X X X X
(Model 61) 0.005
GUARDIAN™† X X X X X X X X X X X X X X
MICRO-TEC®† X X X X X X X X X X X X X X X
ISO-GARD®° X X X X X X X X X X X X X X X X X X
EQUALIZER®° X X X X X X X X X X X X X X X X X X
Type of Max Radial Max Media
Parameter Shaft Size Speed (FPM) Seal Material**
Motion Misalignment (inches) Pressure Level
* Values shown are generally applicable limits. For specific application help, contact your Timken sales representative.
** Seal materials shown are typical for oil seals. Other materials are available upon request. Contact your Timken sales
representative for more information.
# Models 145 and 143 face seals are not available in Timken N, but are supplied with standard nitrile material.
† All Timken metallic bearing isolators are supplied with fluoroelastomer o-rings.
° All Timken non-metallic bearing isolators are supplied with fluoroelastomer o-rings.
Temperature
Resistance
Resistance
Coefficient
Max Spike
Durometer
of Friction
Operating
Chemical
Abrasion
Color
Cost
Material Type#
Timken N Black 80 1.788 -40°F to 200°F 250°F Moderate Moderate Low
(-40°C to 93°C) (123°C)
Timken ES Dark Blue 88 1.053 -40°F to 300°F 350°F High Improved Moderate
(-40°C to 148°C) (177°C)
Timken V Green 76 1.158 -22°F to 400°F 450°F High Very Good High
(-30°C to 204°C) (232°C)
Silicone Light Blue N/A Over -75°F to 350°F 400°F High Excellent High
(FDA - Red) 2.000 (-59°C to 176°C) (232°C)
Gylon® Black N/A 0.100 -120°F to 400°F 450°F High Excellent High
(-84°C to 204°C) (232°C)
* Values shown are generally applicable limits. For specific application help, contact your Timken sales representative.
** Seal materials shown are typical for oil seals. Other materials are available upon request. Contact your Timken sales
representative for more information.
9
Oil Seals Typical Seal Configurations Configuration Oil Seals
Model 3 Model 21 Model 23 Model 24 Model 25 Model 26 Model 26-E Model 26-R1
Model 53 Model 53-F1 Model 53-G1 Model 53-R1 Model 53-R2 Model 53-T2 Model 53-TB Model 53-TF
Model 54 Model 57 Model 58 Model 59 Model 59-G1 PS®-1 PS®-1 Dbl PS®-1 Dbl
Opposed Tandem
PS®-1 Model 62 Model 63 Model 63-F1 Model 63-G1 Model 63-R1 Model 63-R2 Model 63-T2
Reverse Lip
Model 63-TB Model 63-TF Model 64 Model 64-G1 Model 71 Model 76 Model 87 Model 88
Model 91 Model 92 Model 94 Model 111 Model 113 Model 123 Model 143 Model 145
10
Oil Seals Product Information
Model 26 • General purpose seal • Timken N -40°F (-40°C) to 0.750 to 5,000 f/m Molded-in 0.015 @ 1,000 To 7 psi
• Solid or split design 200°F (93°C) 60.000 (25.4 m/s) stainless (0.38 @ 5.10) (0.4 bar)
• Reverse bevel lip design steel finger (N/A if split)
prevents lip rollover • Timken ES -40°F (-40°C) to (19.0 to 0.010 @ 2,000
• Reinforced rubber O.D. 300°F (150°C) 1524.0) (0.25 @ 10.20)
• Single and dual lip configurations
available • Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 26R1 • General purpose dual lip seal • Timken N -40°F (-40°C) to 0.750 to 5,000 f/m Molded-in 0.015 @ 1,000 To 7 psi
• Low-speed service 200°F (93°C) 60.000 (25.4 m/s) stainless (0.38 @ 5.10) (0.4 bar)
• Reverse bevel lip design steel finger (N/A if split)
prevents lip rollover • Timken ES -40°F (-40°C) to (19.0 to 0.010 @ 2,000
300°F (150°C) 1524.0) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 59 • Severe service assembled seal • Timken N -40°F (-40°C) to 6.000 to 5,000 f/m Molded-in 0.015 @ 1,000 To 7 psi
• Heavy duty outer case 200°F (93°C) 90.000 (25.4 m/s) stainless (0.38 @ 5.10) (0.4 bar)
• Reverse bevel lip design steel finger (N/A if split)
prevents lip rollover • Timken ES -40°F (-40°C) to (152.4 to 0.010 @ 2,000
• Aggressive shaft-to-bore 300°F (150°C) 2286.0) (0.25 @ 10.20)
misalignment capability
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 59G1 • Severe service dual lip • Timken N -40°F (-40°C) to 6.000 to 2,500 f/m Molded-in 0.015 @ 1,000 To 7 psi
assembled seal 200°F (93°C) 40.000 (12.8 m/s) stainless (0.38 @ 5.10) (0.4 bar)
• GYLON excluder lip for non-
®
steel finger (N/A if split)
lubricated external conditions • Timken ES -40°F (-40°C) to (152.4 to 0.010 @ 2,000
or corrosive external conditions 300°F (150°C) 1016.0) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 64® • Severe service assembled seal • Timken N -40°F (-40°C) to 8.000 to 7,000 f/m Combination 0.015 @ 1,000 To 7 psi
• Heavy duty metal outer case 200°F (93°C) 90.000 (35.6 m/s) of stainless (0.38 @ 5.10) (0.4 bar)
• Unique carrier/garter spring steel garter (N/A if split)
combination • Timken ES -40°F (-40°C) to (203.2 to & stainless 0.010 @ 2,000
• Industry’s highest shaft-to-bore 300°F (150°C) 2286.0) steel finger (0.25 @ 10.20)
misalignement capability
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 64G1 • Severe service dual lip • Timken N -40°F (-40°C) to 8.000 to 3,500 f/m Carrier/ 0.015 @ 1,000 To 7 psi
assembled seal 200°F (93°C) 55.000 (17.9 m/s) garter (0.38 @ 5.10) (0.4 bar)
• GYLON excluder lip for non-
®
combination (N/A if split)
lubricated external conditions • Timken ES -40°F (-40°C) to (203.2 to 0.010 @ 2,000
or corrosive external conditions 300°F (150°C) 1397.0) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 87 • Severe service seal • Timken N -40°F (-40°C) to 6.000 to 5,000 f/m Molded-in 0.015 @ 1,000 To 7 psi
• Metal reinforced rubber O.D. 200°F (93°C) 48.000 (25.4 m/s) carbon (0.38 @ 5.10) (0.4 bar)
• Reverse bevel lip design steel garter (N/A if split)
prevents lip rollover • Timken ES -40°F (-40°C) to (152.4 to 0.010 @ 2,000
• Aggressive shaft-to-bore 300°F (150°C) 1219.2) (0.25 @ 10.20)
misalignment capability
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 88 • Severe service seal • Timken N -40°F (-40°C) to 6.000 to 3,000 f/m Molded-in 0.015 @ 1,000 To 7 psi
• Aggressive shaft-to-bore 200°F (93°C) 48.000 (15.2 m/s) carbon (0.38 @ 5.10) (0.4 bar)
misalignment capability steel garter (N/A if split)
• Metal reinforced rubber OD for • Timken ES -40°F (-40°C) to (152.4 to 0.010 @ 2,000
positive bore retention 300°F (150°C) 1219.2) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
11
Product Information Oil Seals
Model 53 • General purpose assembled seal • Timken N -40°F (-40°C) to 3.000 to 3,000 f/m Stainless 0.015 @ 1,000 To 7 psi
• Heavy-duty metal outer case 200°F (93°C) 90.000 (15.2 m/s) steel finger (0.38 @ 5.10) (0.4 bar)
• Single and dual lip configurations • Timken ES -40°F (-40°C) to (76.2 to 0.010 @ 2,000
available 300°F (150°C) 2286.0) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 53G1 • General purpose dual lip seal • Timken N -40°F (-40°C) to 3.000 to 1,500 f/m Stainless 0.010 @ 1,500 To 7 psi
• Gylon® excluder lip for non- 200°F (93°C) 40.000 (7.6 m/s) steel finger (0.25 @ 7.60) (0.4 bar)
lubricated external conditions • Timken ES -40°F (-40°C) to (76.2 to
or corrosvie external conditons 300°F (150°C) 1016.0)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 53R1 • General purpose dual lip seal • Timken N -40°F (-40°C) to 3.000 to 2,000 f/m Stainless 0.015 @ 1,000 To 7 psi
• Dual lips oppose for exclusion 200°F (93°C) 15.000 (10.2 m/s) steel finger (0.38 @ 5.10) (0.4 bar)
and retention • Timken ES -40°F (-40°C) to (76.2 to 0.010 @ 2,000
• Spring in one element only 300°F (150°C) 381.0) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 53R2 • General purpose dual lip seal • Timken N -40°F (-40°C) to 3.000 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
• Dual lips oppose for exclusion 200°F (93°C) 15.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
and retention • Timken ES -40°F (-40°C) to (76.2 to 0.005 @ 1,000
• Spring in one element only 300°F (150°C) 381.0) (0.13 @ 5.10)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 53TB • General purpose dual lip seal • Timken N -40°F (-40°C) to 3.000 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
