CERTIFIED MATERIAL REPORT
CMR_No. :0K1511341810 Date of issue 2016/11/15
‘Customer AL SHARQ FACTORY
Trade Name | S-7018.1 Size 2.6mm * 350 mm
Purchaser's
Lot No. 397070/30708 order Ne -
Applicable :
Specification | AWS A5.1 E7018-1 |
Welding] Shiel Post Weld Heat Treatment
: ‘AS WELDED
curcent| POPP | Gas (te x he) 5
Tensile Test Impact Test (CVN- Joule)
Mechanical
Ys (MPa) TS (MPa) | EL (%)) Temp(c) | xi | x2 | x3 | Avo.
Properties
527 él 29.8 45 Se | ledia |ae le ees)
Spec. 2400 2482 222 2er
Chemical Composition (%6)
c]s f[umlels|muloa|w]v
(Weta Mew )| 9-07 | 0.38 | 1.39 | 0.020} 0.016] 0.24 | 0.04 | 0.01 | 0.01
spec.| $0.15] £0.75] $1.60) <0.035|<0.035|_<0.30) <0.20| <0.30|_<0.08|
Others,
Tested with S-7018.1 4.0mm to obtain the above results
U/C NO. :1F1326209734IMCA DATED SEP.25,2016
OUR BANK:AAALSAR!
‘SAUDI HOLLAND! BANK, RIYADH
Saudi Aral
finessed
Approved by
| Sco - as A Manager Lee, S ia |
HYUNDAI WELDING CO., LTD.
‘Head Ottice 157-37, Samsung-dong, Gangnam-gu, Seoul, Republic of Korea
Pohang Plant 90-5, Jangheung-dong, Nam-gu, Pohang~si, Republic of Korea—T
(CMA No. :0K1511341808
CERTIFIED MATERIAL REPORT
Date of lssue 2019/11/15
Customer AL SHARQ FACTORY
Trade Neme | $-7018.1 Size 2.6 mm + 350 mn
Purchaser's
Lot No. 397110/31112 pear lca
Applicable :
Sreciication | AWS 5.1 E7018-1
elding Shiaiding Post Weld Heat Treatment
Current Ges (exh ne
Tensile Test fmpact Test (CVN ~ Joule)
Mechanical
YS (MPa) TS (MPa) | EL (9%) | Temp.(c) | x1. | x2 | X38 | Avo.
Properties
528 616 25.0 -45 2g | a2 | 32 | 31
Spec. 2400 2482 222 227
‘Chemical Composition (9%)
c}| si jm | ep | s | mf] oj mo} v
(wea Meta )| 0-08 | 0.43 | 1.26 | 0.018 | 0.008] 0.22 | 0.04 | 0.01 | 0.01
Spec,| $0.15] <0.75| 1.60] <0.035|<0.035| 0.30] <0.20] <0.30| 0.08!
Others
OUR BANIGAAALSARI
® @ 2: HYUNDAI
‘Tested with S-7018.1 2.6mm to obtain the above-mentioned mechanical properties.
UC NO. ‘TF1326209734IMCA DATED SEP.25.2013
SAUD} HOLLAND! BANK, RIYADH
[ORIGINAL
report has been Inspected in accordance ith
LI of specification and custoner's requirenents
esa are eee ae
GA Manager_Lee, S. H.
WELDING CO., LTD.
157-37, Samsung~dong, Gangnam~gu, Seoul, Republic of Korea
20-5, Jangheung-dong, Nem-gu, Pohang-si, Republic of KoreaCERTIFIED MATERIAL REPORT |
CMR _No. :OK1511341809 Date of Issue 2013/13/16
Customer AL SHARQ FACTORY
Trade Name S-7018.1 Size 2.6 mm + 350 mm
Purchaser's =
Lot No. 397110/31113 ‘Order No.
Applicable _
Coeltitation | AWS AS.1 €7018~1
ee
jWelding} Shielding Post Weld Heat Treatment
Current} PCEP Gas (0 x br) s
Tensile Test {mpact Test (CVN ~ Joule)
Mechanical
YS (MPa) TS (MPa) EL (9%) | Temp.(c) xt x2 x3 Avg.
Properties:
528 616 25.0 45 28 32 32 31
Spec. 2400 482 222 227
‘Chemical Composition (%6)
Oa ta eG) Gall i |
( Weld Meta | 0-08 | 0.43 | 1.26 | 0.018 |0,008] 0.22 | 0.04 | 0.01 | 0.01
spec,| $0.15] $0.75] 1.60] <0.035]<0.035| <0.30| <0.20] <0.30| 0.08]
Others
‘Tested with S-7018.1 2.6mm to obtain the above-mentioned mechanical properties.
ORIGINAL
We hereby certify that the material covered by this report has been Inspected in accordance with
‘and been found 10 meet the applicable requirements of specification and custoner's reauirenents.
U/C NO. :TF1326209734IMCA DATED SEP.25.2013,
OUR SANK:AAALSARI
‘SAUD HOLLAND! BANK, RIYADH
GA Manager_Lee, S.H.
HYUNDAI WELDING CO., LTD.
Head Office 157-37, Samsung-dong, Gangnam~gu, Seoul, Republic of Korea
Poheria Plant 90-5, Jangheung-dong, Nem-gu, Pohang-si, Republic of Korea