BENCHMARK
GPmark™ DETAIL Xmark™ DETAIL
a 0.125
| See Note 2
Ze
Bevel Dia.
NOTES:
1. Lead tolerance:
a. For 2 inches +0.006 inch.
b. Recut threads if stretch exceeds 0.006 inch in 2 inches.
2. Either benchmark type is applicable but not both
a. GPmark: 0.125 is new condition, shall be 0.188 max. after refacing,
b. Ximark: 0.063 is new condition, After refacing a visible step
an the benchmark shall remain on the primary shoulder.
Rethreading is required if there is no visible benchmark.
3. At Outside Diameter less than 4.625 Bevel Diameter is void
and 1/32” x 45° becomes effective.
4, Surface firish requirement only apples during refacing operation
5. Area of the connection where pitting is not permitted in the thread roots.
See Benchmark
\L Pit Free Zone
4.402 $83 ——-|
(PIN CONNECTION LENGTH)
PRIMARY MAKE-UP
‘SHOULDER (EXTERNAL|
Yj o | _
CLLLZIZ.
SEAL)
od
2.969 +2088
2.969 Hot
(Pin Nose Diameter)
__l
x0 Thread Taper 2.000 per ft.
See Note 4 ‘
Break Edge
Threads per inch
1/32" Max. x 45° Ref
See Note 3
2| eeees8e
&| Sigiglasi§
Assigned % S| SERS SES
tele
By: BE2S
Date: kK Leelee
Grant Prideco) yo cauces are
DIMENSIONS wTHOUT)
GPDS™ 38 Pin
FIELD INSPECTION DIMENSIONS
NOY 8222... FOR REFERENCE
INFORMATION. ONLY
ain Sons ae be -
Pesceerrne Tay [2/0
lowed reels
[ieee aeons ets
rm" 1F022 [as Pod