Professional Documents
Culture Documents
2000W
TABLE OF CONTENTS
1 Safety Information......................................................................................................................1
1.1 Security Identifiers.................................................................................................................1
1.2 Laser Safety Grade................................................................................................................ 1
1.3 Security Identifiers.................................................................................................................2
1.4 Optical Safety........................................................................................................................ 3
1.5 Electrical Safety.....................................................................................................................3
1.6 Other Safety Rules.................................................................................................................3
2 Product Description....................................................................................................................4
2.1 Features..................................................................................................................................4
2.2 Model description.................................................................................................................. 4
2.3 Package accessories............................................................................................................... 5
2.4 Unpacking and Inspection..................................................................................................... 5
2.5 Operation Environment......................................................................................................... 5
2.6 Attentions...............................................................................................................................7
2.7 Specifications.........................................................................................................................7
3 Installation.................................................................................................................................11
3.1 Dimensions.......................................................................................................................... 11
3.1.1 Overall dimensions of RFL-C2000 small laser............................................................ 11
3.2 Size and installation of output optical cable........................................................................ 12
3.2.1 RFL-C1000 ~ RFL-C2000 Output Optical Cable........................................................ 12
3.3 Cooling system installation and requirements.....................................................................13
3.4 Installation rules...................................................................................................................14
4 Using the Product..................................................................................................................... 16
4.1 Front panel........................................................................................................................... 16
4.2 Rear Panel............................................................................................................................16
4.3 Power Connection................................................................................................................17
4.4 Interface definition...............................................................................................................18
4.4.1 Control interface........................................................................................................... 18
4.4.2 RS-232 serial port......................................................................................................... 19
4.4.3 Ethernet TCP / IP interface and connection steps........................................................ 21
4.5 Installation Instruction......................................................................................................... 23
4.6 Start operation sequence...................................................................................................... 24
4.7 Control mode selection........................................................................................................ 25
4.7.1 Control mode wiring diagram.......................................................................................25
4.7.2 Stand-alone mode (internal control mode) (connect 4.6 in sequence)......................... 26
Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of 2000W fiber laser
4.7.3 External control mode (sequentially connected to 4.6)................................................ 26
4.7.4 AD Mode...................................................................................................................... 27
4.7.5 controlling time-series chart......................................................................................... 28
4.7.6 Red Light Control......................................................................................................... 29
4.8 Turning off the laser:........................................................................................................... 29
5 Common Alarms and solutions............................................................................................... 30
5.1 Alarm display.......................................................................................................................30
5.2 Alarm processing................................................................................................................. 30
6 Warranty, Return and Maintenance...................................................................................... 33
6.1 General Warranty.................................................................................................................33
6.2 Limitations of Warranty...................................................................................................... 33
6.3 Service and Repair............................................................................................................... 34
Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of 2000W fiber laser
1 Safety Information
Thank you for choosing Raycus fiber laser. This User Guide provides
important safety, operation, maintenance and other information. Please read it
carefully before using this product. To ensure safe operation and optimal
performance of the product, please follow all warnings, cautions, operating
procedures and other instructions accordingly.
This series of lasers are classified as a high power Class 4 laser instrument
accounting to the European community standards EN 60825-1, clause 9. This
product emits invisible laser radiation at wavelength of 1080 nm, and the light
power is 100-2000W (depending on the model). Under such high power of laser
radiation, it may cause damages to the eyes or skin directly or indirectly. Despite
the radiation being invisible, the beam may cause irreversible damages to the retina
and cornea. Therefore, appropriate and approved laser goggles must be worn all
the times when the fiber laser is operating.
WARNING: Users must use appropriate laser goggles
when operating this device. The laser goggles are selected
according to the range of wavelength emitted from this
product. Users must select the appropriate laser goggles
according to the entire range of laser wavelengths. Please do
not directly look at the fiber delivery cable connector when
laser is powered on.
1
7 5
4: CE Authentication 5: ID Label
Any dust on the end of the collimator assembly can burn the lens.
1)Make sure the product is firmly grounded through the PE line of the power
cord.
1)Do not directly look the laser fiber delivery cable connector when laser emitting.
Avoid using the laser in a dark environment.
2)Do not use fiber lasers in dark environment.
3)If this device is used in a manner not specified in this document, the protection
provided by the device may be impaired and the warranty will be voided.
