Professional Documents
Culture Documents
mm ins
mm ins
The T-Match with its balanced feed point is one method of feeding a
Balanced Dipole. A suitable 4:1 balun is used in conjunction with the
T-Match to perform this function. The T-Match, with a 4:1 balun and Balanced
Dipole can be substituted for a Folded Dipole with its 4:1 coax balun. To
construct a 4:1 coax balun see the schematic and the Section on BALUNS for
coax selection and dimensions.
Adjustment of the T-Match with a 4:1 balun is simple - just adjust the
position of the shorts on the Arms until you get an acceptable SWR. For the
lowest SWR it may be necessary to change the length of the Driven Element.
After changing the driven element readjust for the lowest SWR.
SCHEMATIC: Balanced Dipole
--------------------------------------------
Spacing between Arms & | | Short
Dipole can be anything ---------------O O----------------
convenient for construction Bal Feed Arm
Adjustment of the T-Match with a 4:1 balun is simple - just adjust the
position of the shorts on the Arms until you get an acceptable SWR. For the
lowest SWR it may be necessary to change the length of the Driven Element.
After changing the driven element readjust for the lowest SWR.
___________________________________________________________________________________
_______
___________________________________________________________________________________
_______
mm ins
mm ins
mm ins
mm ins
___________________________________________________________________________________
___________________________________________________________________________________
________________
***** GENERAL CRITERIA FOR THE DESIRED ANTENNA *****
------------------------------------------------------------------------
*** Elements to be INSULATED FROM the boom by a boom diameter ***
1. DESIGN FREQUENCY : 575.00 Mhz
2. NUMBER OF ELEMENTS : 6
3. ELEMENT DIAMETER : 10.00 mm = 0.394 ins
4. BOOM DIAMETER : 25.00 mm = 0.984 ins
5. BOOM CORRECTION FACTOR 0.00 mm = 0.000 ins
6. DL6WU design with tapered spacing to optimise gain
mm ins
mm ins
mm ins