• Lips set in tandem configuration 200°F (93°C) 15.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
• Used for retention and exclusion • Timken ES -40°F (-40°C) to (76.2 to 0.005 @ 1,000
• Spring in both elements 300°F (150°C) 381.0) (0.13 @ 5.10)
• Carbon steel clamp • Timken V -22°F (-30°C) to
400°F (204°C)
Model 53TF • General purpose dual lip seal • Timken N -40°F (-40°C) to 3.000 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
• Lips set in tandem configuration 200°F (93°C) 15.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
• Used for retention and exclusion • Timken ES -40°F (-40°C) to (76.2 to 0.005 @ 1,000
• Spring in both elements 300°F (150°C) 381.0) (0.13 @ 5.10)
• Carbon steel clamp • Timken V -22°F (-30°C) to
400°F (204°C)
Model 53T2 • General purpose dual lip seal • Timken N -40°F (-40°C) to 3.000 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
• Lips set in tandem configuration 200°F (93°C) 15.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
• Used for retention and exclusion • Timken ES -40°F (-40°C) to (76.2 to 0.005 @ 1,000
• Spring in both elements 300°F (150°C) 381.0) (0.13 @ 5.10)
• Carbon steel clamp • Timken V -22°F (-30°C) to
400°F (204°C)
Model 53F1 • General purpose dual lip seal • Timken N -40°F (-40°C) to 3.000 to 1,000 f/m Stainless 0.010 @ 1,000 To 7 psi
• Heavy-duty metal outer case 200°F (93°C) 15.000 (5.1 m/s) steel finger (0.25 @ 5.10) (0.4 bar)
• Felt excluder • Timken ES -40°F (-40°C) to (76.2 to
300°F (150°C) 381.1)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 63 • General purpose assembled seal • Timken N -40°F (-40°C) to 0.250 to 3,000 f/m Stainless 0.015 @ 1,000 To 7 psi
• Heavy-duty metal outer case 200°F (93°C) 3.000 (15.2 m/s) steel finger (0.38 @ 5.10) (0.4 bar)
• Stainless steel finger spring • Timken ES -40°F (-40°C) to (6.4 to 0.010 @ 2,000
• Single and dual lip configurations 300°F (150°C) 76.2) (0.25 @ 10.20)
available • Timken V -22°F (-30°C) to 0.005 @ 3,000
400°F (204°C) (0.13 @ 15.20)
12
Oil Seals Product Information
Model 63G1 • General purpose dual lip seal • Timken N -40°F (-40°C) to 0.250 to 1,500 f/m Stainless 0.010 (0.25) To 7 psi
• Gylon® excluder lip for non- 200°F (93°C) 3.000 (7.6 m/s) steel finger (0.4 bar)
lubricated external conditions • Timken ES -40°F (-40°C) to (6.4 to 76.2)
or corrosvie external conditons 300°F (150°C)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 63R1 • General purpose dual lip seal • Timken N -40°F (-40°C) to 0.250 to 1,000 f/m Stainless 0.015 @ 1,000 To 7 psi
• Dual lips oppose for exclusion 200°F (93°C) 3.000 (10.2 m/s) steel finger (0.38 @ 5.10) (0.4 bar)
and retention • Timken ES -40°F (-40°C) to (6.4 to 76.2) 0.010 @ 2,000
• Spring in one element only 300°F (150°C) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 63R2 • General purpose dual lip seal • Timken N -40°F (-40°C) to 0.250 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
• Dual lips oppose for exclusion 200°F (93°C) 3.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
and retention • Timken ES -40°F (-40°C) to (6.4 to 76.2) 0.005 @ 1,000
• Spring in one element only 300°F (150°C) (0.13 @ 5.10)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 63TB • General purpose dual lip seal • Timken N -40°F (-40°C) to 0.250 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
• Non-sprung front lips serves 200°F (93°C) 3.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
as a baffle • Timken ES -40°F (-40°C) to (6.4 to 76.2) 0.005 @ 1,000
• Lips set in tandem configuration 300°F (150°C) (0.13 @ 5.10)
• Used for retention and exclusion • Timken V -22°F (-30°C) to
400°F (204°C)
Model 63TF • General purpose dual lip seal • Timken N -40°F (-40°C) to 0.250 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
Non-sprung front lips serves 200°F (93°C) 3.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
as a baffle • Timken ES -40°F (-40°C) to (6.4 to 76.2) 0.005 @ 1,000
• Lips set in tandem configuration 300°F (150°C) (0.13 @ 5.10)
• Used for retention and exclusion • Timken V -22°F (-30°C) to
• Spring in both elements 400°F (204°C)
Model 63T2 • General purpose dual lip seal • Timken N -40°F (-40°C) to 0.250 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
• Lips set in tandem configuration 200°F (93°C) 3.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
• Used for retention and exclusion • Timken ES -40°F (-40°C) to (6.4 to 76.2) 0.005 @ 1,000
• Spring in both elements 300°F (150°C) (0.13 @ 5.10)
• Carbon steel clamp • Timken V -22°F (-30°C) to
400°F (204°C)
Model 63F1 • General purpose dual lip seal • Timken N -40°F (-40°C) to 0.250 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
• Felt excluder 200°F (93°C) 3.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
• Timken ES -40°F (-40°C) to (6.4 to 76.2)
300°F (150°C)
• Timken V -22°F (-30°C) to
400°F (204°C)
13
Product Information Oil Seals
Model 71 • General purpose bonded seal • Nitrile -40°F (-40°C) to 0.250 to 1,000 f/m N/A 0.005 @ 1,000 To 7 psi
• No spring 200°F (93°C) 7.250 (5.1 m/s) (0.13 @ 5.10) (0.4 bar)
• Ideal for grease retention or • Fluoroelastomer -40°F (-40°C) to (6.3 to
contamination exclusion 400°F (204°C) 184.1)
Model 76 • Special purpose bonded seal • Nitrile -40°F (-40°C) to 0.250 to 3,000 f/m Carbon 0.015 @ 1,000 To 7 psi
• Metal outer case 200°F (93°C) 8.000 (15.2 m/s) steel garter (0.38 @ 5.10) (0.4 bar)
• Garter spring construction • Fluoroelastomer -40°F (-40°C) to (6.3 to 0.010 @ 2,000
400°F ( 204°C) 203.2) (0.25 @ 10.20)
0.005 @ 3,000
(0.13 @ 15.20)
Model 91 • General purpose bonded seal • Nitrile -40°F (-40°C) to 0.281 to 1,000 f/m N/A 0.005 @ 1,000 To 7 psi
• No spring 200°F (93°C) 5.000 (5.1 m/s) (0.13 @ 5.10) (0.4 bar)
• Ideal for grease retention or • Fluoroelastomer -40°F (-40°C) to (7.1 to
contamination exclusion 400°F ( 204°C) 127.0)
Model 92 • General purpose bonded seal • Nitrile -40°F (-40°C) to 3.000 to 1,000 f/m Carbon 0.010 @ 500 To 7 psi
• Metal outer case 200°F (93°C) 15.000 (5.1 m/s) steel garter (0.25 @ 2.50) (0.4 bar)
• Garter spring construction • Fluoroelastomer -40°F (-40°C) to (76.2 to 0.005 @ 1,000
400°F (204°C) 381.0) (0.13 @ 5.10)
-22°F (-30°C) to
400°F (204°C)
Model 94 • General purpose bonded seal • Nitrile -40°F (-40°C) to 0.438 to 3,000 f/m Carbon 0.015 @ 1,000 To 7 psi
• Metal outer case 200°F (93°C) 7.375 (15.2 m/s) steel garter (0.38 @ 5.10) (0.4 bar)
• Dual lip design • Fluoroelastomer -40°F (-40°C) to (11.1 to 0.010 @ 2,000
• Garter spring construction 400°F (204°C) 187.3) (0.25 @ 10.20)
0.005 @ 3,000
(0.13 @ 15.20)
Model 21 • General purpose split seal • Timken N -40°F (-40°C) to 3.000 to 1,000 f/m Mold-in 0.010 @ 500 N/A
• Low-speed service 200°F (93°C) 15.000 (5.1 m/s) stainless (0.25 @ 2.50)
• Cover plate required • Timken ES -40°F (-40°C) to (76.2 to steel finger 0.005 @ 1,000
300°F (150°C) 381.0) (0.13 @ 5.10)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 23 • General service split seal • Timken N -40°F (-40°C) to 3.000 to 1,000 f/m Mold-in 0.010 @ 1,000 N/A
• Cover plate required 200°F (93°C) 15.000 (5.1 m/s) stainless (0.25 @ 5.10)
• Over 300,000 sizes readily available • Timken ES -40°F (-40°C) to (76.2 to steel finger 0.005 @ 2,000
300°F (150°C) 381.0) (0.13 @ 10.20)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 24 • Special purpose split seal for • Timken N -40°F (-40°C) to 3.000 to 1,000 f/m Mold-in 0.010 @ 500 N/A
tapered housing grooves 200°F (93°C) 15.000 (5.1 m/s) stainless (0.25 @ 2.50)
• Low-speed service • Timken ES -40°F (-40°C) to (76.2 to steel finger 0.005 @ 1,000
• Tapered O.D. 300°F (150°C) 381.1) (0.13 @ 5.10)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 25 • PTFE split seal • PTFE -120°F (-85°C) to 3.000 to 1,000 f/m Carbon 0.010 @ 500 N/A
