Version: AO
Hii nypontecu Nos HPL OAR.
No. Inepecton tem Description | Inspection |
° Tree
Te vrs dean wh ovale sci: ;
The cmectris stale sec ae comet, |
Ale srs ae ald sour wth ro ate |
1 | oatnspecion The speatcntnf alte tl ae conc ped clay nd placed ithe cree | Passed
lotion
Correct and complete accessories;
‘The packaging isin good condition:
The rated currentis 16A at over-curent protection device inthe cicul, max. rated
resistance s 0.1 at the protective connection,
IF rated curent > 16A at overcurrent protection device inthe circuit, max. rated
voltage drop of2.5V at most ofthe protective connection;
Ifthe test to earth and secondary side 2200Vde between DC input and AC output,
hen the nee 10mA
‘The maximum input current or power < 110% ofthe nominal maximum input valve;
‘The output curent or power £ 110% of the ‘
‘The corresponding inverter coulé be on/off successfully based on voltage input,
{allure and fault recovery:
2 Protective connection
3 Insulation and Hipot test
4 Electical parameters
5 Automatic power OOH
‘When the inverter disconnect tothe grid caused by afi eror, after gid voltage and
6 Reconnection to the grid frequency return to normal range, the inverter should reconnect to gr within 20s to
5a
Communication function
7 ‘The inverter successfuly communicates with PC through RS485 port.
qualification
Insulation resistance
‘The test for ground impedance = Umax PV/SOmA before powering on,
“The efficiency at maximum power PSBKW isa least 96.5%, the maximum efficiency
at power BkW