Material no. 1.0398 Mechanical properties 1) Available dimensions
according to DIN EN 10111 Hot-rolled coils unpickled, mill edge Tensile strength class A Nom. thick. e Yield strength R eL /Rp 0,2 < 2 mm 170 – 340 MPa Thickness in mm Width in mm ≥ 2 mm 170 – 320 MPa 1.50 – 1.79 900 – 1250 Usage 1.80 – 1.99 900 – 1390 These steel grades are characterised by Nom. thick. e Tensile strength Rm 2.00 – 2.24 900 – 1540 outstanding formability. They may be used ≤ 420 MPa 2.25 – 2.49 900 – 1700 for deep-drawing and forming by bend- 2.50 – 12.70 900 – 1880 ing. Nom. thick. e Total elongation A 2) Widths < 900 mm and thicknesses > 12.70 mm on The user of these steel grades must < 3 mm ≥ 26 % request make sure that his calculation, design and ≥ 3 mm ≥ 30 % processing methods are appropriate for the material. The forming technique used 1) The samples for the tensile test are taken at right angles to rolling direction unless the product width must be suitable for the intended appli- is opposed to this. Hot-rolled slit strip cation and comply with the state-of-the- 2) It applies to nominal thickness e: art. e < 3 mm: A80 Thickness in mm Width in mm For particularly complex forming op- e ≥ 3 mm: A5 1.50 – 1.79 100 – 515 erations, we offer steel grades DD14 Ti 1.80 – 1.99 100 – 635 (titaniumalloyed) and DD14 Bor (boron- 2.00 – 2.24 100 – 760 alloyed). 2.25 – 7.00 100 – 800 7.01 – 8.00 140 – 800 8.01 – 9.00 175 – 800 9.01 – 10.00 233 – 800
Chemical composition 1) 2) ≤100 mm on request
(in percent by weight)
min. max. Welding
C 0.100 % These steels can be welded using all Mn 0.450 % standard welding methods without pre- P 0.035 % heating. S 0.035 %
1) Heat analysis Condition of delivery, scope
2) Unless otherwise agreed in the order, nitrogenfix- of testing and certificate ing elements such as titanium and boron may be The provisions of EN 10111, shall apply added. for delivery and inspection, chapters 5.4 and 6.