• Low-speed service 400°F (205°C) 20.000 (5.1 m/s) steel garter (0.25 @ 2.50)
• Excellent chemical resistance (76.2 to 0.005 @ 1,000
• Cover plate required 508.0) (0.13 @ 5.10)
14
Oil Seals Product Information
Model 26 • General purpose bonded seal • Timken N -40°F (-40°C) to 0.750 to 5,000 f/m Mold-in 0.015 @ 1,00 To 7 psi
• No spring 200°F (93°C) 60.000 (25.4 m/s) stainless (0.38 @ 5.10) (0.4 bar)
• Ideal for grease retention or • Timken ES -40°F (-40°C) to (19.0 to steel finger 0.010 @ 2,000
contamination exclusion 300°F (150°C) 1524.0) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 26R1 • Special purpose bonded seal • Timken N -40°F (-40°C) to 0.750 to 5,000 f/m Mold-in 0.015 @ 1,000 To 7 psi
• Metal outer case 200°F (93°C) 60.000 (25.4 m/s) stainless (0.38 @ 5.10) (0.4 bar)
• Garter spring construction • Timken ES -40°F (-40°C) to (19.05 to steel finger 0.010 @ 2,000
300°F (150°C) 1524.0) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
Model 143 • General purpose bonded seal • Nitrile 200°F (93°C) 5.000 (5.1 m/s)
• No spring -40°F (-40°C) to (7.1 to
• Ideal for grease retention or • Timken ES 400°F ( 204°C) 127.0)
contamination exclusion
• Timken V
Model 145A • General purpose bonded seal • Nitrile -40°F (-40°C) to 3.000 to 1,000 f/m N/A N/A N/A
• Metal outer case 200°F (93°C) 15.000 (5.1 m/s)
• Garter spring construction • Fluoroelastomer -40°F (-40°C) to (76.2 to
400°F (204°C) 381.0)
Model 145A1 • General purpose bonded seal • Nitrile -40°F (-40°C) to 0.438 to 3,000 f/m Stainless N/A N/A
• Metal outer case 200°F (93°C) 7.375 (15.2 m/s) steel garter
• Dual lip design • Timken ES -40°F (-40°C) to (11.1 to
• Garter spring construction 400°F (204°C) 187.3)
• Timken V
Model 145A2 • General purpose split seal • Nitrile -40°F (-40°C) to 3.000 to 1,000 f/m Stainless N/A N/A
• Low-speed service 200°F (93°C) 15.000 (5.1 m/s) steel garter
• Cover plate required • Timken ES -40°F (-40°C) to (76.2 to
300°F (150°C) 381.0)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 145L • General service split seal • Nitrile -40°F (-40°C) to 3.000 to 1,000 f/m N/A N/A N/A
• Cover plate required 200°F (93°C) 15.000 (5.1 m/s)
• Over 300,000 sizes readily available • Fluoroelastomer -40°F (-40°C) to (76.2 to
300°F (150°C) 381.0)
-22°F (-30°C) to
400°F (204°C)
Model 145S • Special purpose split seal for • Nitrile -40°F (-40°C) to 3.000 to 1,000 f/m N/A N/A N/A
tapered housing grooves 200°F (93°C) 15.000 (5.1 m/s)
• Low-speed service • Fluoroelastomer -40°F (-40°C) to (76.2 to
• Tapered O.D. 300°F (150°C) 381.1)
-22°F (-30°C) to
400°F (204°C)
15
Product Information Oil Seals
Model 26E • General purpose external seal • Timken N -40°F (-40°C) to 1.000 to 5,000 f/m Stainless 0.015 @ 1,000 To 7 psi
• Solid design 200°F (93°C) 60.000 (25.4 m/s) (0.38 @ 5.10) (0.4 bar)
• Reverse bevel lip design • Timken ES -40°F (-40°C) to (25.4 to 0.010 @ 2,000
prevents lip rollover 300°F (150°C) 1524.0) (0.25 @ 10.20)
• Reinforced rubber OD • Timken V -22°F (-30°C) to 0.008 @ 5,000
400°F (204°C) (0.20 @ 25.40)
• Heavy-duty metal outer case • Timken N -40°F (-40°C) to 3.000 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi
Model 111 • Low speed service 200°F (93°C) 50.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar)
• Assembled design • Timken ES -40°F (-40°C) to (76.2 to 0.005 @ 1,000
300°F (150°C) 1270) (0.13 @ 5.10)
• Timken V -22°F (-30°C) to
400°F (204°C)
Model 113 • Heavy-duty metal outer case • Timken N -40°F (-40°C) to 3.000 to 3,000 f/m Stainless 0.020 @ 1,000 To 7 psi
• Assembled design 200°F (93°C) 50.000 (15.2 m/s) steel finger (0.50 @ 5.10) (0.4 bar)
• Timken ES -40°F (-40°C) to (76.2 to 0.010 @ 2,000
300°F (150°C) 1270)* (0.25 @ 10.20)
• Timken V -22°F (-30°C) to 0.005 @ 3,000
400°F (204°C) (0.13 @ 15.20)
Model 123 • Heavy-duty metal outer case • Timken N -40°F (-40°C) to 1.156 to 3,000 f/m Stainless 0.020 @ 1,000 To 7 psi
• Assembled design 200°F (93°C) 50.000 (15.2 m/s) steel finger (0.50 @ 5.10) (0.4 bar)
• Timken ES -40°F (-40°C) to (29.4 to 0.010 @ 2,000
300°F (150°C) 1270) (0.25 @ 10.20)
• Timken V -22°F (-30°C) to 0.005 @ 3,000
400°F (204°C) (0.13 @ 15.20)
P/S® Single Lip • General purpose assembled seal • Gylon® -40°F (-40°C) to 0.438 to 2,000 f/m N/A 0.005 @ 2,000 150 psi
for high pressure applications 200°F (93°C) 20.000 (10.2 m/s) (0.13 @ 10.20) (10 bar)
• Gylon® element offers excellent • FDA Gylon® -40°F (-40°C) to (11.1 to
chemical resistance 300°F (150°C) 508.0) max
• Dry running up to 700 fpm -22°F (-30°C) to seal O.D.
(3.5 m/s) 400°F (204°C)
P/S® Single Lip • General purpose assembled seal • Gylon® -40°F (-40°C) to 0.438 to 2,000 f/m N/A 0.005 @ 2,000 150 psi
for high pressure applications 200°F (93°C) 20.000 (10.2 m/s) (0.13 @ 10.20) (10 bar)
Reverse • Gylon® element offers excellent • FDA Gylon® -40°F (-40°C) to (11.1 to
chemical resistance 300°F (150°C) 508.0) max
• Dry running up to 700 fpm -22°F (-30°C) to seal O.D.
(3.5 m/s) 400°F (204°C)
P/S® Dual • General purpose assembled seal • Gylon® -40°F (-40°C) to 0.438 to 2,000 f/m N/A 0.005 @ 2,000 150 psi
Opposed for high pressure applications 200°F (93°C) 20.000 (10.2 m/s) (0.13 @ 10.20) (10 bar)
• Gylon® element offers excellent • FDA Gylon® -40°F (-40°C) to (11.1 to
chemical resistance 300°F (150°C) 508.0) max
• Dry running up to 700 fpm -22°F (-30°C) to seal O.D.
(3.5 m/s) 400°F (204°C)
P/S® Dual • General purpose assembled seal • Gylon® -40°F (-40°C) to 0.438 to 2,000 f/m N/A 0.005 @ 2,000 150 psi
for high pressure applications 200°F (93°C) 20.000 (10.2 m/s) (0.13 @ 10.20) (10 bar)
Tandem • Gylon® element offers excellent • FDA Gylon® -40°F (-40°C) to (11.1 to
chemical resistance 300°F (150°C) 508.0) max
• Dry running up to 700 fpm -22°F (-30°C) to seal O.D.
(3.5 m/s) 400°F (204°C)
16
Oil Seals Product Information
Model 26HR • General purpose seal for high • Timken N -40°F (-40°C) to 1.000 to 1,000 f/m Molded-in Applicatioon To 7 psi
misalignment applications 200°F (93°C) 5.000 (5.1 m/s) carbon dependent (0.4 bar)
• Low-speed service • Timken ES -40°F (-40°C) to (25.4 to steel garter
• Increased misalignment 300°F (150°C) 1270.0)
capability over standard 26 • Timken V -22°F (-30°C) to
400°F (204°C)
Model 50 • General purpose seal • Timken N -40°F (-40°C) to 5.000 to 1,000 f/m Molded-in 0.010 To 35 psi
• Low-speed service 200°F (93°C) 12.000 (5.1 m/s) carbon (0.25) (2.4 bar)
• Moderate pressure (127.0 to steel garter
304.8)
Model 54 • Special purpose assembled seal • Timken N -40°F (-40°C) to For 1,000 f/m Stainless N/A To 50 psi
• Excluder seal 200°F (93°C) spherical (5.1 m/s) steel finger (3.4 bar)
• Designed for spherical bearing radii from
applications 2.375 to
8.000
(60.33 to
203.2)
Model 57 • General purpose seal • Timken N -40°F (-40°C) to 2.000 to 500 f/m Molded-in 0.015 @ 500 To 7 psi
• Metal reinforced rubber O.D. 200°F (93°C) 12.000 (2.5 m/s) carbon (0.38 @ 2.50) (0.4 bar)
• Reverse bevel lip design • Timken ES -40°F (-40°C) to (50.8 to steel garter
prevents lip rollover 300°F (150°C) 304.8)
• Available in single & dual lip • Timken V -22°F (-30°C) to
• Ideal for slow-speed service 400°F (204°C)
applications (continuous casters)
Model 58 • High-temp, general purpose • THERMO-CERAM™ To 1600°F 2.000 to 500 f/m N/A 0.015 @ 500 Ambient
assembled seal (871°C) 12.000 (2.5 m/s) (0.38 @ 2.50)
• Stainless steel outer case (50.8 to
• THERMO-CERAM™ sealing 304.8)
element
• Ideal for abrasive environments
• Grease lubricated apps only
Model 62 • Assembled seal • PTFE -120°F (-85°C) to 0.437 to 2,000 f/m Carbon 0.005 @ 2,000 To 7 psi
• Solid design 400°F (205°C) 20.000 (10.2 m/s) steel garter (0.13 @ 10.20) (0.4 bar)
• Low-speed service (11.1 to
• Excellent chemical resistance 508.0) in
max seal
O.D.
