Professional Documents
Culture Documents
Installing on HP-UX
SSH Tectia Server is available for:
Keep the operating system fully patched. See the required patches in System
Requirements. See the latest patch information on the Hewlett-Packard web
site. In case PAM/Kerberos is used, install also the latest patches related to
Kerberos.
Two packages are required: one for the common components of SSH Tectia
Client and Server, and another for the specific components of SSH Tectia
Server.
ssh-tectia-common-<ver>-sd-11.11-pa-risc.depot.Z
ssh-tectia-server-<ver>-sd-11.11-pa-risc.depot.Z
ssh-tectia-common-<ver>-sd-11.23-itanium.depot.Z
ssh-tectia-server-<ver>-sd-11.23-itanium.depot.Z
4. $ gunzip ssh-tectia-common-<ver>-sd-<arch>.depot.Z
5. $ gunzip ssh-tectia-server-<ver>-sd-<arch>.depot.Z
Note
In the commands, <path> is the full path to the installation
package. HP-UX requires the full path even when the command is
run in the same directory.
9. The server host key is generated during the installation. The key
generation may take several minutes on slow machines.
10. (Not necessary in "third-digit" maintenance updates.) Copy the
license file to the /etc/ssh2/licenses directory. See Licensing.
Note
If the server does not start (for example because of a missing
license or because some other secure shell software is running on
port 22), you can start it after correcting the problem by issuing
the command: