Professional Documents
Culture Documents
10
IS3
9
8
7
6
5
4
3
2
1
IS3
CHANNEL
IS3
SPECIFICATIONS
Mode
Brightness
FUNCTION
MOUNTING: Kino Flo® Center-Mount Ball & Socket
or Zylight Yoke Mount
DIMMING: 0% ↔ 100%
USER GUIDE
Zylight LLC
152 SE 5TH Avenue, Suite C
Hillsboro, OR 97123 USA
+1-978-244-0011
www.zylight.com
support@zylight.com
Hint: Press the Units button to change Color Correction units While in DMX mode, all other IS3 controls are disabled.
48v Power Connector between ±10.0 and ∆uv. DMX Channel Assignments are listed on the rear of this
manual. The IS3 uses an industry standard DMX
Dimming: pinout configuration:
The IS3 has a built in dimmer that will dim the light from
0 - 100% with a minimal color shift. Turn the Dimmer dial to
the right to increase brightness and to the left to decrease 1: Common (Shield)
brightness. 2: Data –
3: Data +
Color Mode: 4: not connected
When the power switch is turned to Color mode
Dimmer Dial & 5: not connected
(down position), the IS3 will output many vibrant colors. The
Display first dial adjusts the Hue value of the color output.
The second dial adjusts the Saturation value of the color out- ZyLink Wireless:
put. Saturation can be dialed down for more pastel colors or The IS3 has the capability of being controlled from up to
kept at 100% for full saturation. 20m (66’) away wirelessly with the Zylight Remote
(available separately).
Hint: Press the Units button to change the de-saturation Color
Color Correction & Temperature. To enable ZyLink, push the Wireless button for one
DMX Start Address second until “Radio On” is displayed. Local control is still
(when in DMX mode) available while the ZyLink wireless Radio is set to “On”.
Dial & Display
Rapidly pushing the radio button after ZyLink is enabled
Rear Buttons: will allow the user to select any of 10 wireless channels
To communicate on. Select the channel and set the
identical channel on the Zylight Remote (see Remote
Color Temperature manual).
Dial & Display
To disable the wireless Radio, press the Wireless
button and hold for one second until “Radio Off” is
displayed.
UV Units Preset Buttons Future Use
Display
Button Limited Warranty:
On/Off & Mode Switch ZyLink Wireless Radio On/Off This instrument is covered for a period of 30 days for defects
& Channel Button in workmanship and 1 years of electronic operation. For
more information see www.zylight.com
ZyLink Wireless
Antenna Connector