17
Configurations Bearing Isolators
Metallic Isolator – Metallic Isolator – Metallic Isolator – Metallic Isolator – Metallic Isolator –
Flanged Flangeless Narrow Width Small C-S SPB
Metallic Isolator – Metallic Isolator – Metallic Isolator – Non-Metallic Isolator Non-Metallic Isolator
Step Shaft Vertical Vertical (Glass-Filled PTFE) – (Glass-Filled PTFE) –
Flanged Flanged
Non-Metallic Isolator Non-Metallic Isolator Non-Metallic Isolator Non-Metallic Isolator Non-Metallic Isolator
(Glass-Filled PTFE) – (Glass-Filled PTFE) – (Glass-Filled PTFE) – (Glass-Filled PTFE) – (Glass-Filled PTFE) –
Flangeless Grease Purge Small C-S SPB Step Shaft
Non-Metallic Isolator Non-Metallic Isolator Metallic Isolator Metallic Isolator Non-Metallic Isolator
(Glass-Filled PTFE) – (Glass-Filled PTFE) – (Microcellular Filter) (Microcellular Filter) (Graphite-Filled PTFE)
Vertical Vertical Flangeless
18
Bearing Isolators Configurations
Width
Flange
Bore Width
Bore
Diameter Engagement
Flange Diameter
Shaft
Diameter
Metallic Isolator
Flange Bore
Seal Sizes Description Material Width
Width Engagement
Code Prefix
29602 Standard Bronze 0.700 0.325 0.375
29604 Standard 316 Stainless Steel 0.700 0.325 0.375
29606 Small Cross Section 316 Stainless Steel 0.625 0.375 0.250
29607 Small Cross Section Bronze 0.625 0.375 0.250
29608 Small Cross Section, Short Flange Bronze 0.625 0.250 0.375
29609 Narrow Width Flangeless Bronze 0.375 N/A 0.375
29610 Small Flanged Bronze 0.700 0.325 0.375
29611 Narrow Width Flangeless 316 Stainless Steel 0.375 N/A 0.375
29612 Flangeless 316 Stainless Steel 0.625 N/A 0.625
29616 Split Pillow Block Bronze 1.000 0.500 0.500
29619 Flangeless Bronze 0.625 N/A 0.625
29620 Vertical Bronze 0.700 0.325 0.375
29621 Vertical - Small Cross Section Bronze 0.625 0.375 0.250
Metallic Isolator
Flange Bore
(Microcellular Filter) Seal Description Material Width
Width Engagement
Sizes Code Prefix
29102 Standard Bronze 0.700 0.325 0.375
29106 Standard 316 Stainless Steel 0.700 0.325 0.375
29119 Flangeless Bronze 0.625 N/A 0.625
Non-Metallic Isolator
Flange Bore
(Glass-Filled PTFE) Seal Description Material Width
Width Engagement
Sizes Code Prefix
29500 Standard Style 2 O.D. O-Rings Glass-Filled PTFE 0.750 0.300 0.450
29502 Standard Glass-Filled PTFE 0.750 0.375 0.375
29507 Small Cross Section Glass-Filled PTFE 0.625 0.375 0.250
29516 Split Pillow Block Glass-Filled PTFE 1.000 0.500 0.500
29518 Grease Purgeable Glass-Filled PTFE 0.820 0.320 0.500
29519 Flangeless Glass-Filled PTFE 0.640 N/A 0.625
29520 Vertical Glass-Filled PTFE 0.760 0.385 0.375
29521 Vertical - Two O.D. O-Rings Glass-Filled PTFE 0.885 0.385 0.500
Non-Metallic Isolator
Flange Bore
(Graphite-Filled PTFE) Description Material Width
Width Engagement
Seal Sizes Code Prefix
24801 Flangeless Graphite-Filled PTFE 0.625 N/A 0.625
24802 Standard Graphite-Filled PTFE 0.625 0.250 0.375
24807 Small Cross Section Graphite-Filled PTFE 0.625 0.250 0.375
19
Product Information Bearing Isolators
Small Cross • Meets NEMA MG 1-2003 • Bronze or 316 -30°F (-34°C) to 0.875 to 12,000 f/m ±0.015 ±0.010 Ambient
• Meets IEEE 841-2001 test standards stainless steel 400°F (204°C) 5.500 (60.9 m/s) (0.38) (0.25)
Section, • Conforms to API 610 construction (22.2 to
Short Flange • No arbor press required for • Filled PTFE 139.7)
installation unitizing ring
• No internal metal-to-metal contact • Fluoroelastomer
• Fits in c/s as small as 0.188" O-rings standard
(4.76mm)
• Short flange width does not
interfere with equipment
Flangeless • Meets NEMA MG 1-2003 • Bronze or 316 -30°F (-34°C) to 0.875 to 12,000 f/m ±0.015 ±0.010 Ambient
IEEE 841-2001 test standards stainless steel 400°F (204°C) 5.500 (60.9 m/s) (0.38) (0.25)
Narrow Width •• Meets
No arbor press required for construction (22.2 to
installation • Filled PTFE 139.7)
• No internal metal-to-metal contact unitizing ring
• Flangeless design fits in spaces • Fluoroelastomer
as narrow as 0.375" (9.53mm) O-rings standard
Flangeless • Meets NEMA MG 1-2003 • Bronze or 316 -30°F (-34°C) to 0.875 to 12,000 f/m ±0.025 ±0.020 Ambient
• Meets IEEE 841-2001 test standards stainless steel con- 400°F (204°C) 10.500 (60.9 m/s) (0.64) (0.51)
• Conforms to API 610 struction (22.2 to
• No arbor press required for • Filled PTFE unitiz- 266.7)
installation ing ring
• No internal metal-to-metal contact • Fluoroelastomer
• Does not extend past face of O-rings standard
housing
Split Pillow • Meets NEMA MG 1-2003 • Bronze or 316 -30°F (-34°C) to 0.875 to 12,000 f/m ±0.025 ±0.020 Ambient
• Meets IEEE 841-2001 test standards stainless steel 400°F (204°C) 10.500 (60.9 m/s) (0.64) (0.51)
Block • Conforms to API 610 construction (22.2 to
• No arbor press required for • Filled PTFE 266.7)
installation unitizing ring
• No internal metal-to-metal contact • Fluoroelastomer
• Standard and custom design for O-rings standard
split pillow blocks
Step Shaft • Meets NEMA MG 1-2003 • Bronze or 316 -30°F (-34°C) to 0.875 to 12,000 f/m ±0.025 ±0.020 Ambient
• Surpasses IEEE 841-2001 test stainless steel 400°F (204°C) 10.500 (60.9 m/s) (0.64) (0.51)
standards construction (22.2 to
• Conforms to API 610 • Filled PTFE 266.7)
• No arbor press required for unitizing ring
installation • Fluoroelastomer
• No internal metal-to-metal contact O-rings standard
• Custom designed for individual
step shaft applications
Vertical, Small • Meets NEMA MG 1-2003 • Bronze or 316 -30°F (-34°C) to 0.875 to 12,000 f/m ±0.025 ±0.020 Ambient
stainless steel 400°F (204°C) 10.500 (60.9 m/s) (0.64) (0.51)
Cross Section • Surpasses
standards
IEEE 841-2001 test
construction (22.2 to
• Conforms to API 610 • Filled PTFE 266.7)
• No arbor press required for unitizing ring
installation • Fluoroelastomer
• No internal metal-to-metal contact O-rings standard
• Fits in c/s as small as 0.188 in.
(4.76mm)
• Vertical design for top
applications only
20
Bearing Isolators Product Information
Small C/S • Filled PTFE construction • FDA compliant -40°F (-40°C) to 0.875 to 4,500 f/m ±0.015 ±0.020 Ambient
• Excellent chemical resistance blue glass filled 400°F (204°C) 11.000 (22.9 m/s) (0.38) (0.51)
• Meets NEMA MG 1-2003 PTFE (22.2 to
• Meets IEEE 841-2001 test standards • Fluoroelastomer 279.4)
• No arbor press required for O-rings standard
installation
• Fits in c/s as small as 0.188"
(4.76mm)
Flangeless • Filled PTFE construction • FDA compliant -40°F (-40°C) to 0.875 to 4,500 f/m ±0.015 ±0.020 Ambient
• Excellent chemical resistance blue glass filled 400°F (204°C) 11.000 (22.9 m/s) (0.38) (0.51)
• Meets NEMA MG 1-2003 PTFE (22.2 to
• Meets IEEE 841-2001 test standards • Fluoroelastomer 279.4)
• No arbor press required for O-rings standard
installation
• Does not extend past face of
housing
Grease • Filled PTFE construction • FDA compliant -40°F (-40°C) to 0.875 to 4,500 f/m ±0.015 ±0.020 5 psi
• Excellent chemical resistance blue glass filled 400°F (204°C) 10.875 (22.9 m/s) (0.38) (0.51)
Purgeable • Meets NEMA MG 1-2003 PTFE (22.2 to
• Meets IEEE 841-2001 test standards • Fluoroelastomer 276.2)
• No arbor press required for O-rings standard
installation
• Relief in seal allows regreasing
with no disassembly of equipment
Split Pillow • Filled PTFE construction • FDA compliant -40°F (-34°C) to 0.875 to 4,500 f/m ±0.015 ±0.020 Ambient
• Excellent chemical resistance blue glass filled 400°F (204°C) 11.000 (22.9 m/s) (0.38) (0.51)
Block • Meets NEMA MG 1-2003 PTFE (22.2 to
• Meets IEEE 841-2001 test standards • Fluoroelastomer 279.4)
• No arbor press required for O-rings standard
installation
• Standard and custom design for
split pillow blocks
21
Product Information Bearing Isolators
Vertical • Filled PTFE construction • FDA compliant -30°F (-34°C) to 0.875 to 12,000 f/m ±0.015 ±0.010 Ambient
• Excellent chemical resistance blue glass filled 400°F (204°C) 5.500 (60.9 m/s) (0.38) (0.25)
• Meets NEMA MG 1-2003 PTFE (22.2 to
• Meets IEEE 841-2001 test standards • Fluoroelastomer 139.7)
• No arbor press required for O-rings standard
installation
• Two O.D. O-Rings for increased
retention in the bore
• Vertical design for top applications
only
Standard C/S • Excellent chemical resistance • Graphite-filled -40°F (-40°C) to 0.875 to 4,500 f/m ±0.015 ±0.015 Ambient
• Multi-position capability PTFE 400°F (204°C) 10.500 (22.9 m/s) (0.38) (0.38)
• No arbor press required for • Fluoroelastomer (22.2 to
installation O-rings standard 266.7)
• Unique pumping/fanning action
• Designed to fit small c/s with no
equipment modification
Flangeless • Excellent chemical resistance • Graphite-filled -40°F (-40°C) to 0.875 to 4,500 f/m ±0.015 ±0.015 Ambient
• Multi-position capability PTFE 400°F (204°C) 6.000 (22.9 m/s) (0.38) (0.38)
• No arbor press required for • Fluoroelastomer (22.2 to
installation O-rings standard 152.4)
• Unique pumping/fanning action
• Does not extend past face of
housing
For larger shaft diameters, please contact your Timken sales representative.
22
Glossary Glossary
Width Shaft
Assembled Seal made up of a group of parts, Elastomer: Synthetic and natural materials that
Seal: including sealing surface(s), provisions are able to be vulcanized and can be
for initial loading and a secondary elongated at least twice their original
sealing mechanism to accommodate length at room temperature, but are
radial movement required for installation able to return to their approximate
and operation. “normal” length when released.
Common material used in the
Axial Gap between element heel and seal lip. manufacture of seals.
Clearance:
End Play: Measurement of axial movement allowed,
Back Lip Angle seen from the back of the seal in reference to the shaft on which the seal
Angle: coinciding with the seal interface. lip comes into contact.
Bearing Product using labyrinth sealing methods Face Lip Angle seen from the face of the seal
Isolator: and other techniques to provide high- Angle: coinciding with the seal interface.
performance sealing technology for
demanding applications in operating Fluid Side: 1.) Refers to face of the seal when
environments with high levels of goal is to retain lubricant. 2.) Refers
contamination. to the back of the seal when goal is
to exclude contamination.
Bonded Assembly in which the insert and/or
Seal: spring is bonded to the elastomer Garter Helically-coiled wire in the form of a
sealing element. Spring: ring that helps maintain a radial sealing
force between the radial seal lip element
Contact Interface where sealing element reacts and a shaft or bore. A close wound
Point: with the shaft or bore housing. spring is used for tension and an open
wound is used for compression.
Contact Line Axial distance from seal face to
Height: contact point. Heel: Part of lip seal case located tangent to
the back of the seal.
Contact Amount of area reacting dynamically in
Width: the axial direction. Hinge: Point at which the seal lip pivots around
the seal assembly.
