Mobile Crane Pre-Hire Inspection Checklist
Item Description ‘Current Condition
‘movement in the event of hose failure. —
Facility for emergency lowering of loads.
Temperature sensing devices, audio or visual type, or equivalent =
safeguards to give adequate protection to the prime mover and associated
equipment.
Emergency stop with manual re-set capability within crane operator reach, re
‘Motion control levers that return to neutral with a minimum delay upon |
release — this does not apply to engine throttle lever. cane
All pneumatic, hydraulic and electrical connections clearly tagged/marked,
corresponding to the markings on the crane circuit drawings. ae
Emergency escape route for personnel. ==
Safety latches that automaticaly close fitted to all integral crane hooks.
SWL of the hook block prominently marked and highlighted on the hook. ==
Calibrated automatic SWL Indicator shall be fitted and a legible crane i
capacity chart prominently displayed. 2
Outriggers and hooks clearly marked with a red and white chevron
pattem, ae
Crane hooks secured to ensure no swinging occurs in transit. =
‘Audible and visual alarms, which shall sound continuously when the crane
slewing is set on cick
Telescopic boom wear pads ==
‘Automatic digital SLI system shall be checked and verified against known =
weights for all the parameters.
Safety devices such as overload cut-off system, anti-two block, jb hoist =
cut-off, working area control devices, boom locking system, and winch
drum locking devices, etc. shall be checked for their correct functioning
Condition ofthe slewing machinery system including slewing gear, eS
bearing, slewing brake, slewing lock etc. shall be checked.
Counter weight locking pins/bolts shall be checked for correct anchorage.
The correct number of counter weights shall be fitted on the crane in oa
compliance with the manufacturer's recommendations.
Current load test and visual inspection certificate. WeMA TW Aah - 22
‘Maintenance and repair logbook =
Operating Manual is
Safety Manual = |
rane identification Number: \ 7 TCX TYP\\ | wspeassay 7 agk
Crane Truck Registration Number: ay Tete
Operator Name: Kjourex wie
Operator License/Certificate No:C C= \ Q-'B2s-JR
FeV Name tad
Page 2 of 2Mobile Crane Pre-Hire Inspection Checklist
Item Description
Current Condition
Engine
Boom Section (Telescopic booms/fly jbs shall be visually inspected on all
sides, section by section, in its extended/erected condition)
Fly ib
Main Hoist Rope (How many parts and Length)
‘Auxiliary Hoist Winch
Electrical System
Lighting, Horns
Tires
Hydraulic System
Outriggers
Carrier
‘Wind Shield / Mirror
Hookblock (Hook block sheaves/boom head sheaves shall be thoroughly
inspected to ensure that there are no visible cracks or any damage)
Safety Latch
‘Sheaves
‘Swing Mechanism
Brake System
Tyres
Control Levers (Operating levers and switches that are clearly identified
and marked, All markings shall be in English or internationally agreed
symbols)
Rotating Warning Lights
Backup Alarm and Light
Fire Extinguisher
Power Unit (Upper)
Spark Arrestor
wh
General Condition, Paint ete
Wire Rope Replacement Date
| Suitable operating cab that adequately protects the crane operator and air
conditioned
Hoisting limit device that, when actuated, stops the hoisting motion and
applies the brake on the hoisting winch automatically.
Luffing limit device that, when actuated, stops the luffing motion and
applies the brake on the luffing winch automatically, and that is so
arranged as to prevent bypassing of this device in the normal operation of,
the crane,
Engine stop systems that operate in a manner such that the engine comes
to rest with minimum delay.
WAL AWWAAIY ANAT ARRAN 1
‘Check valves shall be fitted to all hydraulic cylinders to prevent cylinder
Forck None Cob
OAFENAS Rev?
Page 1 of 2