(A) Put A Suitable Container or Shop Towel Under The Injector Pipe. (B) Remove The Union Bolt and Two Gaskets, and Disconnect The Injector Pipe. HINT: Slowly Loosen The Union Bolt
(A) Put A Suitable Container or Shop Towel Under The Injector Pipe. (B) Remove The Union Bolt and Two Gaskets, and Disconnect The Injector Pipe. HINT: Slowly Loosen The Union Bolt
BATTERY CAUTION (w/ Airbag): Work must be started after approx. 30 seconds or longer from the time the ignition switch is turned to the ”LOCK” position and the negative (–) termi- nal cable is disconnected from the battery. 2. DISCONNECT COLD START INJECTOR CONNECTOR
3. DISCONNECT COLD START INJECTOR PIPE (No.2 FUEL
PIPE) (a) Put a suitable container or shop towel under the injector pipe. (b) Remove the union bolt and two gaskets, and disconnect the injector pipe. HINT: Slowly loosen the union bolt.
4. REMOVE COLD START INJECTOR
Remove the two nuts, cold start injector and gasket.
Downloaded from www.Manualslib.com manuals search engine