ruTABLE OF CONTENTS
4 Introduction,
11 Scope.
4.2 Principle of Measurement
2 Terminology
3 Operating Conditions ..
3.4 Gas Quality cane
3.2 Prosaures.
3.3 Temporatures, Gas and Ambiont
3.4 Gas Flow Considerations
2.5 Upstream Piping and Flow Profiles.
‘4 Meter Requirements
441 Codes and Regulations...
4.2 Motor Body.
“42.1 Maximum Operating Pressure
4622 Coreaion Resistant nen
{422 Meter Body Lengths sna Boros
424 UtraconieTranacueer Ports.
425 Pressure Tap
428 mincolanaote
4.27 Note Body Markings
443 Ultrasonic Transducers
143.1 Speciation wen
4632 Rate of Pressure Change,
433 Exchange: iat
AA Ele Ctr0nI08 nen
4444 General Requires nn
4442 output Signal Spocieations
443 Electrical Safety Design Roqulroments.
45 Computer Programs.
464 FMW" a
45.2.Configuration and Maintonance Sofware.46 Documentation.
65 Performance Requirements.
s
3
s.
6 Individual Meter Testing Requiromonts..
ai
6
6
65 Quality Assurance...
7 Installation Requirements
1
2.
4.53 inspection and Auaiting Functions.
BBA ALRITE enorme
455 Olagnoetc Moasurerents.
‘4566ngineening Units
{4.8.4 After Receipt of Oder
45.2 Before Shipment...
4 Definitions.
2General =E
15241 Large Meter Aceuracy
5.2.2 Small Matar AceuraeY nn i
{3 Pressure, Temperature and Gas Composition Influences:
A Leakage Tests
2 Dimensional Measurements.
2 Zero-Flow Verification Tost Zero Test)
4 Flow-Calioration Feat. oe 14
{84.1 Calibration Factore Adjustment. renee rere
54.2 Teat Reports. en
‘4 Environmental Considerations...
7.4 Femparature
FAB Vibrio on
743 Electrical Nols.
2 Piping Configuration
7.24 Flow DiraeOn on
7.22 Piping inetallations..
12 Proton
Ta dinternal Surface
128 Trermowelle on
726 Aeouste Noise Interference
727 Flow Conditionore..—
72.8 Oriontatsan of stor.
TS FAti0n nnn173 Associated Flow Computer
74 Manton 66 ee
8 Field Verification Test. =
9 Reference List sree
APPENDIX A : Multipath Utrasonic Motor Flow-Calibration Issues se At
[APPENDIX B : Electronic Design Testing — a standardized set of intornational
tosting specifications applicable to electronic g28 meters sn.unuewe BA
APPENDIX C: AGA Engineering Technical Note M.96-2:3, Ultrasonic Flow
‘Measurement for Natural Gas Applications, March 1996 ot
FORM FOR PROPOSALS ON AGA REPORT NO. 8. sm PA