Dynamic Amount by which a shaft, at the sealing
Runout: surface, does not rotate around the Housing Cylindrical surface that mates with the
true center. Measured by holding a Bore: OD of a standard lip seal’s outer case
dial indicator against the shaft surface or an external lip seal’s contact lip.
while it is slowly rotated. The resulting
measurement is called a total indicator Inclusion: Retaining lubricant by facing the seal in
reading, or TIR. toward the lubricant.
23
Glossary Glossary
Inner Case: Rigid, cup-shaped component within Seal Outer External diameter of the lip seal
a seal assembly that is used as a rein- Diameter assembly that interfaces with the
forcing member, shield, spring retainer (O.D.): housing bore diameter.
and/or lip clamping device.
Shaft Radial distance describing how much
Labyrinth Sealing product that uses an intricate Eccentricity: the geometric centerline of the shaft
Seal: pathway to exclude debris and retain is displaced from the axis of the shaft
lubrication. rotation.
Lip Inner-most diameter of the seal lip, Shaft Lead: Helical grooves in a shaft surface that
Diameter: measured with the spring installed. are caused by relative axial movement
of the grinding wheel to shaft.
Lip Load: Radial force exerted by the seal lip
geometry and spring loading. Expressed “Slip-Stick”: Friction challenge caused by a sealing
as force per unit of shaft circumference. element that adheres to and rotates
with the shaft surface until the elastic
Lip Seal: Elastomeric element that prevents leak- characteristics of the sealing element
age in dynamic and static applications overcome the adhesive force, causing
through means of geometry and loading. the seal lip to loose contact with the
rotating surface long enough to cause
Lubricant Inadequate lubrication at the seal leakage. Normally associated with
Starvation: interface which causes premature non-lubricated and boundary-lubricated
wear of seals. conditions, this cycle repeats itself
again and again.
Offset: Radial distance between the centerlines
of the seal bore and the shaft rotation. Spring A semicircular depression in the head
Groove: section of a seal that accommodates
Outer Case: Rigid structure of lip-seal assembly that
the garter spring.
houses all components of the seal
assembly. Spring Section of the primary lip that restricts
Retaining axial movement of the extension spring
Plunge Surface texture of a shaft or wear
Lip: from its proper position.
Ground: sleeve produced by using a grinding
wheel perpendicular to the rotating Surface Quality, appearance and characteristics
shaft, without axial motion. Finish: of a shaft surface due to processing
such as grinding, burnishing, etc. [See
Primary Lip: Elastomeric sealing element that rides
SAE J488a (June 1963)]
against the rotating surface facing 1.)
inward toward the lubricant for grease Unidirectional/ Type of seal designed for applications
inclusion or 2.) outward from the lubri- Unirotational in which the shaft rotates in only one
cant for contaminant exclusion. Seal: direction.
Radial Lip Assembly containing an elastomeric Unitized Seal assembly in which all the parts are
Seal: element that prevents leakage in Seal: retained in a single package.
dynamic and static applications through
means of geometry and loading. Volume Increase in seal size due to the absorp-
Swell: tion of fluid by the elastomer. Usually
Radial Radial force exerted by the seal lip leads to signs of incompatibility.
Load: geometry and spring loading. Expressed
as a force per unit of shaft circumference. Wear Replaceable metal sleeve used in
Sleeve: assemblies to prevent grooving from
Roughness: Anomalies in the surface texture of the contamination at the seal-shaft interface.
shaft which result from the manufacturing
process. [See SAE J448a (June 1963)] Weepage: Small amount of liquid leakage from a
seal.
Seal Case: Rigid member to which the elastomeric
element is attached.
24
Oil Seals Appendix A – Product Identification by Model Number
Model Prefix Seal Material Description Model Prefix Seal Material Description
25001 Timken N SPLIT 22897 Timken N STD
53T2
25002 SILICONE (SIL) SPLIT 22903 Timken V STD
21
25008 Timken V SPLIT 54 21140 Timken N STD
25018 Timken ES SPLIT
26056 Timken N STD
25003 Timken N SPLIT 57 26057 Timken V STD
25004 SILICONE (SIL) SPLIT 26058 Timken ES STD
23
25006 Timken V SPLIT
25010 Timken ES SPLIT 58 21003 CERAMIC STD
25005 Timken N SPLIT 24700 Timken N STD
24 25029 Timken ES SPLIT 59 24702 Timken V STD
25030 Timken V SPLIT 24715 Timken ES STD
25056 PTFE SOLID 24750 Timken N GYLON EXCLUDER LIP
25 24751 Timken ES GYLON EXCLUDER LIP
25058 PTFE SPLIT 59G1
24752 Timken V GYLON EXLUDER LIP
24600 Timken N SOLID
24602 Timken V SOLID 24060 GYLON GYLON LIP , FLUORO GSKT
24610 Timken N SPLIT 24062 GYLON DBL TANDEM , GYLON LIP,
26 FLUORO GSKT
24612 Timken V SPLIT
24626 Timken ES SOLID 24063 GYLON DBL OPPOSED , GYLON LIP,
24627 Timken ES SPLIT FLUORO GSKT
P/S®I 24076 DT FDA GYLON DBL TANDEM, FDA GYLON
26E 24678 Timken N EXTERNAL SPLIT LIP, FLUORO GSKT
24656 Timken ES HIGH RUNOUT, SPLIT 24125 Std FDA GYLON FDA GYLON LIP, FLUORO
24660 Timken N HIGH RUNOUT GSKT
26HR 24662 Timken V HIGH RUNOUT 24128 DO FDA GYLON DBL OPPOSED, FDA GYLON
24663 Timken N HIGH RUNOUT, SPLIT LIP, FLUORO GSKT
24664 Timken ES HIGH RUNOUT, SOLID 62 21702 PTFE STD
24650 Timken N NO SPRING 21158 Timken N STD
26NS
24652 Timken V NO SPRING 21168 SILICONE (SIL) STD
63
24606 Timken V SPLIT , DUAL LIP 21290 Timken ES STD
24608 Timken N SPLIT, DUAL LIP 21695 Timken V STD
24620 Timken N DUAL LIP 63F1 23078 Timken N FELT
26R1
24622 Timken V DUAL LIP
24629 Timken ES DUAL LIP 23501 Timken ES GYLON EXCLUDER LIP
24648 Timken ES SPLIT, DUAL LIP 63G1 23502 Timken V GYLON EXCLUDER LIP
23503 Timken V GYLON EXCLUDER LIP
50 21020 Timken N GARTER SPRING
23052 Timken ES DUAL OPPOSED LIP -
21022 Timken N METAL BUTTONS SINGLE SPRING
51 21486 Timken N BRASS BUTTONS 23547 Timken N DUAL OPPOSED LIP -
21619 Timken N 63R1
SINGLE SPRING
21086 Timken N STD 23548 Timken N DUAL OPPOSED LIP -
21095 SILICONE (SIL) STD DUAL SPRING
53
21096 Timken ES STD 23627 Timken V DUAL OPPOSED LIP -
21699 Timken V STD DUAL SPRING
63R2
22543 Timken V STD 23769 Timken ES DUAL OPPOSED LIP -
53F1 22544 Timken ES STD DUAL SPRING
22987 Timken N STD 23550 Timken N DUAL TANDEM LIP -
22627 Timken N STD DUAL SPRING
63T2
53R2 22634 Timken ES STD 23552 Timken V DUAL TANDEM LIP -
23708 Timken V STD DUAL SPRING
• Note: Please see Appendix B on page 30 for obsolete seal model to part number conversions.
25
Appendix A – Product Identification by Model Number Oil Seals
Model Prefix Seal Material Description Model Prefix Seal Material Description
23549 Timken N DUAL TANDEM LIP - 21332 NITRILE (NIT) MODEL 142 ELEMENT,
63TB
SINGLE SPRING FACE SEAL WITH HOSE
21238 Timken N STD CLAMP
21243 SILICONE (SIL) STD 21333 NITRILE (NIT) MODEL 145A2 ELEMENT,
64
21247 Timken ES STD FACE SEAL WITH HOSE
21852 Timken V STD CLAMP
21334 Timken MODEL 145A2 ELEMENT,
22503 Timken N GYLON EXCLUDER LIP FACE SEAL WITH HOSE
64G1 22504 Timken ES GYLON EXCLUDER LIP CLAMP
22505 Timken V GYLON EXCLUDER LIP 143
21335 FLUOROELASTOMER MODEL 145A2 ELEMENT,
71 26001 NITRILE (NIT) BONDED FACE SEAL WITH HOSE
CLAMP
76 26193 NITRILE (NIT) BONDED 21339 Timken MODEL 145A1 ELEMENT,
26080 Timken N STD FACE SEAL WITH HOSE
87 26081 Timken ES STD CLAMP
26097 Timken V STD 21340 NITRILE (NIT) MODEL 145A1 ELEMENT,
FACE SEAL WITH HOSE
26088 Timken N STD CLAMP
88
26588 Timken V STD
21758 NITRILE (NIT) SPECIAL
26186 Timken ES NO SPRING 145A
21761 FLUOROELASTOMER SPECIAL
88NS
26188 Timken N NO SPRING
21700 NITRILE (NIT) STD
91 27023 NITRILE (NIT) BONDED 145A1 21712 Timken STD
92 27063 NITRILE (NIT) BONDED 21722 FLUOROELASTOMER STD
27223 NITRILE (NIT) BONDED 21750 NITRILE (NIT) STD
94 21751 FLUOROELASTOMER STD
27685 FLUOROELASTOMER BONDED 145A2
21754 Timken STD
111 21011 Timken N EXTERNAL
21738 FLUOROELASTOMER SPECIAL
113 21012 Timken N EXTERNAL 145L
21748 NITRILE (NIT) SPECIAL
123 21016 Timken N EXTERNAL 145S 21749 NITRILE (NIT) SPECIAL
• Note: Please see Appendix B on page 30 for obsolete seal model to part number conversions.
26
Oil Seals Appendix A – Product Identification by Model
Appendix NumberIdentification by Model Number Bearing Isolators
A – Product
• Note: Please see Appendix B on page 30 for obsolete seal model to part number conversions.
