• ABCO recommends butt weld unions for sour gas service. • Sour gas unions will feature viton seals as standard. Other elastomers are special order. • Sour gas unions will be painted green. Figure 100 Figure 200 • Cold working pressure -1,000 psi (69 bar). • Cold working pressure - 2,000 psi (138 bar). • Low pressure union. Manifold and • General purpose union. general service. • Threaded and butt weld ends.
Figure 206 Figure 207
• Cold working pressure - 2,000 psi (138 bar). • Cold working pressure - 2,000 psi (138 bar). • ‘O’ ring in metal sub improves sealing and • Manifold and blanking the end of line - ‘O’ ring extends service life. cap provides leak-free seal - threaded • Cup and cone provide “zero clearance and weld end. against extrusion” • Connection cap can be tapped for pressure • Threaded and butt weld end connections. gauge or valve.
Figure 300 Figure 400
• Cold working pressure - 2,000 psi (138 bar). • Cold working pressure - 4,000 psi (276 bar) • ‘Flat Face’ design facilitates straight breakout of 2" through 4" sizes, for 5” to 12” sizes cold working connected components such as valve or fittings pressure is 2,500 psi (172 bar). for repair or inspection. • Mainly used for manifold pumping and mud. • Moderate vacuum service insulating unions available on special order. .
Figure 600 Figure 602
• Cold working pressure - 6,000 psi (414 bar). • Cold working pressure - 6,000 psi (414 bar). • Used for steam service, well servicing and • Lip type elastomer seal protects metal-to-metal boiler connection. seal and seal design reduces turbulence in the line. • Primary seal is bronze to prevent corrosion and • Usage mainly in manifold and mud services. absorb expansion and contraction. • Available with non-pressure thread sealing ends.
Figure 1002 Figure 1003
• Cold working pressure - 10,000 psi (690 bar) 1" through • Cold working pressure - 10,000 psi (690 bar) 4" sizes, for 5" and 6" sizes, cold working pressure is 2" through 3" sizes, for 4" to 5" sizes, cold working 7,500 psi (517 bar). pressure is 7,500 psi (517 bar). • Field replaceable lip type elastomer seal protects • These misaligning unions are used in high pressure secondary metal-to-metal seal. applications where the lines are not aligned. • 7° line misalignment accepted.
Figure 1502 Figure 2202
• Cold working pressure - 15,000 psi (1,034 bar). • Cold working pressure - 15,000 psi (1,034 bar). • Used mainly in choke/kill lines, cementing, fracturing • Used in sour gas services. and testing. • Meets Nace MR-01-75 standards. • Available in threaded, welded, butt weld and • Butt weld only. non-pressure thread sealing ends. • Painted green for easy identification.