SOFT31 (DN 15-25)
Single Orifice Float Trap
with SLR and/or TV
Marshall
Trusted Partners.
Innovative Solutions.
a” Forbes
p-
Description
The Forbes Marshal Single Orifice Float Trap, SOFT3}, is 2
cast iron single orfce float trap available wth an integral
‘automatic air venting facility, It is available with horizontal or
vertical connections with flow downwards. As an alternative
‘a manual neecle valve can be added and used as a steam
lock release,
Sizes and Pipe Connection
ON 15, 20 and 25 Screwed 8SPINPT
Note: Available with IBR certificate on request
Available Types
SOFT31-T TV with Thermostatic aie Vent (TV)
SOFT31- with Steam Lock Release (SLR)
SOFT31-ST combined TY and SLR
Limiting Conditions
SS
SOFT31-13 TB barg Gr. CAO
Cold hydraulic test pressure 26 barg 6 [inate set
Operating range assembly screws
20 &,_[Bat oat & lever [Stainless Steel ype 304] ASTM AZO
o” 3._[Air vent element [Stamlss Steel ype 316] ASTM A20
g 70. [SiR unt Stainless Steel Type 410] ASTIM A276
£100 77._[ SiR unt gasket_[Stainfes Steel Type 304] ASTIN A260
2 so 12. [Poot frame | Stainless Stel ‘ASTM A240
a ‘ype 304
o 2 4 8 6 a3 73._ [SUR Seal [Graphite
Pressure bar g
Dimensions (approx. in mm:
seco) [a |e | c [ov |e | F&F [wetg
1/20 (wen)| 121 | 107 | 67 | 1a7[105[ 30 [2.5
15720 8) [130] 108 | 72 | 152 120[ 20 [29
25 (BRNGR| 147 | Tos] 72 | 160] 135| 20 [ao
General Tol : 13
Energy Conservation | Environment! Process Efficiency www forbesmarshall.com
Forbes Solr | Forbes vyncke | Forbes Marshall Steam Systems
bes Marshall Covel ] Krohn MarshalCapacity Chart How to Fit - General
With suitable isolation, repair can be caried out withthe
‘rap online. When reassembling it's advisable to make sure
‘that alljint faces are clean
How to Fit Main Valve Assembly
+ Remove cover bolts U and if off cover
+ Remove complete fioat assembly by undoing the two screws D.
+ Remove main valve seat A and replace with a new one supplied
with 3 new gasket 8
+ Fitcomplete new float assembly by tightening the assembly set
screws D.
+ Refit the cover using new gasket T.
FSSIDEIS/TISOFTSTIONTS-2S)V1.80
Condensate (eih)
How to Fit Air Vent Assembly
+ Remove spring clip L, element H and spacer plate M.
+ Unscrew seat, frame N assemble spacer plat, fit
‘element and dio.
+ Align complete ar vent horizontally so thatthe frame
ears the cover.
Recommended Tightening Torques
of ts producs without nce, Th contants of ths publston ae the pronary of FM and cannctbereoroduced ty any othe: party without
Torque
hs Part @ | ay
spnvarg nears ManVabe Seat) _[igmmArr] 50/55
ore Man Vale Assembly Screws (0) 258
How to Order
DN 15 Single Orifice Float Trap, SOFI31-F4.5 bar g, Arent Seat) tZmm AF S055.
WY screwed BSP Steam Lock Release Seat ®) | 17mm AF| 50/55
Available Spares Cover Balls 7mm at] 405
The parts available as spares ae shown in heavy outne How to Order Spares
Parts drawn in dated line are not available as spares Always order spares by using the description given in the
Main valve assembly with Float [| A, 8.C,D, 2 OFF)EF] column above and stating the sizeof the trap.
lr Vent Assembly HALLMAN Example : Main valve assembly for ON 15 Single Orifice
‘Steam Lock Release Unt OP Float Trap SOFT31-7-45
Cover Gasket (packet of 5 +
Fat c
Screen Pace oF ST =
ae et een Cea eed)
rene meses eeer eta amu eee
Tel: 91(0}213-5393400
ZW Forbes _ forbes Marshall pvt. rd Re ace)
aes
et
ce or See