Professional Documents
Culture Documents
2. How many consecutive empty positions does the VersaCell X3 system detect before it
assumes the rest of the drawer is empty?
a. Any number
b. Zero
c. Four
d. Five
3. Where is the button located that is used to put the VersaCell X3 system into Run mode?
a. The Command Bar at the top of the screen
b. The Status Bar at the bottom of the screen
c. The vertical toolbar
4. The buttons used to open VNC in the VersaCell X3 system software display which of the
following?
a. A picture of two connected screens
b. The name of the connected instrument
c. The text “VNC”
d. Directional arrows indicating the location of the connected instrument
5. When the priority drawer is closed, which positions does the robotic arm scan?
a. All the priority drawer positions
b. It depends on whether the operator selects to “Resume from Last Position” or “Start
from First Position” in the software
c. Only the positions which were previously empty
6. On the VersaCell X3 system Home screen, what is one indication of an error on the
connected instruments?
a. A yellow or red triangle next to the instrument icon
b. The instrument icon is circled in red
c. A red “X” through the instrument icon
7. Which of the following tasks can be performed on the Tests Results screen?
a. Resend tubes to the connected instrument
b. Order a repeat test
c. Export the event log
d. Resolve assay errors