4)There are no user serviceable parts, equipment or assemblies inside the product.
All service and maintenance shall be performed by Raycus. In order to prevent
electric shock, please do not break the seal or uncover the shield. Failure to
comply with this instruction will void the warranty.
2.6 Attentions
1) Make sure that the correct voltage (according to Table 3) is used before
connecting AC current. Failure to connect power supply will damage the
device.
2) Failure to operate the laser in accordance with the control or adjustment
methods specified in this manual may cause damage.
3) For the output laser collimated by the collimating lens, it is important to
keep the collimating lens clean, and otherwise it will damage the device.
4) Please cap the fiber delivery cable connector when it is not in use. Do not
touch the output lens at any time. Use appropriate lens paper and alcohol
to clean it if necessary.
5) Failure to follow the instructions may cause laser power loss, and such
loss is not covered by warranty.
2.7 Specifications
<50
Weight(kg)
Operating Ambient
10~40
Temperature (℃)
Humidity(%) <70
Storage
-10~60
Temperature(℃)
Cooling Method Water Cooling
3 Installation
3.1 Dimensions
3.1.1 Overall dimensions of RFL-C2000 small laser
Figure 2 shows the dimensions of the RFL-C2000 laser.
Before the laser output cable is assembled, the lens and the
cutting head cavity must be clean and free of pollution.
Keep the protective cap properly, prevent it from
contamination; or the aperture will be contaminated when
capped.
Power 380±15% V AC
supply 50/60Hz
Power cord
Power cord
Four strands, marked L1, L2,L3 and PE respectively
end
L1->Phase line (brown)
Label L2 -> Phase line (gray)
description L3 -> Phase line (black)
PE->Protective earth wire (yellow green)
Insert the plug at the end of the power cord into the socket marked "AC INPUT"
Note on the rear panel. Note that the plug has anti-reverse connection function. After
plugging it in, lock it with a lock.
4.4 Interface definition
4.4.1 Control interface
Figure 7 shows the DB25 control interface diagram:
Reserve
Short
10 emergency
circuit
stop
Analog External analog 0V 10V
12 Analog 0-10V <10mA
input quantity setting (0%) (100%)
Laser Analog Optical power signal 0V 3.3V
13 <10mA
Power output output (0%) (100%)
Analog
14 AGND 12, 13 feet return 0V
ground
Digital Laser modulation
15 MOD+ 5-24V 5V 24V <10mA
input signal
Return
16 MOD- 15 feet return 0V
port
Digital
17 Red Laser Red light control 5-24V 5V 24V <10mA
input
Digital
18 Laser EN Laser enable 5-24V 5V 24V <10mA
input
Digital
19 Ready Laser ready EVCC <100mA
output
Digital
20 EGND 17, 18, 21 feet return 0V
ground
Digital
21 EX_RST Laser fault reset 5-24V 5V 24V <10mA
input
Laser Digital
22 Laser ready EVCC <100mA
Error output
External voltage for
Digital
23 EVCC output of Ready and 5-24V 5V 24V <100mA
input
Error signals
Not allowed to
Other NC
connect
Control card
AC input/
regulator
external enable
Laser
Control card
AC input/
regulator
5) Turn on the rocker switch, and the panel "power" indicator light is on
6) Wait for 20s, internal main control board circuit initialization is completed
7) Set laser power (laser power is set by 0-10V analog when AD mode is
enabled, laser power is set by serial port or Ethernet when AD mode is
off)
8) Send a light enable signal to the laser in one of the following ways
●Interface gives light enabling signal (connect 24V between pin18 and
pin20)
●serial port or Ethernet interface to issue the shutter open
command-enable light
9) The On/Off of the laser is controlled by the "modulation" signal provided
by the external mod interface;
Shutdown the laser, please refer to 4.8
4.7.4 AD Mode
The laser enters the external AD mode through the upper computer selection.
The laser power is controlled by the voltage between pin12-14 of DB25 control
interface (0v-0% power, 10v-100% power).
If the upper computer selects external AD mode off, the laser power is set by
serial port or Ethernet, and the Raycus hand-heldwelding laser will enter external
ad mode by default when powered on.
© 2019 Wuhan Raycus Fiber Laser technologies Co. Ltd, All Rights Reserved.