TECHNICAL DATA SHEET BANDO
Date Tuesday, October 01, 2019
Ref. Number 282/BVSE-TS/X/2019
User PT. MUTIARA TANJUNG LESTARI (PT. BERAU COAL Line CV-33)
Manufacturer PT. BANDO INDONESIA
Country of Manufacture INDONESIA
Belt Specification + 1000mm x EP-630 / 4P x 6.0mm x 3.0mm x 315 Mtrs
Cover Rubber Grade-M
Brand BANDO
Cover Rubber Grade-M Carcass. Polyester — Nylon
4. Table of Belt Size
Belt width Number of Cover thickness. ‘Cover Belt length
(mom) Ph Top {mm) | Bottom (my [Oe fF oArCAS5) ade. (Mtrs)
1000 4 6.0 3.0 EP-630/4P_ Grade-M 315,
2. Table of Estimated Drum Size
Belt Estimated [dum
Thickness Weight Length] Numberof | Diameter | Gross Weight | Voume
{mm ) (kgimtr ) (Mtrs ) Drum (mtr) {ton ) {m*)
73:00 4.17 315.0 1 2.56 5.36 7.87,
3. Construction of Belt
‘Top cover rubber
———————
Bottom cover rubber
4, Standard Value
‘The test results should meet the following standard value
‘The testing methods of Belting are in conformity with : JIS K 6322 — 1999
A. Tension Test of Carcass
Tensile swengih | Elongation at 10% of specified
Cord of
ferme (katie) tensile strengin
Epasosap [morethan gay] Lensthan 4
B. Cover Rubber Test
Performance of cover
Test | Unit
tem 2 rubber
Before | Tensile srengih ‘lon =250
Tensile [Aging [Elongation % = 450
Test After * | Change rato of Tensle stengih % 25
Aging | Change rate of Elongation % £28
Abrasion test | Abrasion toss = 120
* Condition of aging test is as described under : Temperature 70: 1
4
C. Adhesion Test Mean value in kgf/25mm. C
Top cover rubber 6 ply more than iF > >
i )
Ply to ply more than 9
Ply to bottom cover rubber more than 9
ino Surya Wilava ~ " sutiyo
Sales Engineering SE. Manager
F-00-Sis-42-00