Professional Documents
Culture Documents
http://getghiro.org
Import the .OVA file in your virtualization software (i.e. VirtualBox or Vmware).
For example in VirtualBox go in File > Import Appliance and select the .OVA file.
For extra security, remember to change the password at your first access.
The first time you have to properly configure the network interface.
Select the virtual networking you like (for example
bridged or NAT); by default the appliance is configured in bridged mode.
By default, Ghiro appliance will get an IP address using DHCP and show it in
the boot screen, just put it in a browser.
If you need to manually configure your IP address: login in, and configure the
networking card with your desired IP, for example to
give the IP 192.168.0.10 use the following command:
When Ghiro apppliance has an IP address, via DHCP or via manual configuration,
the web interface is reachable on default HTTP port 80/tcp, just put the
appliance address in your browser. For example:
For extra security, remember to change the password at your first access.
Now you can start analyzing images! Go in the "Cases" panel, create your first
case, and add your images with the add button.
For usage help please refer to the documentation at:
http://docs.getghiro.org/en/latest/usage/appliance.html
If you need to access remotely to the appliance you can use SSH.
The appliance is shipped with a default disk of 50GB, if is not enough you can
create another virtual disk and add that to the root volume using LVM.