27
Appendix A – Product Identification by Model Number Oil Seals
Prefix Model Seal Material Description Prefix Model Seal Material Description
21003 58 THERMO-CERAM STANDARD CONFIGURATION 21712 145A1 Timken ES STANDARD CONFIGURATION
21011 111 Timken N EXTERNAL 21722 145A1 Timken V STANDARD CONFIGURATION
21012 113 Timken N EXTERNAL 21738 145L FLUOROELASTOMER SPECIAL
21016 123 Timken NE XTERNAL 21748 145L NITRILE (NBR) SPECIAL
21020 50 Timken N GARTER SPRING 21749 145S NITRILE (NBR) SPECIAL
21022 51 Timken N METAL BUTTONS 21750 145A2 Timken N STANDARD CONFIGURATION
21086 53 Timken N STANDARD CONFIGURATION 21751 145A2 Timken V STANDARD CONFIGURATION
21095 53 SILICONE (VMQ) STANDARD CONFIGURATION 21754 145A2 Timken ES STANDARD CONFIGURATION
21096 53 Timken ES STANDARD CONFIGURATION 21758 145A Timken N SPECIAL
21140 54 Timken N STANDARD CONFIGURATION 21761 145A FLUOROELASTOMER SPECIAL
21158 63 Timken N STANDARD CONFIGURATION 21852 64 Timken V STANDARD CONFIGURATION
21168 63 SILICONE (VMQ) STANDARD CONFIGURATION 22503 64G1 Timken N GYLON EXCLUDER LIP
21238 64 Timken N STANDARD CONFIGURATION 22504 64G1 Timken ES GYLON EXCLUDER LIP
21243 64 SILICONE (VMQ) STANDARD CONFIGURATION 22505 64G1 Timken V GYLON EXCLUDER LIP
21247 64 Timken ES STANDARD CONFIGURATION 22543 53F1 Timken V STANDARD CONFIGURATION
21290 63 Timken ES STANDARD CONFIGURATION 22544 53F1 Timken ES STANDARD CONFIGURATION
143 Timken N MODEL 142 ELEMENT, 22627 53R2 Timken N STANDARD CONFIGURATION
21332 FACE SEAL WITH 22634 53R2 Timken ES STANDARD CONFIGURATION
HOSE CLAMP
22897 53T2 Timken N STANDARD CONFIGURATION
143 Timken N MODEL 145A2 ELEMENT,
21333 FACE SEAL WITH 22903 53T2 Timken V STANDARD CONFIGURATION
HOSE CLAMP 22987 53F1 Timken N STANDARD CONFIGURATION
143 Timken ES MODEL 145A2 ELEMENT, 23052 63R1 Timken ES DUAL OPPOSED LIP -
21334 FACE SEAL WITH SINGLE SPRING
HOSE CLAMP
23078 63F1 Timken N FELT
143 Timken VM ODEL 145A2 ELEMENT,
21335 FACE SEAL WITH 23501 63G1 Timken ES GYLON EXCLUDER LIP
HOSE CLAMP 23502 63G1 Timken V GYLON EXCLUDER LIP
143 Timken ES MODEL 145A1 ELEMENT, 23503 63G1 Timken V GYLON EXCLUDER LIP
21339 FACE SEAL WITH
HOSE CLAMP 63R1 Timken N DUAL OPPOSED LIP -
23547
SINGLE SPRING
143 Timken N MODEL 145A1 ELEMENT,
21340 FACE SEAL WITH 63R2 Timken N DUAL OPPOSED LIP -
23548
HOSE CLAMP DUAL SPRING
21486 51 Timken N BRASS BUTTONS 63TB Timken N DUAL TANDEM LIP -
23549
SINGLE SPRING
21619 51 Timken N STANDARD CONFIGURATION
63T2 Timken N DUAL TANDEM LIP -
21695 63 Timken V STANDARD CONFIGURATION 23550
DUAL SPRING
21699 53 Timken V STANDARD CONFIGURATION 63T2 Timken V DUAL TANDEM LIP -
23552
21700 145A1 Timken N STANDARD CONFIGURATION DUAL SPRING
21702 62 PTFE STANDARD CONFIGURATION 63R2 Timken V DUAL OPPOSED LIP -
23627
DUAL SPRING
• Note: Please see Appendix B on page 30 for obsolete seal model to part number conversions.
28
Oil Seals Appendix A – Product Identification by Model Number
Appendix A – Product Identification by Prefix Oil Seals
Model Prefix Seal Material Description Model Prefix Seal Material Description
23708 53R2 Timken V STANDARD CONFIGURATION 24752 59G1 Timken V GYLON EXCLUDER LIP
63R2 Timken E SDUAL OPPOSED LIP - 25001 21 Timken N SPLIT
23769
DUAL SPRING 25002 21 SILICONE (VMQ) SPLIT
PS I (61) GYLON GYLON LIP , FLUORO 25003 23 Timken N SPLIT
24060
GASKET
25004 23 SILICONE (VMQ) SPLIT
PS I (61) GYLON DOUBLE TANDEM, GYLON
24062 24 Timken N SPLIT
LIP, FLUORO GASKET 25005
PS I (61) GYLON DOUBLE OPPOSED, GYLON 25006 23 Timken V SPLIT
24063
LIP, FLUORO GASKET 25008 21 Timken V SPLIT
PS I (61) GYLON GYLON LIP, REVERSE LIP, 25010 23 Timken ES SPLIT
24064
FLUORO GASKET
25018 21 Timken ES SPLIT
PS I (61) GYLON GYLON LIP - FDA , GYLON
24125
GASKET 25029 24 Timken ES SPLIT
24600 26 Timken N SOLID 25030 24 Timken V SPLIT
24602 26 Timken V SOLID 25056 25 PTFE SOLID
24606 26R1 Timken V SPLIT , DUAL LIP 25058 25 PTFE SPLIT
24608 26R1 Timken N SPLIT, DUAL LIP 26001 71 NITRILE (NBR) BONDED
24610 26 Timken N SPLIT 26056 57 Timken N STANDARD CONFIGURATION
24612 26 Timken V SPLIT 26057 57 Timken V STANDARD CONFIGURATION
24620 26R1 Timken N DUAL LIP 26058 57 Timken ES STANDARD CONFIGURATION
24622 26R1 Timken V DUAL LIP 26080 87 Timken N STANDARD CONFIGURATION
24626 26 Timken ES SOLID 26081 87 Timken ES STANDARD CONFIGURATION
24627 26 Timken ES SPLIT 26088 88 Timken N STANDARD CONFIGURATION
24629 26R1 Timken ES DUAL LIP 26097 87 Timken V STANDARD CONFIGURATION
24648 26R1 Timken ES SPLIT, DUAL LIP 26186 88NS Timken ES NO SPRING
24650 26NS Timken N NO SPRING 26188 88NS Timken N NO SPRING
24652 26NS Timken V NO SPRING 26193 76 NITRILE (NBR) BONDED
24656 26HR Timken ES HIGH RUNOUT, SPLIT 26588 88 Timken V STANDARD CONFIGURATION
24660 26HR Timken N HIGH RUNOUT 27023 91 NITRILE (NBR) BONDED
24662 26HR Timken V HIGH RUNOUT 27063 92 NITRILE (NBR) BONDED
24663 26HR Timken N HIGH RUNOUT, SPLIT 27223 94 NITRILE (NBR) BONDED
24664 26HR Timken ES HIGH RUNOUT, SOLID 27685 94 FLUOROELASTOMER BONDED
24678 26E Timken N EXTERNAL SPLIT
24700 59 Timken N STANDARD CONFIGURATION
24702 59 Timken V STANDARD CONFIGURATION
24715 59 Timken ES STANDARD CONFIGURATION
24750 59G1 Timken N GYLON EXCLUDER LIP
24751 59G1 Timken ES GYLON EXCLUDER LIP
• Note: Please see Appendix B on page 30 for obsolete seal model to part number conversions.
