Paste the shoe sole test piece on the metal block attached to the test piece of the James anti-skid testing machine and place it on the horizontal floor interface. Place the weight on the metal block attached to the test piece to subject the test piece to a fixed force , By pulling the control lever of the James anti-skid testing machine, the horizontal floor interface moves forward until the sole test piece and the horizontal floor interface slide relatively horizontally. The friction coefficient value corresponding to the relative horizontal sliding of the shoe sole test piece is the maximum static friction coefficient of the tested shoe sole on the floor interface, that is, the anti-skid coefficient. 2. Reference standards: Comply with ASTM F489-96 and other standards. 3. Technical specifications: 1. Weight: 25IB/pc*3pcs. 2. Weight holder: 5IB. 3. Speed: 25.4mm/sec. 4. Sample size: 76*76*6.4mm. 5. Volume: 63*47*158mm. 6. Weight: 150kg. 7. Power source: AC220V, 10A. 4. random accessories: 1). 1 knife mold. 2). 50 sheets of anti-slip coefficient paper. 3). Two PVC interfaces.