29
Appendix B – Obsolete Oil Seals (Model Number to Part Number Conversions) Oil Seals
Model Prefix Seal Material Description Model Prefix Seal Material Description
21 25051 Timken N 2 BUTT CUTS @ 180 26 24615 Timken N LOW TEMP. Timken N
DEG APART 24617 Timken V SPLIT, NO SPRING
25068 SILICONE (SIL) 2 BUTT CUTS @ 180 24623 Timken V SOLID, NO FABRIC
DEG APART 24624 Timken N SPLIT, NO FABRIC
25089 Timken N RIGHT HAND BEVEL CUT 24646 Timken V SPLIT, NO FABRIC
25254 Timken N 1/8" THK GASKETS 24653 Timken N NO FABRIC IN HEEL
25255 Timken N 3/16" THK GASKETS 24677 Timken ES SOLID, NO FABRIC
23 25019 Timken ES GREEN O.D. SEALANT 24682 Timken V HIGH PRESSURE
25020 Timken ES SOLID, GREEN O.D. SEALANT 24698 Timken N SPLIT TO ISO
25025 Timken N 316 STAINLESS STEEL TOLERENCE STD
SPRING-SPLIT 26E 24640 Timken N EXTERNAL
25036 Timken N ISO TOLERENCE STANDARDS
26HP 24680 Timken N HIGH PRESSURE
25044 Timken V LEFT HAND BEVEL CUT
25075 Timken N 2 BUTT CUTS, 1/3 & 2/3 51 21021 Timken N NO SPRING
SECTIONS 53 21060 Timken N ISO TOLERANCE STD
25077 Timken N SOLID, SPECIAL 21082 Timken ES NO OD SEALANT, STAMP
25080 SILICONE (SIL) 2 BUTT CUTS @ 180 Timken ES
DEG APART 21083 Timken ES METAL BUTTONS, ISO STD
25084 SILICONE (SIL) SOLID 21084 Timken ES ISO TOLERANCE STD
25086 Timken N NOTCHES 21092 Timken N
25090 SILICONE (SIL) RIGHT HAND CUT 21094 Timken ES
25109 Timken N EXTERNAL CONSTRUCTION 21097 Timken ES
25114 BUTYLSPLIT 21099 Timken ES GREEN O.D. SEALANT
25131 Timken N 2 BUTT CUTS, 3/16" GASKET 21100 SILICONE (SIL)
25152 Timken N SPECIAL 21101 FDA SILICONE (SIL) FDA SILICONE
25153 SILICONE (SIL) SOLID, W/ GARTER SPRING 21366 Timken N LOW TEMP NTRILE
25156 Timken N SOLID, SPECIAL 21381 BUTYL
25157 SILICONE (SIL) SEMI-FINISHED, UNCUT 21392 BUTYL
25168 Timken ES NOTCHES 21446 SILICONE (SIL)
25204 Timken N 1/8" THK GASKETS 21657 Timken N O.D. SEALANT
25205 Timken N 3/16" THK GASKETS 21682 Timken V GREEN Timken V
25206 Timken N 1/4" THK GASKETS 21692 Timken V O.D. SEALANT
25229 SILICONE (SIL) ENCAP SPRING 21706 Timken N DRAW HOLES
25230 SILICONE (SIL) 1/8" THK GASKETS 21733 Timken V NO SPRING
25270 Timken V ENCAP SPRING 21836 Timken N LOW TEMP
25278 Timken N ENCAP SPRING, SPECIAL 21882 Timken V
25279 Timken N 2 LEFT HAND BEVEL CUTS, 53F1 22992 Timken N
CUT 1/3 & 2/3 SECT
22995 Timken ES
25280 Timken N RIGHT HAND BEVEL
CUTS,CUT 1/3 & 2/3 SECT 22996 Timken V
25281 Timken N SOLID, SPECIAL 22998 SILICONE (SIL)
25284 FDA SILICONE (SIL) ENCAP SPRING, FDA 53R2 22628 Timken N
25285 FDA SILICONE (SIL) ENCAP SPRING, FDA - SOLID 22629 FDA SILICONE (SIL)
25305 Timken V NO SPRING 23703 SILICONE (SIL)
25 25074 PTFE 302 STAINLESS STEEL
SPRING SOLID
30
Oil Seals Appendix B – Obsolete Oil Seals
Appendix (Model Number
B – Obsolete Oil Sealsto(Model
Part Number
NumberConversions)
to Part Number Conversion) Oil Seals
Model Prefix Seal Material Description Model Prefix Seal Material Description
53T2 22898 Timken N WHITE GYLON LIP , FDA
22899 FDA SILICONE (SIL) FLUORO GSKT
22905 Timken ES 24073 FDA GYLON FDA WHITE GYLON LIP ONLY
23051 SILICONE (SIL) 24105 GYLON FLUORO LIP ONLY
53TB 22807 Timken N 24108 PTFE PTFE LIP, FLUORO GSKT,
304SS INNER CASE
54 21883 Timken N 24130 FDA GYLON REVERSED LIP, FDA
57 26059 SILICONE (SIL) WHITE GYLON LIP, FDA
26061 SILICONE (SIL) MODIFIED DUST LIP FLUORO GSKT
58 21008 CERAMIC 62 21154 PTFE WHITE PTFE, STAINLESS
STEEL SPRING
21009 CARBON FLMNT
21155 PTFE WHITE PTFE
59 24705 Timken V 21653 PTFE WHITE PTFE, STAINLESS
24710 Timken N SPECIAL STEEL SPRING
24711 Timken N 21777 PTFE STAINLESS STEEL SPRING
24718 Timken ES STAMP “Timken ES” 21844 PTFE STAINLESS STEEL SPRING
ON CASE 21867 PTFE NO SPRING
24719 Timken N NO SPRING METAL 21954 PTFE NO SPRING
BUTTONS
24735 Timken ES SPECIAL EXCLUDER LIP 63 21162 Timken N
24737 Timken ES NO SPRING 21172 FDA SILICONE (SIL) FDA APPROVED SILICONE
24738 Timken ES BLUE COATING ON 21175 FDA SILICONE (SIL) FDA APPROVED SILICONE
INNER SHELL 21186 SILICONE (SIL)
24740 Timken V ELEMENT ONLY-SPLIT 21295 Timken ES
24741 Timken V ELEMENT ONLY-SPLIT- 21296 Timken ES
NO SPRING 21374 BUTYL
24744 Timken N 5/16" METAL BUTTONS 21466 Timken N SPECIAL
24755 Timken N SPECIAL WIDTH 21474 SILICONE (SIL) NO SPRING
TOLERANCE TO BE +/-.008" 21480 SILICONE (SIL)
24757 Timken V 24769Timken ES.156" 21688 Timken N DRAW HOLES
METAL BUTTONS
21690 Timken V GREEN Timken V
24772 Timken ES .197"(5mm) METAL BUTTONS
21707 Timken N DRAW HOLES
24773 Timken N
21760 Timken N DRAW HOLES, O.D.
59G1 24734 Timken V GYLON EXCLUDER LIP SEALANT
24753 Timken ES GYLON ENHANCED, 21890 Timken N
METAL BUTTONS 21933 SILICONE (SIL) O.D. SEALANT
59R1 24720 Timken N 63F1 23670 Timken N
24726 Timken N
63G1 23501 Timken ES GYLON EXCLUDER LIP
61 P/S® I24057 PTFE PTFE LIP , Timken 23502 Timken V GYLON EXCLUDER LIP
N GSKT
23503 Timken V GYLON EXCLUDER LIP
24059 FDA GYLON DBL TANDEM, FDA WHITE
GYLON LIP, FDA WHITE 63R 23169 Timken V NO SPRING
GYLON GSKT 63R1 23605 Timken N
24061 FDA GYLON FDA WHITE GYLON LIP, 63R2 23046 Timken N
FLUORO GSKT
23631 Timken V
24070 GYLON REDUCED LOAD , BLACK
GYLON LIP , FLUORO GSKT 23689 Timken N
24072 FDA GYLON DBL OPPOSED, FDA 23747 Timken N SPECIAL
31
Appendix B – Obsolete Oil Seals (Model Number to Part Number Conversions) Oil Seals
Model Prefix Seal Material Description Model Prefix Seal Material Description
63T2 23713 FDA SILICONE (SIL) FDA SILICONE 67R1 23048 Timken N
23748 Timken V 67T2 23621 Timken N
63TB 23690 Timken N 68 21910 Timken N STAINLESS STEEL SPRING
64 21223 Timken N 5/16" METAL BUTTONS 68R2 23724 Timken N STAINLESS STEEL SPRING
21241 Timken ES BLUE COATING ON 23727 Timken N
INNER RING
23736 Timken N STAINLESS STEEL SPRING;
21246 Timken N STAINLESS STEEL SPRING 9010 FILLER RING
21254 Timken N METAL BUTTONS
87 26078 Timken ES NO BUTTONS, .093" THK
21255 Timken ES STAMP “Timken ES” METAL INSERT
ON CASE
21256 Timken N NO SPRINGS 88 26079 Timken N STAINLESS STEEL SPRING
21261 Timken N STAINLESS STEEL 26185 Timken ES NO BUTTONS
GARTER SPRING 88NS 26589 Timken V NO SPRING
21385 SILICONE (SIL) NO SPRING 113 21503 Timken N
21398 Timken V ZINC PLATED FILLER RING 21927 Timken N
21855 Timken V METAL BUTTONS
123 21814 Timken ES
21859 Timken V
21886 SILICONE (SIL) METAL BUTTONS 142 21485 Timken MOLDED LIP ONLY,
BUTT JOINT
21997 SILICONE (SIL)
145A 221757 BUTYL
66 21519 Timken V STAINLESS STEEL SPRING
21913 Timken N STAINLESS STEEL SPRING
21930 Timken N STAINLESS STEEL SPRING
67 21632 Timken N STAINLESS STEEL SPRING
21664 Timken N O.D. SEALANT
21694 Timken N NO SPRING
21763 SILICONE (SIL) STAINLESS STEEL SPRING
21800 Timken N STAINLESS STEEL SPRING
21801 Timken N NO SPRING
21818 Timken ES
21819 Timken ES STAINLESS STEEL SPRING
21827 Timken ES
21944 Timken N
32
Oil Seals Appendix C – Compound Compatibility Chart
Rating Key: 1 = Excellent compatibility up to given temperature 3 = Limited compatibility up to given temperature
2 = Good comp atibility up to given temperature 4 = Poor compatibility up to given temperature
33
Appendix C – Compound Compatibility Chart Oil Seals
Rating Key: 1 = Excellent compatibility up to given temperature 3 = Limited compatibility up to given temperature
2 = Good comp atibility up to given temperature 4 = Poor compatibility up to given temperature
34
Oil Seals Appendix C – Compound Compatibility Chart
Rating Key: 1 = Excellent compatibility up to given temperature 3 = Limited compatibility up to given temperature
2 = Good comp atibility up to given temperature 4 = Poor compatibility up to given temperature
35
Appendix C – Compound Compatibility Chart Oil Seals
Rating Key: 1 = Excellent compatibility up to given temperature 3 = Limited compatibility up to given temperature
2 = Good comp atibility up to given temperature 4 = Poor compatibility up to given temperature
36
Oil Seals Appendix C – Compound Compatibility Chart
Rating Key: 1 = Excellent compatibility up to given temperature 3 = Limited compatibility up to given temperature
2 = Good comp atibility up to given temperature 4 = Poor compatibility up to given temperature
37
Appendix C – Compound Compatibility Chart Oil Seals
Rating Key: 1 = Excellent compatibility up to given temperature 3 = Limited compatibility up to given temperature
2 = Good comp atibility up to given temperature 4 = Poor compatibility up to given temperature
38
Oil Seals Appendix D – Failure Analysis
The diagram below organizes common symptoms with common root causes of seal failure
and is designed to help you:
Leakage
Carbonized Lubricant
Case Damage
40
Oil Seals Appendix D – Failure Analysis Seal Damage Analysis – Appendix D Oil Seals
Problem Problem
Seal fractures or splits Seal element has nicks,
cuts or tears
Problem
Cracks or wear patterns
Potential Cause Potential Solution
develop, hindering sealing
• Excessive load • Upgrade to seal material
capabilities
with higher misalignment
capabilities
• Excessive operating • Upgrade to seal material
Potential Cause Potential Solution temperature with higher temperature
• Insufficient lubrication • Increase lubrication during capabilities
installation
• High internal pressure • Decrease internal pressure
Thermal Delamination
10000 10
9000
RELATIONSHIP BETWEEN RPM, FPM AND SHAFT DIAMETER 9
8000 8
7 1/2
7000 7
6 1/2
10000
6000 6
9000
5500 8000 5 1/2
7000
5000 5
6000
4500 4 1/2
5000
4000 4
4000
3 3/4
3500 3 1/2
3000
3 1/4
3000 2500
3
2000 2 3/4
2500 2.5 2 1/2
1500
2 1/4
2000 2
1000
900 1 7/8
800 1 3/4
700 1 5/8
1500 600 1.5 1 1/2
500 1 3/8
400 1 1/4
1 1/8
300
1000 250 1
15/16
900
200 0.9 7/8
800 13/16
0.8
150
3/4
700
0.7 11/16
100 5/8
600 0.6
90
550 80 9/16
70
500 0.5 1/2
An approximate method of calculating 60
450 peripheral speeds is as follows: Shaft 50 7/16
Diameter (in inches) x RPM x 0.26.
400 40 0.4
3/8
350 30 11/32
25 5/16
300 0.3
20 9/32
7/32
200 0.2
10
3/16
FPM
150 5/32
To convert RPM to FPM, set straight edge on known factors (shaft diameter
and RPM). The center line will indicate FPM. As illustrated above, a 1 inch 1/8
shaft turning 3500 RPM’s converts to 900 FPM.
100 0.1
43
Seals by Model Number
M-2
Using This Catalog
The following pages contain the information you need to make accurate decisions about
the seals best suited for your standard applications. This catalog lists Timken oil seals
and bearing isolators by model number and includes:
Reference chart showing relationship between RPM, FPM and shaft diameters.
To learn about Timken oil seals for non-standard applications, contact your Timken
sales representative.
M-3
Model Number to Part Number Conversion
3 28003 68 21823
21 25001 68R2 23727
23 25003 71 26001
24 25005 76 26193
25 25058
87 26080
26 24600 88 26088
26R1 24620 88NS 26188
53 21086 91 27023
53F1 22987 92 27063
53R1 22537
94 27223
53R2 22627 111 21011
53T2 22897 113 21012
53TB 22807 123 21016
53TF 22994 142 21432
54 21140
145A1 21700
58 21003 145A2 21750
59 24700 EQ 24801
61 24060 EQ 24802
61 FDA 24061 EQ 24807
61 DBL TANDEM 24062
EQSPB 24816
61 DBL OPPOSED 24063 IG 29500
61 REVERSE LIP 24064 IG 29502
62 21702 IG 29507
63 21158 IG 29519
63F1 23078
IGSPB 29516
63R1 23547
63R2 23548
63T2 23550
63TB 23549
63TF 23735
64 21238
66 21527
66F1 23692
66R1 23722
66R2 23702
66T2 23728
66TF 23763
67 21528
67R2 23683
67T2 23621
M-4
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-5
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-6
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-7
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-8
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-9
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-10
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-11
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-12
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-13
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-14
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-15
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-16
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-17
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-18
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-19
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-20
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-21
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-22
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-23
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-24
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-25
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-26
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-27
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-28
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-29
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-30
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-31
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-32
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-33
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-34
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-35
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-36
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-37
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-38
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-39
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-40
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-41
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-42
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-43
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-44
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-45
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-46
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-47
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-48
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-49
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-50
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-51
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-52
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-53
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-54
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-55
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-56
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-57
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-58
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-59
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-60
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-61
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-62
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-63
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-64
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-65
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-66
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-67
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-68
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-69
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-70
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-71
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-72
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-73
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-74
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-75
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-76
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-77
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-78
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-79
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-80
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-81
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-82
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-83
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-84
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-85
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-86
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-87
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-88
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-89
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-90
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-91
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-92
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-93
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-94
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-95
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-96
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-97
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-98
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-99
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-100
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-101
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-102
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-103
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-104
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-105
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-106
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-107
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-108
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-109
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-110
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-111
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-112
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-113
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-114
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-115
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-116
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-117
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-118
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-119
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-120
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-121
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-122
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-123
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-124
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-125
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-126
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-127
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-128
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-129
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-130
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-131
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-132
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-133
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-134
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-135
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-136
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-137
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-138
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-139
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-140
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-141
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-142
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-143
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-144
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-145
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-146
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-147
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-148
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-149
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-150
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-151
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-152
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-153
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-154
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-155
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-156
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-157
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-158
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-159
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-160
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-161
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-162
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-163
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-164
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-165
Face Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-166
Face Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-167
Seals by Shaft size
S-2
Using This Catalog
The following pages contain the information you need to make accurate decisions about
the seals best suited for your standard applications. This catalog lists Timken oil seals and
bearing isolators by shaft size and includes:
Dimensions (inch and metric) for bore and width, model numbers and part numbers.
Part number listing and additional information on inch and metric rod scrapers.
Reference chart showing relationship between RPM, FPM and shaft diameters.
To learn about Timken oil seals for non-standard applications, contact your Timken sales
representative.
S-3
Model Number to Part Number Conversion
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-5
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-6
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-7
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-8
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-9
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-10
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-11
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-12
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-13
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-14
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-15
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-16
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-17
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-18
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-19
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-20
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-21
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-22
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-23
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-24
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-25
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-26
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-27
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-28
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-29
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-30
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-31
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-32
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-33
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-34
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-35
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-36
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-37
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-38
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-39
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-40
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-41
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-42
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-43
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-44
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-45
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-46
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-47
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-48
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-49
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-50
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-51
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-52
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-53
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-54
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-55
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-56
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-57
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-58
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-59
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-60
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-61
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-62
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-63
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-64
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-65
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-66
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-67
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-68
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-69
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-70
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-71
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-72
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-73
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-74
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-75
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-76
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-77
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-78
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-79
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-80
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-81
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-82
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-83
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-84
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-85
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-86
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-87
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-88
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-89
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-90
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-91
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-92
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-93
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-94
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-95
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-96
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-97
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-98
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-99
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-100
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-101
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-102
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-103
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-104
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-105
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-106
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-107
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-108
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-109
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-110
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-111
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-112
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-113
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-114
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-115
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-116
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-117
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-118
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-119
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-120
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-121
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-122
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-123
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-124
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-125
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-126
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-127
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-128
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-129
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-130
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-131
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-132
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-133
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-134
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-135
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-136
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-137
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-138
Oil Seals by Model Number
21238-9280 64-L 14.188 16.732 0.813 360 425 21 24702-4142 59 14.500 16.000 0.688 368 406 17
25003-4138 23-L 14.190 15.690 0.625 360 399 16 21247-4142 64-L 14.500 16.000 0.688 368 406 17
24610-5503 26-L 14.214 16.214 0.812 361 412 21 21937-4142 64-L 14.500 16.000 0.688 368 406 17
25003-7898 23-L 14.214 16.214 0.813 361 412 21 21238-4142 64-L 14.500 16.000 0.688 368 406 17
21221-4118 64-L 14.250 15.750 0.687 362 400 17 21243-4142 64-L 14.500 16.000 0.688 368 406 17
21937-4118 64-L 14.250 15.750 0.688 362 400 17 21852-4142 64-L 14.500 16.000 0.688 368 406 17
21238-4118 64-L 14.250 15.750 0.688 362 400 17 26080-4142 87-L 14.500 16.000 0.688 368 406 17
21773-4118 64-L 14.250 15.750 0.688 362 400 17 26082-4142 87-L 14.500 16.000 0.688 368 406 17
25001-5062 21-L 14.250 15.750 0.750 362 400 19 25010-4143 23-L 14.500 16.000 0.750 368 406 19
25003-5062 23-L 14.250 15.750 0.750 362 400 19 25003-4143 23-L 14.500 16.000 0.750 368 406 19
24700-0227 59 14.250 15.750 0.750 362 400 19 25138-4143 23-L 14.500 16.000 0.750 368 406 19
25003-4691 23-L 14.250 16.000 0.813 362 406 21 25144-4143 23-L 14.500 16.000 0.750 368 406 19
24700-0228 59 14.250 16.000 0.875 362 406 22 25006-4143 23-L 14.500 16.000 0.750 368 406 19
24600-3891 26-L 14.250 16.250 0.625 362 413 16 22504-2132 64G1-L 14.500 16.000 0.813 368 406 21
24602-3891 26-L 14.250 16.250 0.625 362 413 16 25003-5455 23-L 14.500 16.250 0.625 368 413 16
26082-3891 87-L 14.250 16.250 0.625 362 413 16 21086-4144 53-L 14.500 16.250 0.750 368 413 19
26187-3891 88NS-L 14.250 16.250 0.625 362 413 16 25003-9116 23-L 14.500 16.500 0.625 368 419 16
25003-5117 23-L 14.250 16.250 0.750 362 413 19 25001-3728 21-L 14.500 16.500 0.750 368 419 19
24610-5582 26-L 14.250 16.250 0.750 362 413 19 25003-3728 23-L 14.500 16.500 0.750 368 419 19
24610-0229 26-L 14.250 16.250 0.812 362 413 21 21086-3728 53-L 14.500 16.500 0.750 368 419 19
25001-4140 21-L 14.250 16.250 0.813 362 413 21 24752-0234 59G1 14.500 16.500 0.750 368 419 19
25003-4140 23-L 14.250 16.250 0.813 362 413 21 24700-0234 59 14.500 16.500 0.750 368 419 19
25006-4140 23-L 14.250 16.250 0.813 362 413 21 24702-0234 59 14.500 16.500 0.750 368 419 19
24715-0229 59 14.250 16.250 0.813 362 413 21 21247-4145 64-L 14.500 16.500 0.812 368 419 21
24700-0229 59 14.250 16.250 0.813 362 413 21 25003-4145 23-L 14.500 16.500 0.813 368 419 21
21247-4140 64-L 14.250 16.250 0.813 362 413 21 21238-4145 64-L 14.500 16.500 0.813 368 419 21
21238-4140 64-L 14.250 16.250 0.813 362 413 21 21773-4145 64-L 14.500 16.500 0.813 368 419 21
21852-4140 64-L 14.250 16.250 0.813 362 413 21 21243-4145 64-L 14.500 16.500 0.813 368 419 21
21243-4140 64-L 14.250 16.250 0.813 362 413 21 21852-4145 64-L 14.500 16.500 0.813 368 419 21
21238-3855 64-L 14.250 16.500 0.813 362 419 21 26088-4145 88-L 14.500 16.500 0.813 368 419 21
21339-3189 143 14.250 18.312 2.000 362 465 51
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-139
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-140
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-141
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-142
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-143
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-144
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-145
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-146
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-147
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-148
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-149
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-150
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-151
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-152
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-153
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-154
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-155
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-156
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-157
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-158
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-159
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-160
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-161
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-162
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-163
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-164
Oil Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-165
Face Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-166
Face Seals by Model Number
All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-167
S-168
Oil Seals by Model Number
25M 09-16 :29 Order No. 10093 | Timken® is a registered trademark of The Timken Company. | © 2016 The Timken Company | Printed in U.S.A.
The Timken team applies their know-how to improve the reliability and performance of machinery in diverse
markets worldwide. The company designs, makes and markets high-performance mechanical components,
including bearings, belts, gears, chain and related mechanical power transmission products and services.
www.timken.com